Abstract:In the present study, an electrochemical glucose biosensor has been developed based on nano-copper oxide micro hollow spheres. The nano-copper oxide micro hollow spheres were synthesized via hydrothermal method using pluronic F-127 as a surfactant. For structural characterization of CuO hollow sphere structures, the scanning electron microscopy and X-ray diffraction spectroscopy were applied. The performance parameters of the sensor were improved by optimizing the modification process. The electrochemical characteristics of the proposed glucose biosensor were investigated by using cyclic voltammetry and chronoamperometry techniques in both 0.1 M and 1 M NaOH solutions. The results revealed that the proposed electrode has a wide dynamic range from 1 µM to 11.50 mM for glucose detection at 0.1 M NaOH solution which covers two linear ranges from 1 µM to 3 mM and from 3 mM to 11.50 mM. The sensitivities of the two linear ranges were obtained as 25.0 ± 0.8 µA·mM−1·cm−2 and 13.6 ±0.3 µA·mM−1·cm−2, respectively. An extremely wide linear range from 1 µM to 16 mM with a sensitivity of 35.2 ± 0.4 µA·mM−1 cm−2 was achieved for the 1 M NaOH solution. The sensor achieved a 1 µM practical lowest limit of detection which is an excellent low limit of detection at both NaOH concentrations compared to some important previously reported works. In addition, the good tolerance toward the interfering species and the satisfactory behavior in real sample analysis verified the promising performance of the proposed sensor.

An electrochemical sensor based on copper oxide nanoparticles loaded on a mesoporous MCM-41 for non-enzymatic detection of glucose

A Highly Sensitive Nonenzymatic Glucose Sensor Based on Cu/Cu2O Composite Nanoparticles Decorated Single Carbon Fiber

Cu/Cu 2 O/C nanoparticles and MXene based composite for non-enzymatic glucose sensors

Fabrication of Non-enzymatic Electrochemical Glucose Sensor Based on Nano-copper Oxide Micro Hollow-spheres

A Non-Enzymatic Glucose Sensor Based on CuO-nanostructure Modified Carbon Ceramic Electrode

Cu-Doped ZnO Nanoparticles for Non-Enzymatic Glucose Sensing

Copper-based Metal-organic Framework for Non-enzymatic Electrochemical Detection of Glucose

Sensitive electrochemical nonenzymatic glucose sensing based on anodized CuO nanowires on three-dimensional porous copper foam

A highly sensitive nonenzymatic glucose sensor based on CuO nanoparticles-modified carbon nanotube electrode.

Cu2O-Based Electrochemical Biosensor for Non-Invasive and Portable Glucose Detection

Synthesis of Copper Nanoparticles in the Ordered Mesoporous Carbon (cu@omc) for Glucose Detection

A Novel Non-Enzymatic Glucose Sensor Based on Cu Nanoparticle Modified Graphene Sheets Electrode

A Non-Enzymatic Glucose Sensor Based on Copper Oxide Nanowires-Singlewall Carbon Nanotubes

Nanoporous CuZn supported CuO nanoparticle electrodes for non-enzymatic electrochemical glucose detection

Construction of a non-enzymatic glucose sensor based on copper nanoparticles/poly( o -phenylenediamine) nanocomposites

Copper Nanoparticle/Graphene Oxide/Single Wall Carbon Nanotube Hybrid Materials As Electrochemical Sensing Platform for Nonenzymatic Glucose Detection

A Sensitive and Selective Non-Enzymatic Glucose Sensor Based on AuNPs/CuO NWs-MoS2 Modified Electrode

Electrochemical Non-Enzymatic Glucose Sensors Based on CuO Nanostructures

Fabrication of Nanoporous Copper Oxide Film Biosensor with a Polymer Sphere Template and Its Application to Glucose Sensing

An Electrochemical Nonenzymatic Microsensor Modified by CuCo2O4 Nanoparticles for Glucose Sensing

CuO nanowires based sensitive and selective non-enzymatic glucose detection