Abstract:The demand for metal lithium and its compounds has increased in recent years especially in green energy technology. In this paper, adsorption equilibrium and kinetic performance of shaped titanium-based lithium ion sieve (HTO-P) for lithium ion (Li+) in Qinghai West Taijinar Salt Lake brine (abbreviated as West Taijinar brine) before and after ammonia (1 mol/L) were investigated. The results show that the equilibrium adsorption capacity of Li+ from West Taijinar brine after the adjustment of ammonia (abbreviated as West Taijinar brine-ammonia) by HTO-P is 19.22 mg/g at 30 oC with the solid/liquid ratio of 5 g/L for 24 h, which is 86.60% higher than that of West Taijinar brine. The separation factor α of HTO-P for Li+/Mg2+ in West Taijinar brine-ammonia is 1266.41. The equilibrium adsorption behavior of Li+ on HTO-P in West Taijinar brine and West Taijinar brine-ammonia can be described by the Freundlich model (the correlation coefficient R2 > 0.998). The adsorption kinetic performance of Li+ conforms to the Mixed Order kinetic model (MO) with R2 over 0.995. The adsorption mass transfer rate at the active site (h2') greatly accelerated after adding NH3·H2O, which proves that the number of active sites raise after the increase of pH in West Taijinar brine. The H+ exchanged from HTO-P can be directly consumed by NH3·H2O, thus improving the mass transfer rate of Li+ and promoting the occurrence of ion exchange adsorption. This work provides basic data on the adsorption extraction process of lithium ion from brine with high Mg2+/Li+ ratio by the shaped titanium-based lithium ion sieve.

Adsorption of Lithium from Shale Gas Produced Water Using Titanium Based Adsorbent

Lithium extraction from shale gas flowback and produced water using H1.33Mn1.67O4 adsorbent

Inorganic Porous Carbon As the Supporter of H2TiO3 Via In-Situ Polymerization Synchronous Conversion for Lithium Recovery from Aqueous Solutions

Application and limitations of a H2TiO3 – Diatomaceous earth composite synthesized from titania slag as a selective lithium adsorbent

Inorganic porous carbon as the supporter of H 2 TiO 3 via in-situ polymerization synchronous conversion for lithium recovery from aqueous solutions

Lithium extraction from geothermal brine by granulated HTO titanium-based adsorbent with block-co-polymer poly (ethylene-co-vinyl alcohol) (EVAL) as binder

Lithium ion sieve synthesized via an improved solid state method and adsorption performance for West Taijinar Salt Lake brine

Hydrothermal synthesis and adsorption behavior of H4Ti5O12 nanorods along [100] as lithium ion-sieves

Manganese-Titanium Mixed Ion Sieves for the Selective Adsorption of Lithium Ions from an Artificial Salt Lake Brine

Hydrophilic surface-modified titanium-based lithium ion sieve adsorbents for efficient lithium extraction

Synthesis of porous fiber-supported lithium ion-sieve adsorbent for lithium recovery from geothermal water

Lithiothermic Reduced TiO2 for Efficient Adsorption of Li‐ion

Study on adsorption extraction process of lithium ion from West Taijinar brine by shaped titanium-based lithium ion sieves

Metal-based adsorbents for lithium recovery from aqueous resources

Electricity facilitates the lithium sorption from salt-lake brine by H3LiTi5O12 nanoparticles: Kinetics, selectivity and mechanism

Enhanced lithium extraction from aqueous solutions using multi-scale modified titanium adsorbent

Effect of Buffer on Direct Lithium Extraction Process of Tibetan Brine by Formed Titanium-based Lithium Ion Sieves

A novel Co-doped H 2 TiO 3 spinning composite for efficient lithium recovery from alkaline lithium precipitation mother liquor

Highly selective separation of lithium with hierarchical porous lithium-ion sieve microsphere derived from MXene

Titanium-based ion sieve with enhanced post-separation ability for high performance lithium recovery from geothermal water

Prelithiation-derived hierarchical TiO2 sieve with metal-organic framework gate for selective lithium recovery