Study on adsorption extraction process of lithium ion from West Taijinar brine by shaped titanium-based lithium ion sieves

Xuanlin Zhu,Huihui Yue,Wenjun Sun,Lin Zhang,Qun Cui,Haiyan Wang

DOI: https://doi.org/10.1016/j.seppur.2021.119099

IF: 8.6

2021-11-01

Separation and Purification Technology

Abstract:<p>The demand for metal lithium and its compounds has increased in recent years especially in green energy technology. In this paper, adsorption equilibrium and kinetic performance of shaped titanium-based lithium ion sieve (HTO-P) for lithium ion (Li⁺) in Qinghai West Taijinar Salt Lake brine (abbreviated as West Taijinar brine) before and after ammonia (1 mol/L) were investigated. The results show that the equilibrium adsorption capacity of Li⁺ from West Taijinar brine after the adjustment of ammonia (abbreviated as West Taijinar brine-ammonia) by HTO-P is 19.22 mg/g at 30 ^oC with the solid/liquid ratio of 5 g/L for 24 h, which is 86.60% higher than that of West Taijinar brine. The separation factor α of HTO-P for Li⁺/Mg²⁺ in West Taijinar brine-ammonia is 1266.41. The equilibrium adsorption behavior of Li⁺ on HTO-P in West Taijinar brine and West Taijinar brine-ammonia can be described by the Freundlich model (the correlation coefficient R² &gt; 0.998). The adsorption kinetic performance of Li⁺ conforms to the Mixed Order kinetic model (MO) with R² over 0.995. The adsorption mass transfer rate at the active site (h₂') greatly accelerated after adding NH₃·H₂O, which proves that the number of active sites raise after the increase of pH in West Taijinar brine. The H⁺ exchanged from HTO-P can be directly consumed by NH₃·H₂O, thus improving the mass transfer rate of Li⁺ and promoting the occurrence of ion exchange adsorption. This work provides basic data on the adsorption extraction process of lithium ion from brine with high Mg²⁺/Li⁺ ratio by the shaped titanium-based lithium ion sieve.</p>

engineering, chemical

What problem does this paper attempt to address?

This paper attempts to address the issue of efficiently extracting lithium ions from the brine of the Xitai Jiner Salt Lake in Qinghai. Specifically, it investigates the adsorption and extraction process of lithium ions by the shaped titanium-based lithium ion sieve (HTO-P) before and after ammonia water adjustment. By adjusting the pH value of the brine, the study examines the adsorption equilibrium, kinetic performance, and selective separation ability of lithium ions to improve the adsorption capacity and separation factor of lithium ions. Additionally, it explores the effects of different solid-liquid ratios, the amount of ammonia water added, and other factors on the adsorption performance of lithium ions, providing fundamental data for practical applications.