Abstract:The demand for lithium resources continues to increase due to the rapid development of electronic vehicles, energy storage equipment, and other electronic products. Extracting lithium from salt lake brines is of great significance because of the predominance of brine lithium resources. Because both sodium and lithium ions are monovalent cations and have similar chemical properties, it is difficult to extract lithium from high-sodium brine. Herein, an adsorption-coupled electrochemical (ACEC) technology was utilized for lithium extraction. Manganese oxide coated with an ultrathin (1–2 nm) carbon layer ( MnOx@C), obtained by a precursor method, is utilized as a membrane electrode in a membrane capacitive device. The crystal structure and carbon layer thickness of MnOx@C are effectively controlled by adjusting the preparation conditions. When the core is mainly a MnO phase, the lithium extraction capability of the membrane electrode is significantly improved. The lithium adsorption capacity reaches as high as 51.8 mg/g, and the adsorption time is 550 s from high-sodium brine (Na/Li ratio = 48.6). The desorption rate of lithium ions is 91.3% during a reverse process. Compared with either membrane capacitance or adsorption methods, the adsorption capacity reached with this technology is in the lead. The synergy of adsorption and Faradaic redox reactions leads to remarkably enhanced lithium extraction capability. This ACEC technology provides an alternative pathway to extract lithium from brines with high efficiency and facile operation.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02442.Calculation details, schematic diagram, XRD patterns, Raman spectra, N2 adsorption–desorption isotherms, XPS spectra, Mn species analyses, relation profile of lithium-ion concentration and conductivity, and sodium-ion concentration change profile (PDF)This article has not yet been cited by other publications.

Bifunctional Modification Enhances Lithium Extraction from Brine Using a Titanium-Based Ion Sieve Membrane Electrode

Hydrophilic Modification Using Polydopamine on Core–Shell Li 1.6 Mn 1.6 O 4 @Carbon Electrodes for Lithium Extraction from Lake Brine

Lithium extraction from brine through a decoupled and membrane-free electrochemical cell design

Enhancement of Lithium Extraction from Low Grade Brines by High Hydrophilic Blend Membrane Using Mno 2 Ion Sieve As Adsorbents

2D Membranes Interlayered with Bimetallic Metal-Organic Frameworks for Lithium Separation from Brines

Lithium Extraction Via Capacitive Deionization: AlF3 Coated LiMn2O4 Spheres for Enhanced Performance

A Nano‐Heterogeneous Membrane for Efficient Separation of Lithium from High Magnesium/Lithium Ratio Brine

Enhancement of lithium extraction from low grade brines by highly hydrophilic blend membranes using MnO 2 ion sieve as adsorbents

Highly Efficient Lithium Extraction from Brine with a High Sodium Content by Adsorption-Coupled Electrochemical Technology

Enhancing lithium extraction efficiency from salt lake brines through three-dimensional conductive network-incorporated thick electrodes

Manganese-Titanium Mixed Ion Sieves for the Selective Adsorption of Lithium Ions from an Artificial Salt Lake Brine

Enriching Lithium and Separating Lithium to Magnesium from Sulfate Type Salt Lake Brine

Effect of Buffer on Direct Lithium Extraction Process of Tibetan Brine by Formed Titanium-based Lithium Ion Sieves

Structural/surficial dual regulated granular H2TiO3 lithium-ion sieves for lithium extraction from salt lake brine

An Ultrastable RA-LiMn2O4 Lithium-Ion Sieve for Lithium Extraction from Brine

Fine-Tuning 2D Heterogeneous Channels for Charge-Lock Enhanced Lithium Separation from Brine

Electrochemical recovery lithium from brine via taming surface wettability of regeneration spent batteries cathode materials

Study on extraction of lithium from salt lake brine by membrane electrolysis

Highly selective separation of lithium with hierarchical porous lithium-ion sieve microsphere derived from MXene

Solid-State Electrolyte for Lithium Extraction from Salt Lake Brines

Lithium extraction from high Mg/Li brine via electrochemical intercalation/de-intercalation system using LiMn2O4 materials