A Nano‐Heterogeneous Membrane for Efficient Separation of Lithium from High Magnesium/Lithium Ratio Brine

Huawen Peng,Qiang Zhao

DOI: https://doi.org/10.1002/adfm.202009430

IF: 19

2021-01-27

Advanced Functional Materials

Abstract:<p>Lithium extraction from salt lake brines is highly demanded to circumvent the lithium supply shortage. However, polymer nanofiltration membranes suffer from low lithium permeability while nanofluidic devices are hindered by complicated preparation and miniaturized scales despite high permeability. Here, the authors report a facile strategy to prepare positively charged nanofiltration membranes for ultrapermeable and selective separation of lithium ions from concentrated magnesium/lithium mixtures. A new electrolyte monomer (diaminoethimidazole bromide, DAIB) containing bidentate amine groups is designed to modify pristine polyamide composite membranes. Structure characterizations and simulations show that the DAIB modification brings about nano‐heterogeneity that not only improves surface hydrophilicity, but also reduces water transport resistance through the ≈100 nm thick separation layer. Water permeance of the modified membrane improves fivefold and is coupled with good stability in 200‐h continuous nanofiltration. It exhibits high lithium flux (0.7 mol m⁻² h⁻¹) for brines (Mg²⁺/Li⁺ ratio 20) at 6 bar operation pressure.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

What problem does this paper attempt to address?

This paper attempts to solve the problem of efficiently separating lithium ions from brines with a high magnesium - to - lithium (Mg/Li) ratio. Specifically, currently, there is a high demand for lithium extraction from salt - lake brines, but the traditional polymeric nanofiltration membranes have the problem of low lithium permeability, while nanofluidic devices, although having high permeability, are complex to prepare and are tiny in size, making it difficult to be widely applied.

To solve these problems, the authors proposed a simple method to prepare positively - charged nanofiltration membranes to achieve highly efficient and selective separation of lithium ions from high Mg/Li ratio mixtures. By designing a new electrolyte monomer - diaminoglyoxime imidazole bromide (DAIB), which contains bidentate amine groups, the original polyamide composite membrane can be modified. This modification not only improves the hydrophilicity of the membrane surface but also reduces the transport resistance of water through the approximately 100 - nm - thick separation layer.

The following are some key points in the paper:

1. **Problem Background**:
- Lithium resources are crucial for high - tech products (such as batteries, ceramics, glass, and alloys).
- Salt - lake brines account for about 70% of the recoverable lithium resources on the earth, but they have a relatively high concentration of magnesium ions.
- Extracting lithium from brines with a high Mg/Li ratio is challenging, and traditional methods have problems of resource loss and wastewater treatment.

2. **Research Objectives**:
- Develop an efficient and economical membrane material for lithium extraction from brines with a high Mg/Li ratio.
- Improve the selectivity and permeability of lithium while maintaining the stability and ease of preparation of the membrane.

3. **Solutions**:
- Design and synthesize the strong electrolyte monomer DAIB containing bidentate amine groups.
- Use DAIB to perform surface modification on the thin - film composite polyamide membrane (TFCM).
- The experimental results show that the DAIB - modified membrane has a significant increase in water flux and lithium permeability and has a good rejection effect on magnesium ions.

4. **Experimental Results**:
- The water flux of the DAIB - modified membrane has increased five - fold, the lithium flux has reached 0.7 mol m\(^{-2}\) h\(^{-1}\), and it has shown good stability during 200 - hour continuous nanofiltration.
- Under an operating pressure of 6 bar, the rejection rate of the DAIB membrane for MgCl\(_2\) is 95.8%, and for LiCl is 55.6%.

In conclusion, this research has successfully solved the problem of efficiently separating lithium ions from brines with a high Mg/Li ratio by designing the new monomer DAIB, providing new ideas and technical means for the sustainable utilization of lithium resources.