Abstract:Li2TiO3 precursor with layered structure is successfully prepared by template‐free method using anatase TiO2 and Li2CO3, followed by the treatment of dilute hydrochloric acid, which leads to obtaining H2TiO3 lithium ion sieve nanoparticles with uniform dispersion and small size. The adsorption performance and mechanism of the H2TiO3 are being studied. The experimental results show that the H2TiO3 lithium ion sieve has a large BET specific surface area (19.10 m2 g−1) and good thermal stability. At the same time, it also has a high adsorption rate and adsorption capacity (55.13 mg g−1) towards Li+ in solution due to its high dispersibility and uniformity of particle size, which can expose more adsorption sites in LiCl solution. The adsorption capacity of the H2TiO3 lithium ion sieve can reach 46.63 mg g−1, which achieves 84.58% of the equilibrium adsorption capacity. The equilibrium adsorption parameters follow the Langmuir model perfectly, demonstrating that Li+ undergoes monolayer adsorption. The results of thermodynamic and kinetic analysis show that the adsorption behavior of H2TiO3 is spontaneous and conforms to the pseudo‐second‐order kinetic model, indicating the adsorption process is controlled by chemosorption. In addition, after five adsorption/desorption cycles, the H2TiO3 lithium ion sieve still shows a high adsorption capacity of 46.15 mg g−1, and the dissolution loss of titanium is only 0.14%, which shows that the cycle stability is excellent. XPS and zeta potential analyses illustrate that the adsorption mechanism of Li+ on the H2TiO3 is an ion exchange reaction between Li+ and H+, combined with the electrostatic attraction of the adsorbent surface. Additionally, the adsorption performance of H2TiO3 lithium ion sieve in West Taijinaier Salt Lake brine was tested, and the adsorbent material proves itself is a perspective candidate for lithium extraction from aqueous lithium resources.

Preparation of granular titanium-type lithium-ion sieves and recyclability assessment for lithium recovery from brines with different pH value

Synthesis of High Specific Surface Lithium-Ion Sieve Templated by Bacterial Cellulose for Selective Adsorption of Li+

Hydrothermal synthesis and adsorption behavior of H4Ti5O12 nanorods along [100] as lithium ion-sieves

Study on adsorption extraction process of lithium ion from West Taijinar brine by shaped titanium-based lithium ion sieves

Manganese-Titanium Mixed Ion Sieves for the Selective Adsorption of Lithium Ions from an Artificial Salt Lake Brine

Research Progress on New Types of H2TiO3 Lithium-Ion Sieves: A Review

Titanium-based ion sieve with enhanced post-separation ability for high performance lithium recovery from geothermal water

Structural/surficial dual regulated granular H2TiO3 lithium-ion sieves for lithium extraction from salt lake brine

Prelithiation-derived hierarchical TiO2 sieve with metal-organic framework gate for selective lithium recovery

Zr-doped titanium lithium ion sieve and EP-granulated composite: Superb adsorption and recycling performance

Inorganic Porous Carbon As the Supporter of H2TiO3 Via In-Situ Polymerization Synchronous Conversion for Lithium Recovery from Aqueous Solutions

Synthesis of High Specific Surface Lithium ion Sieve Templated by Bacterial Cellulose for Selective Adsorption of Li+

Highly selective separation of lithium with hierarchical porous lithium-ion sieve microsphere derived from MXene

Preparation, Characterization, and Adsorption Performance of H2TiO3 Lithium Ion Sieves with Homogeneous Nanoparticles: Kinetics, Thermodynamics, and Mechanism Analysis

Inorganic porous carbon as the supporter of H 2 TiO 3 via in-situ polymerization synchronous conversion for lithium recovery from aqueous solutions

Peculiar shuttle-like nano-sized TiO(OH)2/C lithium ion sieve with improved adsorption rate and cycling reliability: Preparation and kinetics

Synthesis and Characterization of Titania Nanoribbons for Lithium Selective Adsorption

Recovery of Lithium Ions From Salt Lakes Using Nanofibers Containing Zeolite Carriers

Al and Cr ions co-doped spinel manganese lithium ion-sieve with enhanced Li + adsorption performance and structural stability

Synthesis of H2TiO3-PVC lithium-ion sieves via an antisolvent method and its adsorption performance

Electrochemical Properties and the Adsorption of Lithium Ions in the Brine of Lithium-Ion Sieves Prepared from Spent Lithium Iron Phosphate Batteries