Abstract:Li2TiO3 precursor with layered structure is successfully prepared by template‐free method using anatase TiO2 and Li2CO3, followed by the treatment of dilute hydrochloric acid, which leads to obtaining H2TiO3 lithium ion sieve nanoparticles with uniform dispersion and small size. The adsorption performance and mechanism of the H2TiO3 are being studied. The experimental results show that the H2TiO3 lithium ion sieve has a large BET specific surface area (19.10 m2 g−1) and good thermal stability. At the same time, it also has a high adsorption rate and adsorption capacity (55.13 mg g−1) towards Li+ in solution due to its high dispersibility and uniformity of particle size, which can expose more adsorption sites in LiCl solution. The adsorption capacity of the H2TiO3 lithium ion sieve can reach 46.63 mg g−1, which achieves 84.58% of the equilibrium adsorption capacity. The equilibrium adsorption parameters follow the Langmuir model perfectly, demonstrating that Li+ undergoes monolayer adsorption. The results of thermodynamic and kinetic analysis show that the adsorption behavior of H2TiO3 is spontaneous and conforms to the pseudo‐second‐order kinetic model, indicating the adsorption process is controlled by chemosorption. In addition, after five adsorption/desorption cycles, the H2TiO3 lithium ion sieve still shows a high adsorption capacity of 46.15 mg g−1, and the dissolution loss of titanium is only 0.14%, which shows that the cycle stability is excellent. XPS and zeta potential analyses illustrate that the adsorption mechanism of Li+ on the H2TiO3 is an ion exchange reaction between Li+ and H+, combined with the electrostatic attraction of the adsorbent surface. Additionally, the adsorption performance of H2TiO3 lithium ion sieve in West Taijinaier Salt Lake brine was tested, and the adsorbent material proves itself is a perspective candidate for lithium extraction from aqueous lithium resources.

Application and limitations of a H2TiO3 – Diatomaceous earth composite synthesized from titania slag as a selective lithium adsorbent

Molecular Modification of a Novel Macroporous Silica-Based Impregnated Polymeric Composite by Tri-N-butyl Phosphate and Its Application in the Adsorption for Some Metals Contained in a Typical Simulated HLLW.

Adsorption Behavior of Sr(II) and Some Typical Co‐existent Metals Contained in High Level Liquid Waste Onto a Modified Macroporous Silica‐Based Polymeric DtBuCH18C6 Composite

Preparation of A Novel Silica-Based Dtbuch18c6 Impregnated Polymeric Composite Modified by Tri-N-Butyl Phosphate and Its Application in Chromatographic Partitioning of Strontium from High Level Liquid Waste

SPEC Process III. Synthesis of a Macroporous Silica-based Crown Ether-impregnated Polymeric Composite Modified with 1-Octanol and its Adsorption Capacity for Sr(II) Ions and Some Typical Co-existent Metal Ions

SPEC Process II. Adsorption of Strontium and Some Typical Co-Existent Elements Contained in High Level Liquid Waste Onto a Macroporous Silica-Based Crown Ether Impregnated Functional Composite

Preparation, Characterization, and Adsorption Performance of H2TiO3 Lithium Ion Sieves with Homogeneous Nanoparticles: Kinetics, Thermodynamics, and Mechanism Analysis

Enhanced lithium extraction from aqueous solutions using multi-scale modified titanium adsorbent

Adsorption of Lithium from Shale Gas Produced Water Using Titanium Based Adsorbent

Titanium-based lithium ion sieve adsorbent H2TiO3 with enhanced Li+ adsorption properties by magnetic Fe doping

Inorganic Porous Carbon As the Supporter of H2TiO3 Via In-Situ Polymerization Synchronous Conversion for Lithium Recovery from Aqueous Solutions

Insight into the synergistic mechanism of Co and N doped titanium-based adsorbents for liquid lithium extraction

Lithium ion sieve synthesized via an improved solid state method and adsorption performance for West Taijinar Salt Lake brine

A novel Co-doped H 2 TiO 3 spinning composite for efficient lithium recovery from alkaline lithium precipitation mother liquor

Highly hydrophilic H2TiO3 ion sieve with neodymium (Nd) doping enables fast and High-Efficiency Li extraction

Research Progress on New Types of H2TiO3 Lithium-Ion Sieves: A Review

Synthesis of High Specific Surface Lithium-Ion Sieve Templated by Bacterial Cellulose for Selective Adsorption of Li+

Synthesis of High Specific Surface Lithium ion Sieve Templated by Bacterial Cellulose for Selective Adsorption of Li+

Al-doped H 2 TiO 3 ion sieve with enhanced Li + adsorption performance

Hydrophilic surface-modified titanium-based lithium ion sieve adsorbents for efficient lithium extraction

Lithium extraction from geothermal brine by granulated HTO titanium-based adsorbent with block-co-polymer poly (ethylene-co-vinyl alcohol) (EVAL) as binder