Abstract:Herein, delamination within silicon/perovskite tandems, typically not observed on a laboratory scale, is observed when introducing ribbons, cell cutting, and lamination. In this work, the interfacial strength and fracture toughness of tandems are assessed. Delamination mitigation strategies demonstrated include improving buffer layer quality, reducing sputtering‐induced stress and damage, and selecting encapsulants, which minimize the thermomechanical stress imposed on the cells. As perovskite/silicon tandem solar cells head toward industrialization, one emerging challenge relates to the mechanical reliability of these organic–inorganic multilayer devices. Herein, the fracture toughness and interfacial strength of monolithic p–i–n perovskite/silicon tandems are assessed in the context of module integration. While the weakest layer in the tandem stack investigated is found to be C60, used here as electron‐transport layer (interfacial tensile strength of 0.64 MPa), more concerningly, the fracture energy of the C60/tin‐oxide interface is found to be only 1.2 J m−2. The low fracture toughness of perovskite/silicon tandems can encourage crack propagation and large‐scale delamination during processes used for their integration into modules such as cell cutting, interconnection, and vacuum lamination. By improving the tin oxide buffer layer properties and reducing sputtering‐induced internal stress (associated with the transparent top electrode deposition onto the tin the oxide buffer layer), the fracture energy is improved to over 160 J m−2. A second strategy to mitigate delamination due to the low fracture toughness of the cells is tailoring encapsulation and cell processing techniques specifically toward the perovskite/silicon tandem technology. In this work, a critical reliability issue, relevant for any perovskite‐based optoelectronic technology requiring device packaging, is addressed.

Mechanical damage of half-cell cutting technologies in solar cells and module laminates

Reliability study on the half-cutting PERC solar cell and module

Influence of laser condition on the electrical and mechanical performance of bifacial half‐cutting PERC solar cell and module

Sequential thermomechanical stress and cracking analysis of photovoltaic modules with full and half-cut cells

Thermo-mechanical stress modelling and fracture analysis on ultra-thin silicon solar cell based on super multi-busbar PV modules

Challenges and advantages of cut solar cells for shingling and half-cell modules

A Novel Laser Scribing Method Combined with the Thermal Stress Cleaving for the Crystalline Silicon Solar Cell Separation in Mass Production

Finite element model of femtosecond laser scribing on silicon heterojunction solar cells

Thermal laser separation and high-throughput layer deposition for edge passivation for TOPCon shingle solar cells

Optimization of front-contact laser scribing for thin-film silicon solar modules

Qualitative Damage Assessment of Laser Contact Opening and Microstructural Evolution at the Rear Contact of a Perc Mono Crystalline Si Solar Cell upon Co-Firing with Si Doped Al Paste

Silicon Heterojunction and Half-Cell configuration: optimization path for increased module power

Thermo-mechanical stress modeling and experimental investigation on micro-cracks in tilling ribbon photovoltaic modules during lamination and mechanical load test

Thermomechanical stress in solar cells: Contact pad modeling and reliability analysis

Electron Microscopy Characterisation of P3 Lines and Laser Scribing-induced Perovskite Decomposition in Perovskite Solar Modules.

Simulation and Experimental Analysis of Temperature Profiles and Crosslinking in PV Module Lamination

Post-Separation Processing for Silicon Heterojunction Half Solar Cells With Passivated Edges

Postmetallization “Passivated Edge Technology” for Separated Silicon Solar Cells

Strategies for minimizing induced thermomechanical stress in glass–glass PV modules with half cells identified using finite element modelling

Mitigating Delamination in Perovskite/Silicon Tandem Solar Modules

Improvement of Laser-Induced Damage on High-Efficiency Solar Cells via Top-Hat Beam Ablation