Abstract:Plasma nitriding is widely used in various industrial applications to improve surface hardness and wear properties. Especially for tool steels, it is also used to improve the support and adhesion of diamond-like carbon (DLC) coatings. The properties of the nitrided zone produced by plasma nitriding are influenced by the applied process parameter, in particular temperature and time. However, for high-alloy tool steels, a deeper understanding of the underlying diffusion processes of the nitrogen and the interaction with the existing microstructure, as well as the effects on the case depth is still lacking. Therefore, in this study, specimens of high-alloy tool steel X153CrMoV12 were plasma nitrided at varying temperatures (480 °C, 520 °C, 560 °C) and treatment times (2 h, 4 h, 16 h). The resulting nitrided zones were investigated by optical and scanning electron microscopy (OM and SEM), depth-dependent glow discharge optical emission spectroscopy (GDOES), X-ray diffraction (XRD), and hardness measurements to characterize their microstructure, chemical composition, and hardness depending on the process parameters. The distribution of carbides (M7C3), e.g., chromium carbides, affects the diffusion of the nitrogen and the layer growth. An increase of temperature and duration leads to an increased layer thickness. The composition of the compound layer is, e.g., influenced by the process parameters: ε nitrides (Fe2–3N) occurred preferentially at lower temperatures, while γ′ nitrides (Fe4N) appeared mostly at higher temperatures. In order to investigate the influence of the carbides of the high-alloy tool steel on the nitriding process, a new methodology was developed by means of finite element analysis (FE), which makes it possible to analyze this influence on the development of the nitrogen concentration profile. This methodology makes it possible for the first time to map the heterogeneous nitrogen evolution and distribution.

Low temperature plasma ion nitriding (PIN) of Inconel 690 alloy

Effect of Machine Pin-Manufacturing Process Parameters by Plasma Nitriding on Microstructure and Hardness of Working Surfaces

Effects of Nitrogen Addition on Microstructure and Grain Boundary Microchemistry of Inconel Alloy 690

Tribological Studies of Plasma Source Ion Nitrided Low Alloy Tool Steel

Erosion-Wear and Intergranular Corrosion Resistance Properties of Aisi 304l Austenitic Stainless Steel after Low-Temperature Plasma Nitriding

Plasma Nitriding of AISI 304 Stainless Steel in Cathodic and Floating Electric Potential: Influence on Morphology, Chemical Characteristics and Tribological Behavior

Low-temperature plasma nitriding at 500°C on surface-nanocrystalline Ti–4Al–2V alloy

Evolution of Microstructure and Hardness of the Nitrided Zone during Plasma Nitriding of High-Alloy Tool Steel

Nanosized precipitates in H13 tool steel low temperature plasma nitriding

Microstructures and Mechanical Performance of Plasma-Nitrided Al 0.3 CrFe 1.5 MnNi 0.5 High-Entropy Alloys

Evaluation of titanium nitride/titanium aluminum nitride thin film coating, plasma nitriding on AISI 304 stainless steel using the plasma-assisted physical vapor deposition process, and thermal stress investigated through finite-element analysis

Plasma nitriding in low pressure in an ECR microwave plasma

Laser assisted nitriding of nickel–chromium-based superalloy surface: Heating and diffusion analysis

Mechanical and Wear Properties of 42CrMo Steel by Plasma Nitriding assisted Hollow Cathode Ion Source

Dissolution and Precipitation of Carbide in Hot-Rolled Inconel Alloy 690

Nitrogen–carbon-induced Spinodal Structure in Plasma Nitrocarburized 38crmoal with Hollow Cathode Discharging

Structure and Wear Properties of NiTi Modified by Nitrogen Plasma Immersion Ion Implantation

An investigation on nitrogen uptake and microstructure of equimolar quaternary FeCoNiCr high entropy alloy after active-screen plasma nitriding

Research on the Carbide Precipitation and Chromium Depletion in the Grain Boundary of Alloy 690 Containing Different Contents of Nitrogen

Stress induced anisotropic diffusion during plasma-aided nitriding of a Ni-based superalloy

Stress Induced Anisotropic Diffusion During Plasma-Assisted Nitriding of A Ni-Based Alloy