Abstract:<p>Severe residual stresses generated by various preparative techniques can greatly affect the mechanical properties in the Ni-based superalloy parts. Limited data is currently available for deeply understanding the origin of residual stress at nanoscale, and in particular, for establishing the relationship between the residual stress and mechanical property to accelerate the development of the Ni-based superalloys. Here, the effect of the heat treatment on the grain growth, residual stress and flow stress in Ni-based superalloy is investigated by using an atomic simulation combined with a physically-based theoretical model. The dissociation of grain boundary causes the coalescence of adjacent grains during annealing, which is observed by atomic simulation. However, this process is different from the previous work that the curvature-driven grain-boundary migration leads to the grain growth. The residual stress consists of the grain and grain boundary, where the average value from grain boundary is about 50% higher that from the grain based on the statistical result. The grain growth and local movement of grain boundary cause the stress relaxation, and in turn they reduce the residual stress. The evolution of the residual stress is in good agreement with the previous experiment. Further, an analytical theoretical model is proposed to qualitatively evaluate the variation trend of the residual stress with the annealing temperature. It is also proved that the residual stress decreases with the increase of the annealing temperature. The present work can be applied to determine the residual stress in the annealed structure, which greatly reduces the process flow, therefore provides a scientific basis to turn the technological process for the accelerated development of the new Ni-based alloys.</p>

Stress Induced Anisotropic Diffusion During Plasma-Assisted Nitriding of A Ni-Based Alloy

Evolution of residual stress in the diffusion zone of a model Fe-Cr-C alloy during nitriding*

Thermal and Stress Impacts on Vacancy Diffusion Through Atomistic Simulations

Modeling of Oxygen Diffusion Along Grain Boundaries in a Nickel-Based Superalloy

Stress-assisted Atomic Diffusion in NiTiHf Shape Memory Alloys

Stress-induced influence on the evolution of γ′ phase in dendritic area during long-term stress aging at 900 °C in Ni-based superalloy K444

The Dependence of Stress and Strain Rate on the Deformation Behavior of a Ni‐based Single Crystal Superalloy at 1050°C

Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion

The effect of plastic deformation on hydrogen diffusion in nickel Alloy 625

Effect of recrystallization on diffusion in ultrafine grained Ni

A Study of the Internal Deformation Fields and the Related Microstructure Evolution during Thermal Fatigue Tests of a Single-Crystal Ni-Base Superalloy

Laser assisted nitriding of nickel–chromium-based superalloy surface: Heating and diffusion analysis

A Molecular Dynamics Study on the Dislocation-Precipitate Interaction in a Nickel Based Superalloy During the Tensile Deformation

The Effect of Ni Plating on the Residual Stress and Micro-Yield Strength in an Al-Cu-Mg Alloy Under Different Diffusion Treatments

Influences of stress-aging on the precipitation behavior of δ phase (Ni3Nb) in a nickel-based superalloy

On the Residual Stress Relaxation in Inconel 718 Superalloys at High Temperature by Real-Time Neutron Diffraction

An investigation on nitrogen uptake and microstructure of equimolar quaternary FeCoNiCr high entropy alloy after active-screen plasma nitriding

Evolution of residual stress and its impact on Ni-based superalloy

Orientation-Dependent Characteristics for Residual Grains During Hot Deformation of Nickel-Based Alloy 925

Anisotropy in microstructure and mechanical properties of additively manufactured Ni-based GH4099 alloy

Exploring mechanical properties and diffusion paths in Al–Co–Ni diffusion multiples fabricated through spark plasma sintering