Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. Shape memory alloys have made rapid progress in many domains, primarily biomedical (endovascular stents, orthodontic archwires), and engineering (smart actuators, robotics, hydraulic couplings). The selection of a shape memory alloy for the indented application is based on its characteristic phase transformation temperatures. These characteristic temperatures are influenced by myriad parameters, such as composition, microstructure of the alloy, defect density, etc. When an shape memory alloy under an external load is subjected to cyclic operations to perform useful work, for example, actuators, these characteristic temperatures are modified. This study, therefore, aims to understand the influence of external loading on the shape memory characteristics of a Ni50Ti45Cu5 (at.%) alloy. A wire of 1.43 mm diameter and length of 100 mm was subjected to heating and cooling between its phase transformation temperatures in a cyclic manner under constant stress (of up to 60 MPa). The maximum recovery strain, actuation/retraction rate, and the stress influence coefficient were determined and compared with those of the other Ni-Ti and Cu-based shape memory alloys. The results show that raising the load level causes an increase in the transition temperatures, especially the Ms (martensite start temperature) rather than the other phase transformation temperatures (martensite finish (Mf), austenite start (As), austenite finish (Af)). It also significantly affects the recovery strain and the rate of retraction during forward transformation and the symmetry of operation.

Stress-assisted Atomic Diffusion in NiTiHf Shape Memory Alloys

High Temperature Internal Friction in Ni50.3Ti29.7Zr20 Shape Memory Alloy

Precipitation and Coarsening Kinetics of H-phase in NiTiHf High Temperature Shape Memory Alloy

In-Situ High-Energy Synchrotron X-Ray Diffraction Study of Micromechanical Behavior of Multiple Phases in Ni47ti44nb9 Shape Memory Alloy

Ultra-high temperature shape memory in high-Hf content NiTiHf alloys

Microstructure Analysis and Thermal Characteristics of NiTiHf Shape Memory Alloy with Different Composition

Martensitic transformations and kinetics in Ti-Ni-Cu-Hf shape memory alloy

Insitu Neutron Diffraction Study of Micromechanical Interaction and Phase Transformation in Dual Phase Niti Alloy During Tensile Loading

In-situ Synchrotron X-ray Diffraction Analysis of the Elastic Behaviour of Martensite and H-phase in a NiTiHf High Temperature Shape Memory Alloy Fabricated by Laser Powder Bed Fusion

Study on Properties of Stress Relaxation for NiTiNb Shape Memory Alloy

Effects of cooling rate on martensitic transformation behavior and shape memory property for Ni-rich NiTiHf-Nb high-temperature shape memory alloy

The Effect of Hafnium Content on the Transformation Temperatures of Ni49Ti51-xHfx. Shape Memory Alloys

The Role of H-phase in Thermal Hysteresis and Shape Memory Properties in Ni50Ti30Hf20alloy

Influence of applied stress on shape memory characteristics of Ni50Ti45Cu5 (at.%) alloy subjected to thermomechanical cycling

Ab initio study of point defects in NiTi-based alloys

In-situ TOF Neutron Diffraction Studies of Cyclic Softening in Superelasticity of a NiFeGaCo Shape Memory Alloy

Deformation Dependence of Transformation Behavior of Ti-Ni-Nb Wide Hysteresis Shape Memory Alloy

Shape memory effect of the Ni-Ti-Hf high temperature shape memory alloy

Effect of Stoichiometry on Shape Memory Properties of Ti-Ni-Hf-Cu-Nb Shape Memory Alloys Manufactured by Suspended Droplet Alloying

Stress Induced Anisotropic Diffusion During Plasma-Assisted Nitriding of A Ni-Based Alloy

Rate dependent damping of single crystal CuAlNi shape memory alloy