Abstract:We present a detailed analysis based on both experimental and 3D modelling approaches of the unique silicon nitride precipitation sequence observed in ferritic Fe-Si alloys upon nitriding. At 570 °C, Si3N4 silicon nitride was shown to form as an amorphous phase into α-Fe ferrite matrix, which is morphologically unstable over time. Precipitates nucleated with a spheroidal shape, then developed a cuboidal shape for intermediate sizes and octapod-like morphology for a longer time. Using transmission electron microscopy, we show that the transition between spheroid and cuboid morphology depended on particle size and resulted from competition between interfacial energy and elastic strain energy. The resulting morphology was then shown to be a cuboid shape whose faces were always parallel to the {100} planes of the α-Fe; the directions of the matrix corresponded to the elastically soft directions. There was a critical size of around 45 nm for which the transition between the cuboid shape and the octapod-like morphology took place. This was characterised by a transformation of quasi-flat facets into concave ones and the development of lobes in the directions of the bcc crystal. To better assess the kinetic effects of diffusion fields and internal stresses on the morphological instability observed, an original 3D model that explicitly coupled phase transformations and mechanical fields was developed and applied. The latter, validated on the basis of model cases, was shown to be able to describe the time-evolution of both chemical and mechanical fields and their interactions in diffusive mass transport. Using a model system, it was shown that the concentration field around the precipitates and the internal stresses played opposing roles in the cuboid to octapod-like morphological instability. This work gives some clarification regarding the morphological evolution of amorphous Si3N4 precipitates, an important point for controlling the mechanical properties of nitrogen steels.

Evolution of residual stress in the diffusion zone of a model Fe-Cr-C alloy during nitriding*

Effect of Crystallographic Orientation on Quenching Stress During Martensitic Phase Transformation of Carbon Steel Plate

X-ray Residual Stress Analysis of Nitrided Low Alloyed Steels

Morphological and Dimensional Evolution of Nanosized Amorphous Silicon Nitride in α-Fe: Diffusional and Elastic Effects

Bainite Formation in a Carbon-Free Fe–Cr–N System

Evolution of residual stress and its impact on Ni-based superalloy

Thermodynamic Studies of the Fe-Cr-C-N System by Emf Measurements

On the Residual Stress Relaxation in Inconel 718 Superalloys at High Temperature by Real-Time Neutron Diffraction

Experimental study on the evolution law of residual stress in the fatigue process of inductively quenched 42CrMo steel

An investigation on nitrogen uptake and microstructure of equimolar quaternary FeCoNiCr high entropy alloy after active-screen plasma nitriding

Modeling of Oxygen Diffusion Along Grain Boundaries in a Nickel-Based Superalloy

Gaseous carbonitriding of high carbon chromium bearing steel: Correlation between composition, microstructure and stability

Measuring Depth-Dependent Residual Stresses in Gaseous Nitrided Steels Using Indentation Method

Influence of Nitrogen Content and Bias Voltage on Residual Stress and the Tribological and Mechanical Properties of CrAlN Films

In situ study of non-equilibrium solidification of CoCrFeNi high-entropy alloy and CrFeNi and CoCrNi ternary suballoys

Nitrogen Effects in Additively Manufactured Martensitic Stainless Steels: Conventional Thermal Processing and Comparison with Wrought

Investigation of thermal phase evolution in Cr 2 (C,N) inhibitor for optimizing high-performance cemented carbide sintering process

The Fe-N system: crystal structure prediction, phase stability, and mechanical properties

Nitriding layer characteristics of modified AISI422 martensitic stainless steel in tempered state

A diffusion-based approach for modelling crack tip behaviour under fatigue-oxidation conditions

Stabilization of mechanical strength in a nanocrystalline CoCrNi concentrated alloy by nitrogen alloying