Abstract:The influence of the synthesis method parameters used to prepare nickel-based catalysts on the catalytic performance for the glycerol steam reforming reaction was studied. A series of Al2O3-supported Ni catalysts were synthesized, with nickel loading of 8 wt%, using the incipient wetness, wet impregnation, and modified equilibrium deposition filtration methods. The catalysts' surface and bulk properties were determined by inductively coupled plasma (ICP), N2 adsorption-desorption isotherms (BET), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and temperature-programmed reduction (TPR). Used catalysts were characterized by techniques such as elemental analysis and SEM in order to determine the level of carbon that was deposited and catalyst morphology. The results indicated that the synthesis method affected the textural, structural and surface properties of the catalysts, differentiating the dispersion and the kind of nickel species on alumina's surface. The formation of nickel aluminate phases was confirmed by the XRD and TPR analysis and the β-peak of the Ni/Al-edf catalyst was higher than in the other two catalysts, indicating that the nickel aluminate species of this catalyst were more reducible. Both Ni/Al-wet and Ni/Al-edf catalysts showed increasing CO2 selectivities and approximately constant CO selectivities for temperatures above 550 °C, indicating that these catalysts successfully catalyze the water gas shift reaction. It was also confirmed that the Ni/Al-edf catalyst had the highest values for glycerol to gaseous products conversion, hydrogen yield, allyl alcohol, acetaldehyde, and acetic acid selectivities at 650 °C and the lowest carbon deposition of the catalysts tested. The correlation of the catalysts' structural properties, dispersion and reducibility with catalytic performance reveals that the EDF method can provide catalysts with higher specific surface area and active phase's dispersion, that are easier to reduce, more active and selective to hydrogen production, and more resistant to carbon deposition.

Kinetics of ethanol steam reforming over Ni/Olivine catalyst

Ni-hydrocalumite Derived Catalysts for Ethanol Steam Reforming on Hydrogen Production

Steam reforming of ethanol over Ni/MgAl2O4 catalysts

From Steam Reforming of Ethanol at Low Temperature over , and Catalysts for Fuel-Cell Application

Steam reforming of ethanol for hydrogen production: influence of catalyst composition (Ni/Al2O3, Ni/Al2O3–CeO2, Ni/Al2O3–ZnO) and process conditions

Hydrogen Production from Ethanol Steam Reforming over Ni/Al2O3 and Ni/La2O3 Catalysts at Low Temperature

Experimental and Subsequent Mechanism Research on the Steam Reforming of Ethanol over A Ni/Ceo2 Catalyst

Influence of the synthesis method parameters used to prepare nickel-based catalysts on the catalytic performance for the glycerol steam reforming reaction

Influence of Preparation Conditions of Ni/Al_2O_3 Catalyst on Its Activity in ydrogen Production by Ethanol Steam Reforming

Steam reforming of ethanol for hydrogen production over NiO/ZnO/ZrO2 catalysts

Improving Coking Resistance and Catalytic Performance of Ni Catalyst from LaNiO3 Perovskite by Dispersion on SBA-15 Mesoporous Silica for Hydrogen Production by Steam Reforming of Ethanol

Studies on Ni/Al2O3 Catalyst for Hydrogen Production from Ethanol Steam Reforming

Role of Fe Species of Ni-Based Catalysts for Efficient Low-Temperature Ethanol Steam Reforming

Catalytic Steam Reforming of Ethanol for Hydrogen Production over Ni/Ceo2-Zro2 Catalysts

Glycerol Steam Reforming for Hydrogen Production over Nickel Supported on Alumina, Zirconia and Silica Catalysts

Preparation and characterization of high-performance Ni-based core–shell catalyst for ethanol steam reforming

Hydrogen production by ethanol steam reforming over Ni–Co–Al mixed oxides derived from LDH

Pursuing Complete and Stable Steam Reforming of N-Dodecane over Nickel Catalysts at Low Temperature and High LHSV

Hydrogen Production by Steam Reforming of Ethanol and Dry Reforming of Methane with CO2 on Ni/Vermiculite: Stability Improvement via Acid or Base Treatment of the Support

Steam reforming of ethanol with zirconia incorporated mesoporous silicate supported catalysts

A Comparative Study of Catalytic Behaviors of Mn, Fe, Co, Ni, Cu and Zn–Based Catalysts in Steam Reforming of Methanol, Acetic Acid and Acetone