Abstract:Foam flooding in fractured tight oil reservoirs can enhance gas mobility and conformance control by diverting gas flow from high-permeability zones (fractures) to low-permeability ones (matrices). Several factors, including operating conditions, foam generation parameters, fluid injection schemes, and properties of injected and resident fluids, affect the fracture–matrix interactions. However, thus far, the literature provides a limited understanding of the effects of such factors on the fluid displacement mechanisms between matrices and fractures in propped fractured rocks under reservoir conditions. In this study, two different methane foam injection schemes were investigated for their impact on foamability and oil recovery from propped fractured oil-wet carbonate cores at 115 °C and 3500 psi: (1) foam-alternating-gas injection (FAGI-D) and (2) foam-alternating-wet gas-alternating-gas injection (FAGI-W-D). The aqueous solutions consisted of high-salinity brine containing two foaming agents: surfactant A (anionic) and surfactant B (amphoteric). The macro-scale foam flooding tests showed that the performance of foam in oil-wet porous media was significantly influenced by the number of cycles, foam slug size, total injection rate, and gas fraction. Surfactants A and B exhibited different foaming behaviors irrespective of the foam injection scheme at a fixed concentration (4000 ppm) and foam quality (85%). For surfactant A, a large foam slug size (i.e., six pore volumes) and a high injection rate were necessary to generate foam. In contrast, a lower slug size (i.e., three pore volumes) and a lower injection rate were sufficient for surfactant B. The latter also showed better tolerance toward oil and produced foam of good strength in oil-wet porous media. Therefore, the foam generated by surfactant B significantly reduced the gas mobility and enhanced the fluid displacement from the matrix, leading to higher oil recovery (20.61%) compared with its counterpart (12.96%). Interestingly, the performance of both surfactants was improved at a lower foam quality of 70% and resulted in better foamability, stability, and oil production from tight matrices. This behavior can be attributed to the high water content in the foam, which depleted the oil saturation inside the porous medium more efficiently, leading to increased foamability and higher foam stability. The results also demonstrated that a higher total injection rate of 3 cc/min supported the generation of gas bubbles and caused significant fracture–matrix interactions, diverting more gas from the fracture to the rock matrix.

Laboratory evaluation and numerical simulation study on profile modification performance of gel-nitrogen-foam for low permeability formation under fracturing

Study of Displacement Efficiency and Flow Behavior of Foamed Gel in Non-Homogeneous Porous Media

Experimental Study on the Optimization of Multi-level Nano-Microsphere Deep Profile Control in the Process of Gas Injection in Fracture-Type Buried-Hill Reservoirs

Laboratory Experimental Optimization of Gel Flooding Parameters to Enhance Oil Recovery during Field Applications

N 2 Foam Flooding Combined with Gel Plugging for Enhanced Oil Recovery in High-Temperature Reservoirs: Laboratory Experiments and Numerical Simulations

Experimental Research on the Optimization and Evaluation of the Polymer/Chromium-Ion Deep Profile Control System for the Fractured Low-Permeability Reservoirs

Study on the Mechanism of Nanoemulsion Removal of Water Locking Damage and Compatibility of Working Fluids in Tight Sandstone Reservoirs

Experimental quantification of formation damage caused by the cross-linked gel in tight gas reservoirs

Effects of Matrix Permeability and Fracture on Production Characteristics and Residual Oil Distribution During Flue Gas Flooding in Low Permeability/tight Reservoirs

Study on small molecule gel fracturing fluid and its in-situ convertion into efficient oil displacement agent

Experimental Evaluation of the Rheological Properties and Influencing Factors of Gel Fracturing Fluid Mixed with CO2 for Shale Gas Reservoir Stimulation

Optimization of Fracturing Fluid and Retarded Acid for Stimulating Tight Naturally Fractured Bedrock Reservoirs.

Identification of Gas Channeling and Construction of a Gel-Enhanced Foam Plugging System for Oxygen-Reduced Air Flooding in the Changqing Oilfield

The study of an inorganic gel for profile modification in high-temperature and low-permeability sandstone reservoirs

A new type of high density fracturing fluid system

Cause analysis and solutions of water blocking damage in cracked/non-cracked tight sandstone gas reservoirs

Study on Green Nanofluid Profile Control and Displacement of Oil in a Low Permeability Reservoir

Study on Formation and Migration Law of Foam in Fractures and Its Influencing Factors

Experimental Evaluation of Foam-Assisted Gas Injection in Proppant-Packed Fractured Oil-Wet Carbonate

Study on fracturing fluid return pattern and production characteristics of shale gas wells

Gas channeling control with CO 2 -responsive gel system in fractured low-permeability reservoirs: Enhancing oil recovery during CO 2 flooding