Abstract:Dynamic imbibition and displacement between the matrix and fractures in shale reservoirs can significantly enhance oil recovery (EOR) following initial depletion. However, the microscopic production characteristics and seepage mechanisms at different pore scales during the dynamic imbibition process remain incompletely understood. In this study, we established an online physical simulation experiment method that combines dynamic displacement and imbibition based on nuclear magnetic resonance (NMR) and fractal theory, and a series of online NMR water flooding dynamic imbibition experiments were conducted. Through real-time dynamic monitoring of multiphase flow and migration behavior of crude oil in each stage of dynamic imbibition, the microscopic production characteristics and influencing factors were quantitatively studied from the recovery and residual oil saturation field distribution of different scale pores. Additionally, we developed a novel two-dimensional (2-D) NMR interpretation model to investigate the dynamic development characteristics of shale oil injection-imbibition-soaking-production integration, and the multiphase and multi-scale dynamic imbibition crude oil migration models were discussed. The results show that shale oil occurrence pores can be categorized into two types based on the corresponding production mode (imbibition + displacement). The water flooding dynamic imbibition process in shale reservoirs unfolds in three stages: strong displacement and weak imbibition stage characterized by the rapid production of large pores and fractures under displacement action; weak displacement and strong imbibition stage involving the slow production of small pores under reverse imbibition; and dynamic equilibrium stage characterized by weak displacement and weak imbibition. When viewing the entire water flooding dynamic imbibition process as an organism, it becomes imperative to maximize the recovery of large pores while ensuring the recovery degree of small pores. High permeability contributes to better pore throat connectivity and a greater imbibition and displacement production degree. The contribution of the.two production modes to the recovery of small and large pores increased by 4.67 % and 3.17 %, respectively. A negative correlation was observed between high displacement pressure and imbibition recovery, yet it is conducive to the contribution of displacement to total recovery. Notably, fractures can effectively reduce oil-water seepage resistance, and increase the contribution of displacement to recovery by 21.65 %. Finally.a positive correlation was noted between increased imbibition amount and free oil recovery, while residual oil gradually shifted towards adsorbed and organic matter-dominated forms, leading to decreased recoverability. Effectively utilizing the bridge flow conductivity of fractures, fluid imbibition displacement, and carrying effect is crucial for achieving optimal EOR. The findings provide theoretical support for clarifying the interaction between matrix-fracture imbibition and displacement and for the efficient development of shale oil.

Effects of Matrix Permeability and Fracture on Production Characteristics and Residual Oil Distribution During Flue Gas Flooding in Low Permeability/tight Reservoirs

Quantitative Investigation on Natural Gas Flooding Characteristics in Tight Oil Cores after Fracturing Based on Nuclear Magnetic Resonance Technique

Influence of Heterogeneity and Fracture Conductivity on Supercritical CO 2 Miscible Flooding Enhancing Oil Recovery and Gas Channeling in Tight Oil Reservoirs

Experimental study on water flooding mechanism in low permeability oil reservoirs based on nuclear magnetic resonance technology

Laboratory evaluation and numerical simulation study on profile modification performance of gel-nitrogen-foam for low permeability formation under fracturing

Numerical simulation of fractured vertical well in low-permeable oil reservoir with proppant distribution in hydraulic fracture

Experiment of dynamic seepage of tight/shale oil under matrix fracture coupling

Flow Characterization in Fractured Shale Oil Matrices Using Advanced Nuclear Magnetic Resonance Techniques

Experimental study on microscopic production characteristics and influencing factors during dynamic imbibition of shale reservoir with online NMR and fractal theory

Experimental Study on the Effects of Pore Pressure and Slippage on the Permeability of a Fracture Network during Depressurization of Shale Gas Reservoir Production

Experimental study on stress-dependent multiphase flow in ultra-low permeability sandstone during CO2 flooding based on LF-NMR

Investigating the Influencing Factors of Imbibition of Fracturing Fluids in Tight Reservoirs

Investigation on the microscopic damage mechanism of fracturing fluids to low-permeability sandstone oil reservoir by nuclear magnetic resonance

Distribution Characteristics and Backflow Flow Pattern of a Slickwater Fracturing Fluid in Shale Based on Low-Field Nuclear Magnetic Resonance

Experimental investigation of CO 2 huff- n -puff in tight oil reservoirs: Effects of the fracture on the dynamic transport characteristics based on the nuclear magnetic resonance and fractal theory

Production Dynamic Characteristic of Fractured Wells in Multilayer Reservoirs Considering the Effect of Non-Uniform Flux Distribution

Using digital cores and nuclear magnetic resonance to study pore-fracture structure and fluid mobility in tight volcanic rock reservoirs

Long-term effect of desorption-induced matrix shrinkage on the evolution of coal permeability during coalbed methane production

Fractal hydrological-thermal–mechanical analysis of unconventional reservoir: A fracture-matrix structure model for gas extraction

Study on the Flow Behavior of Gas and Water in Fractured Tight Gas Reservoirs Considering Matrix Imbibition Using the Digital Core Method

Investigation of the Effect of Fracturing Fluids on Shale Pore Structure by Nuclear Magnetic Resonance