Abstract:Summary CO2 huff ‘n’ puff is a promising enhanced oil recovery (EOR) technique for tight/shale reservoirs, also enabling CO2 geological storage. However, the effectiveness of this method can be significantly affected by the aqueous phase resulting from connate water and hydraulic fracturing. The mechanism underlying the influence of the aqueous phase on oil recovery during CO2 huff ‘n’ puff, as well as the corresponding stimulation methods in such scenarios, remain unclear and warrant further study. To investigate this, we utilized a nuclear magnetic resonance (NMR) instrument to track the movement of fluids during CO2 huff ‘n’ puff under water invasion conditions. The impact of the invaded aqueous phase on oil recovery was examined, and the impact of different treatment parameters was explored. The results show that the aqueous barrier formed by water invasion alters the pathway of CO2 diffusion to matrix oil. This alteration leads to a diminished concentration of CO2 in the oil phase, which, in turn, results in a substantial reduction in oil recovery. Consequently, the performance of CO2 huff ‘n’ puff is highly sensitive to the water phase. Nevertheless, the oil recovery dynamics in cyclic CO2 huff ‘n’ puff under water invasion exhibit distinctive patterns compared with those without water invasion. These differences manifest as notable low oil recovery in the first cycle, followed by a rapid increase in the second cycle. This behavior primarily arises from the expulsion of a significant portion of the invaded water from the macropores after the first cycle. However, the effectiveness of this mechanism is limited in micropores due to the challenging displacement of trapped water in such pores. Raising the injection pressure mainly boosts oil recovery in macropores, with minimal response in micropores. Yet, the achievement of miscibility does not lead to a substantial improvement in the CO2 huff ‘n’ puff performance, primarily due to the constraints imposed by the limited CO2 dissolution through molecular diffusion Additionally, we have proposed three stimulation mechanisms achieved by lengthening the soaking time under water invasion conditions. First, the prolonged soaking time increases the concentration of CO2 molecules that diffuse into the matrix oil. Second, it promotes the imbibition of the trapped water on the fracture surface into the deeper matrix to alleviate water blockage. Finally, the invaded water in macropores displaces oil in micropores by capillary force during the soaking period.

Experimental investigation of CO 2 huff- n -puff in tight oil reservoirs: Effects of the fracture on the dynamic transport characteristics based on the nuclear magnetic resonance and fractal theory

Visualized investigation of transport and phase behaviors during CO<sub>2</sub> huff-n-puff in nanomatrix-fracture tight formations

Exploring pore-scale production characteristics of oil shale after CO2 huff 'n' puff in fractured shale with varied permeability

Experimental study of enhanced oil recovery by CO2 huff-n-puff in shales and tight sandstones with fractures

Study on the Mechanism of Carbon Dioxide Miscible Fracturing Fluid Huff and Puff in Enhanced Oil Recovery

Quantitative study of CO2 huff-n-puff enhanced oil recovery in tight formation using online NMR technology

Experimental study of CO2 huff-n-puff in a tight conglomerate reservoir using true triaxial stress cell core fracturing and displacement system: A case study

Investigating the Impact of Aqueous Phase on CO2 Huff ‘n’ Puff in Tight Oil Reservoirs Using Nuclear Magnetic Resonance Technology: Stimulation Measures and Mechanisms

Compositional Simulation of CO2 Huff-n-Puff Processes in Tight Oil Reservoirs with Complex Fractures Based on EDFM Technology Considering the Threshold Pressure Gradient

Experimental Investigation on Cyclic Huff-n-Puff with Surfactants Based on Complex Fracture Networks in Water-Wet Oil Reservoirs with Extralow Permeability

Quantitative Evaluation of Shale-Oil Recovery during CO 2 Huff-n-Puff at Different Pore Scales

Microscopic Production Characteristics of Huff-n-Puff after CO 2 Flooding in Tight Oil Sandstone Reservoirs

Oil recovery and compositional change of CO2 huff-n-puff and continuous injection modes in a variety of dual-permeability tight matrix-fracture models

Microscopic Production Characteristics of Crude Oil in Nanopores of Shale Oil Reservoirs During CO 2 Huff and Puff

Micro-action mechanism and macro-prediction analysis in the process of CO2 huff-n-puff in ultra-heavy oil reservoirs

CO2 Waterless Fracturing and Huff and Puff in Tight Oil Reservoir

A Microfluidic Experiment on CO2 Injection for Enhanced Oil Recovery in a Shale Oil Reservoir with High Temperature and Pressure

Characteristics of Crude Oil Production in Microscopic Pores of CO 2 Huff and Puff in Shale Oil Reservoirs

Re-Fracturing vs. CO2 Huff-n-Puff Injection in a Tight Shale Reservoir for Enhancing Gas Production

Experimental study on influencing factors of CO2 huff and puff effect in the tight water-bearing reservoir

Study on Oil Composition Variation and Its Influencing Factors during CO2 Huff-n-Puff in Tight Oil Reservoirs