Abstract:Abstract After hydraulic fracturing treatment, a reduction in permeability caused by the invasion of fracturing fluids is an inevitable problem, which is called water blocking damage. Therefore, it is important to mitigate and eliminate water blocking damage to improve the flow capacities of formation fluids and flowback rates of the fracturing fluid. However, the steady-state core flow method cannot quickly and accurately evaluate the effects of chemical agents in enhancing the fluid flow capacities in tight reservoirs. This paper introduces a time-saving and accurate method, pressure transmission test (PTT), which can quickly and quantitatively evaluate the liquid flow capacities and gas-drive flowback rates of a new nanoemulsion. Furthermore, scanning electron microscopy (SEM) was used to analyze the damage mechanism of different fluids and the adsorption of chemical agents on the rock surface. Parallel core flow experiments were used to evaluate the effects of the nanoemulsion on enhancing flowback rates in heterogeneous tight reservoirs. Experimental results show that the water blocking damage mechanisms differ in matrices and fractures. The main channels for gas channeling are fractures in cracked cores and pores in non-cracked cores. Cracked cores suffer less damage from water blocking than non-cracked cores, but have a lower potential to reduce water saturation. The PTT and SEM results show that the permeability reduction in tight sandstones caused by invasion of external fluids can be list as guar gum fracturing fluid > slickwater > brine. Parallel core flow experiments show that for low-permeability heterogenous sandstone reservoirs with a certain permeability ratio, the nanoemulsion can not only reduce reverse gas channeling degree, but also increase the flowback rate of the fracturing fluid. The nanoemulsion system provides a new solution to mitigate and eliminate water blocking damage caused by fracturing fluids in tight sandstone gas reservoirs.

What problem does this paper attempt to address?

This paper attempts to address the issue of permeability reduction (water lock damage) caused by fracturing fluid invasion after fracturing treatment. Specifically, the study aims to mitigate and eliminate water lock damage to improve the flow capacity of formation fluids and the flowback rate of fracturing fluids. Traditional steady-state core flow methods cannot quickly and accurately evaluate the role of chemicals in enhancing the flow capacity of fluids in tight reservoirs. Therefore, this paper introduces a time-saving and accurate method—Pressure Transmission Test (PTT)—for quickly and quantitatively evaluating the liquid flow capacity and gas-driven flowback rate of novel nanoemulsions. Additionally, the damage mechanisms of different fluids and the adsorption of chemicals on the rock surface were analyzed through Scanning Electron Microscopy (SEM), and the effectiveness of nanoemulsions in improving the flowback rate in heterogeneous tight reservoirs was evaluated through parallel core flow experiments. ### Main Issues: 1. **Water Lock Damage**: After fracturing treatment, the invasion of fracturing fluid leads to a decrease in permeability, affecting gas well production. 2. **Limitations of Evaluation Methods**: Traditional steady-state core flow methods cannot quickly and accurately evaluate the role of chemicals in enhancing the flow capacity of fluids in tight reservoirs. 3. **Gas Channeling in Heterogeneous Reservoirs**: Gas channeling in heterogeneous reservoirs leads to the presence of water in some areas, affecting gas well production. ### Solutions: 1. **Pressure Transmission Test (PTT)**: A method for quickly and accurately evaluating liquid flow capacity and gas-driven flowback rate. 2. **Nanoemulsions**: By reducing gas-liquid interfacial tension and altering rock wettability, they reduce water lock damage and improve liquid flow capacity and flowback rate. 3. **Experimental Verification**: The effectiveness of nanoemulsions was verified through SEM analysis, parallel core flow experiments, and other methods. ### Research Background: - **Increasing Global Energy Demand**: Unconventional natural gas resources play an increasingly important role in current energy supply. - **Low Natural Productivity**: Single well natural productivity is low, requiring horizontal drilling and fracturing technology to increase production. - **Water Lock Damage**: Fracturing fluid cannot be immediately flowed back, with a large amount remaining in the formation, leading to a decrease in permeability and significantly reducing gas well production. ### Research Methods: - **Core Preparation**: Prepare different types of core samples, including low permeability core samples, fractured core samples, parallel core samples, etc. - **Experimental Fluids**: Simulate formation brine, nanoemulsions, slickwater fracturing fluid, guar gum fracturing fluid, etc. - **Experimental Methods**: Water lock damage evaluation, nanoemulsion characterization, pressure transmission test, parallel core flow test, etc. ### Experimental Results: - **Water Lock Damage**: In non-fractured core samples, gas phase permeability significantly decreases as water saturation increases; in fractured core samples, gas phase permeability damage rate is lower when water saturation is below 50%. - **Nanoemulsion Characteristics**: Nanoemulsions can effectively reduce gas-liquid interfacial tension and alter rock wettability, with an optimal concentration of 0.30 wt%. - **PTT Results**: Nanoemulsions can significantly improve liquid flow capacity, with liquid flow capacity in non-fractured core samples increasing by 118.55% and in fractured core samples by 54.28%. ### Conclusion: - **Nanoemulsions**: Provide a new solution that can effectively mitigate and eliminate water lock damage caused by fracturing fluids, improving gas well production in tight sandstone gas reservoirs. - **PTT Method**: Quickly and accurately evaluates the effectiveness of nanoemulsions in enhancing the flow capacity of fluids in tight reservoirs.

Cause analysis and solutions of water blocking damage in cracked/non-cracked tight sandstone gas reservoirs

Study on the Mechanism of Nanoemulsion Removal of Water Locking Damage and Compatibility of Working Fluids in Tight Sandstone Reservoirs

Study on the Mechanism of Water Blocking in Tight Sandstone Gas Reservoirs Based on Centrifugal and Nuclear Magnetic Resonance Methods

Water Blocking Damage Evaluation and Mitigation Method in Tight Gas Reservoirs

Investigation on the microscopic damage mechanism of fracturing fluids to low-permeability sandstone oil reservoir by nuclear magnetic resonance

Investigation of Water-Sensitivity Damage for Tight Low-Permeability Sandstone Reservoirs

Study on the Imbibition Damage Mechanisms of Fracturing Fluid for the Whole Fracturing Process in a Tight Sandstone Gas Reservoir

Study on the Flow Behavior of Gas and Water in Fractured Tight Gas Reservoirs Considering Matrix Imbibition Using the Digital Core Method

Research on water blocking and residue damage mechanism of fracturing fluid in Yongjin tight reservoirs

The flooding mechanism and oil recovery of nanoemulsion on the fractured/non-fractured tight sandstone based on online LF-NMR experiments

Study on the Cleanup Mechanism of Microemulsion Acid Based on Microfluidic Experiment

Quantitative Investigation of Water Sensitivity and Water Locking Damages on a Low-Permeability Reservoir Using the Core Flooding Experiment and NMR Test

Study on Matrix Damage and Control Methods of Fracturing Fluid on Tight Sandstone Gas Reservoirs

Influence of reservoir physical properties on guar gum fracturing fluid damage in unconventional tight reservoirs

Wettability alteration and mitigating aqueous phase trapping damage in tight gas sandstone reservoirs using mixed cationic surfactant/nonionic fluoro-surfactant solution

Experimental quantification of formation damage caused by the cross-linked gel in tight gas reservoirs

Experimental Evaluation of Blockage Resistance and Position Caused by Microparticle Migration in Water Injection Wells

Chemical Proppant Generated in the Fracture from the Novel Fracturing Fluid System

Effect of temporary plugging agent concentration and fracturing fluid infiltration on initiation and propagation of hydraulic fractures in analogue tight sandstones

Evaluation of the Percolation Sensitivity of Loose Sandstone Using Digital Core Technology