Abstract:Abstract CO2 injection is regarded as an important method for enhanced oil recovery (EOR) and greenhouse gas control by storing CO2 underground. However, the reservoir heterogeneity and low viscosity of CO2 will result in poor sweep and therefore inadequate oil recovery and inefficient gas storage. The entanglement of biopolymers is a well-known phenomenon that, when controlled, can result in a smart fluid with strong gelation properties. We have shown that when a suitable salt is incorporated into the cellulose nanocrystal (CNC), the fluids undergo gelation upon contact with bulk phase CO2 but remain a flowing liquid otherwise. In this study, we applied this composition-selective trigger to improve the sweep efficiency in CO2 EOR and sequestration. Benchtop tests were performed to observe the gelation time and strength of gel to optimize the chemical concentrations accordingly. Parameters such as CNC and salt concentrations were optimized to tune the gelation time and gel strength. The optimized CNC fluid was tested for its ability to turn to gel within the porous medium as CO2 encounters the fluid. Flow tests were performed in a representative model porous media to analyze the in-situ gelation inferred from pressure profile and fluid production. CO2 and N2 gas were used as the gas phases. A heterogeneous dual-sandpack was used to demonstrate sweep efficiency improvement during CO2 injection. Tuning the chemical concentration enabled us to optimize the gel strength and more importantly gelation time across a wide range, from 5 minutes to more than 48 hours. The gel can be easily broken in contact with nitrogen gas. After CNC+salt fluid was placed in porous media initially containing water and CO2, subsequent injection of CO2 required a very large pressure gradient to initiate flow demonstrating the in-situ generations of gel. Once the flow was initiated, subsequent sequential injections of CO2 and N2 exhibited smaller resistance to N2 than to CO2, consistent with the reversible gel/solution transition in the presence/absence of CO2 observed in batch experiments. Flow tests in heterogeneous dual-sandpack (with permeability contrast of 5) revealed that in-situ gelation diverts injected CO2 almost entirely to the lower permeability layer, which had been almost completely bypassed during injection prior to the CNC+salt injection. The composition-specific trigger, the ability to control the fluid's properties, and the renewable source of nanomaterials will open up an enormous opportunity for CO2 injection processes in heterogeneous reservoirs, in challenging locations (i.e. offshore) and in related applications such as CO2 sequestration.

Gas channeling control with CO 2 -responsive gel system in fractured low-permeability reservoirs: Enhancing oil recovery during CO 2 flooding

Preparation and Effect of CO2 Response Gel for Plugging Low-Permeability Reservoirs

CO2-triggered gelation for mobility control and channeling blocking during CO2 flooding processes

A novel dual-network CO 2 -responsive particle gel for mitigating CO 2 channeling and leakage in hydrocarbon recovery and carbon storage

Conformance control by a microgel in a multi-layered heterogeneous reservoir during CO2 enhanced oil recovery process

Rheological properties and gas channeling plugging ability in CO2 flooding of a hydrophobic nanoparticle-enhanced smart gel system constructed with wormlike micelles

Experimental Evaluation of Combined Plugging System for CO 2 -Improved Oil Recovery and Storage

CO2-responsive preformed gel particles with interpenetrating networks for controlling CO2 breakthrough in tight reservoirs

Pore-scale characterization of carbon dioxide storage at immiscible and near-miscible conditions in altered-wettability reservoir rocks

Application of a Multistage Plugging System in a Fractured Reservoir of CO 2 Flooding

Thermo-/pH-Dual-Sensitive PEG/PAMAM Nanogel: Reaction Dynamics and Plugging Application of CO2 Channeling

Experimental Study on the Feasibility of Supercritical CO2-gel Fracturing for Stimulating Shale Oil Reservoirs

Performance and applicable limits of multi-stage gas channeling control system for CO2 flooding in ultra-low permeability reservoirs

Investigation of In Situ Gelation Behavior and Enhanced Oil Recovery Ability of Polymer Gel Used for Controlling CO2 Channeling in Tight Fractured Reservoir

Molecular insight into the interfacial microstructural and miscible behavior of CO 2 flooding in tight reservoir

Characteristics and mechanism of smart fluid for sweep-controlling during CO 2 flooding

Identification of Gas Channeling and Construction of a Gel-Enhanced Foam Plugging System for Oxygen-Reduced Air Flooding in the Changqing Oilfield

Performance and enhanced oil recovery efficiency of an acid-resistant polymer microspheres of anti-CO2 channeling in low-permeability reservoirs

Cellulose Nanocrystal Switchable Gel for Improving CO2 Sweep Efficiency in Enhanced Oil Recovery and Gas Storage

Study on Plugging Mechanism of Gel Plugging Agent in Fractured Carbonate Oil Reservoirs

Experimental Evaluation of the Rheological Properties and Influencing Factors of Gel Fracturing Fluid Mixed with CO2 for Shale Gas Reservoir Stimulation