Abstract:Titanium metal is primarily produced via the Kroll process, which is characterized by a semi-continuous production flow and a lengthy process cycle, resulting in high production costs. Researchers have explored alternative methods for titanium production, including molten salt electrolysis, such as the Fray–Farthing–Chen (FFC), Ono Suzuki (OS), and University of Science and Technology Beijing (USTB) processes, aiming to achieve more economical production. Among these, the USTB process, a representative of soluble anode electrolysis, has shown significant promise. However, controlling oxygen concentration in titanium produced by soluble anode electrolysis remains a challenge. This study proposes a novel approach to enhance deoxidation efficiency in soluble anode electrolysis for titanium production by introducing yttrium chloride (YCl3) into the molten salt electrolyte. Thermodynamic analysis and experimental validation demonstrate that the theoretical deoxidation limit for titanium can reach below 100 ppm under Y/YOCl/YCl3 equilibrium. We report the successful synthesis of titanium powder with an oxygen concentration of 6000 ppm from titanium-carbon-oxygen solid solution. Under optimized conditions, the purity of the titanium powder reached 99.42%, demonstrating a new approach for producing high-purity titanium. This method, based on soluble anode electrolysis, offers a potential alternative to the conventional Kroll process. The research elucidates the fabrication process and analytical methods for titanium-carbon-oxygen solid solution, and employs a combination of analytical techniques, including XRD, SEM-EDS, and ONH Analyzer, for characterization of the electrolytic product, encompassing phase analysis, microstructure, and oxygen concentration testing.

A Study of Production Process of Uranium Metal by Molten Salt Electrolysis Using Zinc Cathode: A Study of Uranium Chloride Production Step

Chlorination of uranium metal to uranium trichloride using ammonium chloride

Synthesis and Characterization of Uranium Trichloride in Alkali-Metal Chloride Media

Chlorination of UO2, PuO2 and rare earth oxides using ZrCl4 in LiCl–KCl eutectic melt

Chlorination of uranium metal in molten NaCl-CaCl2 via bubbling HCl

Study on the electrodeposition of uranium in chloride molten salt

Electrochemical Behavior and Reduction of UO22+ in LiCl-KCl Molten Salt

Separation of U4+/UO22+ from the Chloride Molten Salts with Microplasma Gaseous Anodes

Chlorination of HALEU regulus casting dross

Fundamental study on synthesis and enrichment of titanium subchloride

Chemical Species Transformation During the Dissolution Process of U3O8 and UO3 in the LiCl-KCl-AlCl3 Molten Salt

Chemical Species Transformation during the Dissolution Process of U 3 O 8 and UO 3 in the LiCl–KCl–AlCl 3 Molten Salt

The Electrode Kinetics of UCl3 in LiCl-KCl Molten Salt

In Situ Chlorine Generation and Rare Earth Chlorination by Molten Salt Electrolysis

Confirmation and elimination of cyclic electrolysis of uranium ions in molten salts

Preparation of the First Electrolytic Plutonium and of Uranium from Fused Chlorides

High temperature UCl3 synthesis in molten salt mixtures via reaction of U metal with iron chlorides

Electrochemical Electron Transfer and Crystallization Process of Uranium (vi) in Sodium Salt Solution

Preparation of Titanium Metal by Deoxygenation Under KCl-NaCl-YCl3 System Using Soluble Anode

Studies on the Electrodeposition of UO 2 Production in UO 2 Cl 2 -LiCl-KCl Melt

Review—Fundamental Uranium Electrochemistry and Spectroscopy in Molten Salt Systems: Uranium Electrochemistry and Spectroscopy in Molten Salts