Abstract:The signification of fast breeder reactors as an inexhaustible source of energy has been elucidated by many researchers. Molten Salt Reactors (MSRs) show great promise in fuel cycle performance. Fuel selection for MSRs is a key parameter due to its effect on many fundamental parameters of neutronic, safety, and fuel cycle through the neutron spectrum changes. choosing the fuel for MSRs has many degrees of freedom due to the variety of salts, carrier salts, and fissile and fertile isotope types. The foremost objective of this paper is a comparison of performance of fluoride and chloride fuels with the Th-U cycle for Molten Salt Fast Reactor (MSFR) concept. For this purpose, six fuels with start-up fissile isotopes of 233 U, TRansUranium (TRU), and TRU/ enr U are modeled by Monte Carlo Serpent 2 code. According to the MSFR design, the fuel compositions of three fluoride fuels are chosen from different conceptual designs. Chloride fuels, however, are selected based on the limit of the maximum melting point of salts (565 °C), criticality at the beginning of the cycle (BOC), and inherent safety criteria (temperature reactivity coefficients). The most important evaluated parameters include the energy spectrum, absorption and fission reaction rate, kinetic parameters, temperature reactivity coefficients, power density distribution, breeding ratio, and inventory changes of important isotopes during the burnup cycle. The results reveal neutron spectrum is less fast with fluoride salt; in contrast neutron leakage of chloride fuels are more than fluoride fuels due to their harder spectrum and transparency. Furthermore, the high leakage reduces the neutron budget required for breeding 232 Th to 233 U and the low density of chloride fuels causes a lower loading of fissile and fertile isotopes in the reactor. Therefore, using chloride fuels leads to larger core volume and need a proper reflector to reduce neutron leakage; Anyway, the U-Pu cycle shows better indications of the breeding for chloride fuels than the Th-U cycle. By the way corrosion and radioactivity of generated elements in chloride fuel circuit are serious problems.

Chlorination of uranium metal to uranium trichloride using ammonium chloride

Chlorination of uranium metal in molten NaCl-CaCl2 via bubbling HCl

Synthesis and Characterization of Uranium Trichloride in Alkali-Metal Chloride Media

A Study of Production Process of Uranium Metal by Molten Salt Electrolysis Using Zinc Cathode: A Study of Uranium Chloride Production Step

Ab-Initio molecular dynamics simulations of binary NaCl-ThCl4 and ternary NaCl-ThCl4-UCl3 molten salts

Synthesis of americium trichloride via chlorination of americium oxide using zirconium tetrachloride in LiCl–KCl molten salt

Chlorination of UO2, PuO2 and rare earth oxides using ZrCl4 in LiCl–KCl eutectic melt

High temperature UCl3 synthesis in molten salt mixtures via reaction of U metal with iron chlorides

Preliminary Study on the Candidate Fuel Salt of Molten Chloride Salt Fast Reactor

Adding MgCl2 to Molten NaCl‐UCl n (n=3, 4): Insights from First Principles Molecular Dynamics

Neutronic and fuel cycle performance analysis of fluoride and chloride fuels in Molten Salt Fast Reactor (MSFR)

Study on the electrodeposition of uranium in chloride molten salt

Separation of U4+/UO22+ from the Chloride Molten Salts with Microplasma Gaseous Anodes

Chemical Species Transformation During the Dissolution Process of U3O8 and UO3 in the LiCl-KCl-AlCl3 Molten Salt

Chlorination of HALEU regulus casting dross

Thermal properties of binary chlorides relevant to molten salt chemistry

A comparison of actinide halides for use in molten salt reactor fuels

Dissolution Behavior of Simulated Spent Nuclear Fuel in LiCl-KCl-UCl3 Molten Salt

Chemical Species Transformation during the Dissolution Process of U 3 O 8 and UO 3 in the LiCl–KCl–AlCl 3 Molten Salt

The chlorination and separation of aluminum using low-temperature sulfur chloride reagents

Molecular dynamics simulations of structural and transport properties of molten NaCl-UCl3 using the polarizable-ion model