Separation of strontium from simulated oxide fuel using molten chloride salts
Eun-Young Choi,Hamin Choi,Jimin Han,Seungwoo Paek,Dokyu Kang,Sang- Kwon Lee,Chang Hwa Lee
DOI: https://doi.org/10.1016/j.jnucmat.2024.154937
IF: 3.555
2024-01-29
Journal of Nuclear Materials
Abstract:The increased use of nuclear energy has led to a greater amount of used nuclear fuel, requiring an expansion of geological final disposal areas. The reduction of the disposal area can be achieved through the extraction of high heat-generating radioactive isotopes such as Sr-90 from used nuclear fuel. The chemical reaction of Sr with molten chloride salts is a promising technique to achieve separation. In this study, the separation of Sr from a simulated oxide fuel is investigated using various molten chloride salts, namely LiCl-CaCl 2 , MgCl 2 , LiCl-KCl-MgCl 2 , LiCl, and NaCl-MgCl 2 . As per the results, the highest separation efficiency is achieved with the LiCl-CaCl 2 salt, which reacted with 97% of the Sr in the fuel, resulting in its dissolution. The second best separation is observed for MgCl 2 . Conversely, the Sr separation efficiencies from LiCl, NaCl-MgCl 2 , and LiCl-KCl-MgCl 2 are found to be relatively much lower. Furthermore, to determine the Sr separation efficiency, the reactivity of SrO with the salts is studied. The high separation efficiency of Sr in the CaCl 2 salt is due to the active reaction of SrO, which led to the formation of Sr 4 OCl 6 and Ca 0.46 Sr 0.54 Cl 2 and their dissolution in the salt. The reaction of SrO with MgCl 2 produces SrCl 2 and Sr 4 OCl 6 in the salt. In contrast, NaCl and KCl do not react with the SrO. Therefore, the eutectic salts containing unreactive salts (NaCl-MgCl 2 , and LiCl-KCl-MgCl 2 ) exhibit less reactivity with SrO.
materials science, multidisciplinary,nuclear science & technology