Abstract:The main purpose of this paper is to study the extraction and separation of key fragment elements based on the electrolytic refining process of spent fuel dry reprocessing. Firstly, the electrochemical mechanisms of Er(III) and Yb(III) in LiCl-KCl molten salts were investigated on W and In film electrodes with applied cyclic voltammetry (CV), square wave voltammetry (SWV) and open circuit potential (OCP) at 773 K. The results indicated that the reduction behaviour of In(III) and Yb(III) ions were a two-step transfer process and Er(III) ions was a one-step transfer process. Then, the kinetic parameters in electrochemical processes were calculated on an In electrode with different temperatures. The OCP approach was used to determine the equilibrium potential of Er(III)/Er(0) in the temperature range of 773 K∼848 K, and thermodynamic parameters of the In 3 Er alloy were provided. Based on electrochemical behaviour results, the electrochemical extraction of Er(III) and Yb(III) from LiCl-KCl-ErCl 3 molten salts and LiCl-KCl-YbCl 3 molten salts at liquid In electrodes was performed by constant potential and constant current electrolysis, respectively. The electrolysis products were determined by X-ray diffraction (XRD), scanning electron microscopy and energy dispersive spectrometry (SEM-EDS), the primary intermetallic compounds generated in the alloys were In 3 Er and In 3 Yb. The average extraction rates for Er(III) and Yb(III) were 94.70% and 96.54%, respectively, according to inductively coupled plasma atomic emission spectroscopy (ICP-AES) analysis. Er(III) and Yb(III) were selectively extracted and separated from LiCl-KCl-ErCl 3 -YbCl 3 molten salts by potentiostatic control on the basis of the previously studied Lns (Er and Yb) extraction on In electrodes. The separation rate of Er(III) and Yb(III) by electrochemical selective deposition was 94.21%.

Separation of uranium from lanthanides (La, Sm) with sacrificial Li anode in LiCl-KCl eutectic salt

Accelerated Separation of Uranium from Lanthanides (La, Ce, Sm) in LiCl-KCl Eutectic by Porous Aluminum Electrodes

Electroseparation of uranium from lanthanides (La, Ce, Pr, Nd and Sm) on liquid gallium electrode

Confirmation and elimination of cyclic electrolysis of uranium ions in molten salts

Separation of U4+/UO22+ from the Chloride Molten Salts with Microplasma Gaseous Anodes

Separation of lanthanides erbium and ytterbium on indium electrodes by modulated potential selective extraction in molten salts and a thermodynamic and kinetic analysis of the process

Electrochemical Drawdown of U 3+ and Ce 3+ in Molten LiCl-KCl Using a Liquid Cadmium Cathode

Liquid Electrodes for An/Ln Separation in Pyroprocessing

Selective Electrochemical Separation and Recovery of Uranium from Mixture of Uranium(VI) and Lanthanide(III) Ions in Aqueous Medium

Efficient Separation of Uranium and Lanthanides Based on High-Performance Ion Exchange Chromatography

Electrochemical Behavior and Reduction of UO22+ in LiCl-KCl Molten Salt

Salt clean-up for recycling by electrolysis with a cathode-perforated ceramic container assembly

Selective separation of rare earth, Sr, Mo, and Zr from simulated raffinate of uranium/plutonium co-purification process

The Electrode Kinetics of UCl3 in LiCl-KCl Molten Salt

Multiphysics Simulation Study of the Electrorefining Process of Spent Nuclear Fuel from LiCl-KCl Eutectic Molten Salt

Uranium elimination and recovery from wastewater with ligand chelation-enhanced electrocoagulation

Selective electro-oxidative separation of Sm, Yb, and Eu in low-temperature molten salt AlCl 3 -NaCl

A reductive strategy with ultrahigh selectivity for sequential recovery of uranium from radioactive wastewater

Study on the electrodeposition of uranium in chloride molten salt

Lanthanide Silicide Formation on Si Electrode in LiCl–KCl Melt for Immobilization of Chloride Waste in Pyroprocessing of Nuclear Fuels

Reactive-crystallization method for purification of LiCl salt waste