Separation of lanthanides erbium and ytterbium on indium electrodes by modulated potential selective extraction in molten salts and a thermodynamic and kinetic analysis of the process
Zhaoyang Wang,Yinshan Zhang,Yanhua Shi,Zhinmin Dong,Yuanping Jiang,Qian Liu,Zifan Li,Yuhui Liu,Xiaohong Cao,Yingcai Wang,Zhibin Zhang,Yunhai Liu
DOI: https://doi.org/10.1016/j.jallcom.2023.171600
IF: 6.2
2023-08-16
Journal of Alloys and Compounds
Abstract:The main purpose of this paper is to study the extraction and separation of key fragment elements based on the electrolytic refining process of spent fuel dry reprocessing. Firstly, the electrochemical mechanisms of Er(III) and Yb(III) in LiCl-KCl molten salts were investigated on W and In film electrodes with applied cyclic voltammetry (CV), square wave voltammetry (SWV) and open circuit potential (OCP) at 773 K. The results indicated that the reduction behaviour of In(III) and Yb(III) ions were a two-step transfer process and Er(III) ions was a one-step transfer process. Then, the kinetic parameters in electrochemical processes were calculated on an In electrode with different temperatures. The OCP approach was used to determine the equilibrium potential of Er(III)/Er(0) in the temperature range of 773 K∼848 K, and thermodynamic parameters of the In 3 Er alloy were provided. Based on electrochemical behaviour results, the electrochemical extraction of Er(III) and Yb(III) from LiCl-KCl-ErCl 3 molten salts and LiCl-KCl-YbCl 3 molten salts at liquid In electrodes was performed by constant potential and constant current electrolysis, respectively. The electrolysis products were determined by X-ray diffraction (XRD), scanning electron microscopy and energy dispersive spectrometry (SEM-EDS), the primary intermetallic compounds generated in the alloys were In 3 Er and In 3 Yb. The average extraction rates for Er(III) and Yb(III) were 94.70% and 96.54%, respectively, according to inductively coupled plasma atomic emission spectroscopy (ICP-AES) analysis. Er(III) and Yb(III) were selectively extracted and separated from LiCl-KCl-ErCl 3 -YbCl 3 molten salts by potentiostatic control on the basis of the previously studied Lns (Er and Yb) extraction on In electrodes. The separation rate of Er(III) and Yb(III) by electrochemical selective deposition was 94.21%.
materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering