Abstract:Nanostructured Ni–Fe alloy coatings were developed galvanostatically using a new low-concentration bath. The composition and operating parameters of the bath were optimised by taking the benefit of the conventional Hull cell method. Ni–Fe alloy coatings were developed at different current densities (2.0 to 5.0 A dm −2 ), keeping pH = 2.5. The corrosion behaviour of electrodeposited alloy coatings was evaluated in 3.5% NaCl solution, using Electrochemical Impedance Spectroscopy (EIS) and potentiodynamic polarisation methods. Ni–Fe alloy coating, deposited at 2.0 A dm −2 exhibited a lesser corrosion rate (14.71 × 10 −2 mm y −1 ) than those at higher current densities. The lowest corrosion rate was attributed to its least crystallite size (10.4 nm), evidenced by an X-Ray Diffraction (XRD) study. The corrosion performance of Ni–Fe alloy coatings was discussed in the light of their surface morphology and composition, evidenced by SEM and Energy-Dispersive X-ray spectroscopy (EDS) analysis, respectively. On a développé de manière galvanostatique des revêtements en alliage Ni–Fe en utilisant un nouveau bain à faible concentration. On a optimisé la composition et les paramètres de fonctionnement du bain en profitant de la méthode conventionnelle de la cellule de Hull. On a développé des revêtements en alliage Ni–Fe à différentes densités de courant (2.0 à 5.0 A dm −2 ), en maintenant le pH = 2.5. On a évalué dans une solution de NaCl à 3.5% le comportement à la corrosion des revêtements de l'alliage électrodéposés, en utilisant les méthodes de spectroscopie d'impédance électrochimique (EIS) et de polarisation potentiodynamique. Il s'est avéré que le revêtement en alliage Ni–Fe déposé à 2.0 A dm −2 présentait le taux de corrosion le plus faible (14.71 × 10 −2 mm an −1 ), comparé à ceux présentant des densités de courant plus élevées. Le taux de corrosion le plus faible était attribué à la plus petite taille de cristallite (10.4 nm), mise en évidence par une étude de diffraction des rayons X (DRX). On a discuté de la performance à la corrosion des revêtements en alliage Ni–Fe à la lumière de leur morphologie et de leur composition de surface, mises en évidence respectivement par analyse de microscopie électronique à balayage (MEB) et de spectroscopie de rayons X à dispersion d'énergie (EDS).

Electrodeposition of Nanocrystalline Fe-P Coatings: Influence of Bath Temperature and Glycine Concentration on Structure, Mechanical and Corrosion Behavior

Electrodeposition and corrosion behaviour of nanocrystalline Fe–P coatings

'Green' Cr(iii)-glycine electrolyte for the production of FeCrNi coatings: electrodeposition mechanisms and role of by-products in terms of coating composition and microstructure

Microstructure and Properties of Electrodeposited Nanocrystalline Ni-Co-Fe Coatings

Electroless Deposition of Ni-Co-P Deposit on NdFeB Permanent Magnets and Its Corrosion Resistance Property

Effect of electroless deposition on the corrosion resistance property for NdFeB permanent magnets with surface coating of Ni-P alloy

Electrochemical Behavior of Nanostructured Fe-Pd Alloy During Electrodeposition on Different Substrates

Evaluation of corrosion resistance of electrodeposited nanocrystalline Ni–Fe alloy coatings

Electrodeposition of Ni-P composite coatings: A review

Electrochemical development and characterisation of nanostructured Ni–Fe alloy coatings for corrosion protection

Effects of NaH2PO2 concentration and deposition potential on microstructural characteristics and corrosion properties of electrodeposited amorphous Fe–P coatings

Preparation, characterisation and electrochemical study of crack-free nanocrystalline electrodeposited Co-W alloy coating of high hardness

Electrodeposition of nanocrystalline Ni-Mo alloys in pyrophosphate baths

Microstructure and corrosion behavior of Cr and Cr–P alloy coatings electrodeposited from a Cr(III) deep eutectic solvent

Electrodeposition of Nanocrystalline Chromium Coatings from 1-Butyl-3-methylimidazolium-hydrogen Sulfate Ionic Liquid

Influence of the bath pH value on the microstructure and properties of a novel electrodeposited Ni-W-Ti3C2TX composite coating

Effect of bath temperature on electrodeposition behaviour and corrosion properties of amorphous Fe–P alloys obtained from additive-free chloride baths

Effect of Surface Roughness and Structure Features on Tribological Properties of Electrodeposited Nanocrystalline Ni and Ni/Al2O3 Coatings

Electrochemical Synthesis and Characterization of Ni–P Alloy Coatings from Eutectic–Based Ionic Liquid

Studies of electroless Ni–Co–P ternary alloy on glass fibers

Investigating Tribological Properties of Electrophoretically Deposited Graphene Nanoplatelets Coatings on Mild Steel