Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Advanced Materials for Thin‐Film Solid Oxide Fuel Cells: Recent Progress and Challenges in Boosting the Device Performance at Low Temperatures

Solid‐Oxide Fuel Cells: Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating Below 500 °C (Adv. Mater. 48/2017)

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

Recent Advances to the Development of Low‐Temperature Solid Oxide Fuel Cells

Advances in Solid Oxide Fuel Cell Technologies: Lowering the Operating Temperatures Through Material Innovations

Materials Development for Intermediate-Temperature Solid Oxide Electrochemical Devices

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Advances in Cathode Materials for Solid Oxide Fuel Cells: Complex Oxides without Alkaline Earth Metal Elements

Progress in proton‐conducting oxides as electrolytes for low‐temperature solid oxide fuel cells: From materials to devices

A mini review of the recent progress of electrode materials for low-temperature solid oxide fuel cells

High Performance Solid-Oxide Fuel Cell: Opening Windows to Low Temperature Application

A review on materials, advantages, and challenges in thin film based solid oxide fuel cells

Recent advances, practical challenges, and perspectives of intermediate temperature solid oxide fuel cell cathodes

The composite electrolyte materials for low-temperature solid oxide fuel cell

Development of Low-to-intermediate Temperature Solid State Oxide Fuel Cells

Toward Reducing the Operation Temperature of Solid Oxide Fuel Cells: Our Past 15 Years of Efforts in Cathode Development

Latest progress in fabrication and performance study of anode materials for solid oxide fuel cells

Alternative preparation methods of thin films for solid oxide fuel cells: review

Advances in Ceramic Thin Films Fabricated by Pulsed Laser Deposition for Intermediate-Temperature Solid Oxide Fuel Cells

Progress of cathode materials for intermediate and low-temperature solid oxide fuel cells

Enhancing performance of lower-temperature solid oxide fuel cell cathodes through surface engineering: A review