Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Aluminium matrix composites significantly benefit the manufacturing sector due to the high strength-to-weight ratio. However, grain refinement was one of the major problems faced by the research community and also as-cast AA6063 contained eutectic silicon with sharp, long elongated laths that consequently reduces strength and limit their applications. So, the prime novelty of this research work is to refine the grains by performing the cold rolling operation in AA6063 and incorporating rice husk ash and coal fly ash in the AA6063 matrix to break those eutectic laths which attributes to the enhancement of the mechanical properties. Rice husk ash and coal fly ash were chosen because they are economical, possess low density and are available in enormous quantities as solid waste by-products. They contain a substantial concentration of SiO2 and serve as a viable reinforcement for improving the mechanical properties of aluminium composites. In this research, the grain characteristics along with the mechanical properties of aluminium composites reinforced with rice husk ash and coal fly ash, produced by the stir casting technique were investigated. The reinforcements were added in varying concentrations (1.5 and 3.0 wt.%). Six specimens were fabricated of which five were cold rolled. Image J and Origin software was used in evaluating the average grain size of the fabricated alloys and their composites. The results were discussed with the help of grain size distribution and profile plots. Structural and composition studies were done using scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction spectroscopy. Hardness and tensile tests were performed on the fabricated composites. The outcome of this research reveals, AA6063-3 wt.% rice husk ash composite has improved hardness (84HV) and tensile strength (156 MPa). Moreover, the average grain size of 10.52 μm was the main reason for the attainment of enhanced mechanical properties.

Manufacturing of Ultra-Fine Particle Coal Fly Ash–A380 Aluminum Matrix Composites with Improved Mechanical Properties by Improved Ring Milling and Oscillating Microgrid Mixing

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Enhanced mechanical behaviour and grain characteristics of aluminium matrix composites by cold rolling and reinforcement addition (Rice husk ash and Coal fly ash)

Mechanical and Micro-Structural Behavior of Lignite Coal Based Fly-Ash and Microsphere Reinforced Al 6061 Metal Matrix Composite

Fly Ash Particle Reinforced AA6061 Composites Produced by Recycling of Aluminum Chips and Fly Ash Particles

Fabrication of Al2O3-SiC-mullite composites from fly ash

Influence of the Fly Ash Material Inoculants on the Tensile and Impact Characteristics of the Aluminum AA 5083/7.5SiC Composites

Waste recycling of coal fly ash: A novel approach to prepare hierarchically porous coal fly ash/Al2O3 ceramic composite with high porosity and high strength templated by emulsion-assisted self-assembly

Enhancing wear resistance of aluminum 6061 composites with fly ash: A sustainable approach for industrial applications

Influence of Particle Size on Microstructure and Sliding Wear Response of Fly Ash and Rice Husk Ash Reinforced Al6061 MMCs

Physical, Mechanical, and Tribological Properties of Industrial Waste Fly Ash Reinforced AA5083 Composites Fabricated by Stir Casting Process

Fabrication of Al<sub>2</sub>O<sub>3</sub>-SiC-Mullite Composites from Fly Ash

Mechanical properties and fractography of SiC and fly ash particulates reinforced Al2024 alloy aerospace metal composites

Synthesis and characterisation of advanced ball-milled Al-Al2O3 nanocomposites for selective laser melting

Effectively enhanced strength by interfacial reactions in in-situ carbon reinforced Al matrix composites

Balanced Mechanical and Tribological Performance of High-Frequency-Sintered Al-SiC Achieved via Innovative Milling Route—Experimental and Theoretical Study

Experimental Investigation on Metal Matrix Nanocomposite: Aluminium Alloy 6061 and 7075 with SiC and Fly Ash

Comparative study on the characteristics of ball-milled coal fly ash

Influence of coarse grain particles on mechanical properties and fracture behavior in multi-modal Al-based metal matrix composites

Fabrication of AA2024/SiCp Metal Matrix Composite by Mechanical Alloying

Sustainability in the Manufacturing of Eco-Friendly Aluminum Matrix Composite Materials