Abstract:In the present study aluminium metal matrix composites (Al - MMCs) reinforced with different Wt% (2,3,4,5 and 6) of Silicon carbide (SiC) and hybrid composites of aluminium matrix reinforced with different Wt% (2,3,4,5 and 6) of SiC and constantly adding Boron carbide (B 4 C) with 2 wt% were fabricated using a cost effective powder metallurgy (PM) method and the mechanical alloying process. Mechanical properties like micro structure, phase analysis, hardness, compression strength, density, porosity and wear were characterized and investigated for the aluminium matrix composite (AMC) samples. Microstructural characterization of sintered samples was performed using a Scanning electron microscope with energy dispersive X-ray analysis. XRD analysis confirmed the peak identification of Aluminium, SiC and B 4 C particulates in the (Al-MMCs) composites. The hardness values of the composites Al+6wt% SiC and Al+4wt%SiC+2wt%B 4 C were seen as 20.6% higher than those of pure aluminium matrix. Increase in the hardness of the composite was seen due to grain refinement and resistance to dislocation motion. The existence of SiC particles in Al matrix was seen having the ability to improve the hardness value of the composites. The addition of SiC and B 4 C reinforcements in the Al matrix alloy has the potential to greatly increase the compressive strength of the AMCs. The density of hybrid composites was seen having a major impact on the influence of SiC and B 4 C particulates. The wear resistance of the hybrid composites were examined under load range of 5 and 10 N, with sliding speed of 0.1 m/s. The synergistic effect of reinforcing particles was seen as assisting the improvement of wear resistance due to the relative concentration of SiC and B 4 C. The incorporation of SiC and B 4 C reinforcements into the Aluminium matrix hybrid composite can substantially increase the hardness, compressive strength, and wear resistance of the composites.

Fabrication of AA2024/SiCp Metal Matrix Composite by Mechanical Alloying

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Fabrication And Characterization of Al/ Sic/ Gr Hybrid Metal Matrix Composite Fabricated By Powder Metallurgy

Mechanical Property and Machinability of SiCp/Gr/2024Al Composite

Mechanical and wear analysis of AA6061-T6-SiC-TiC-graphite metal matrix composite

Mechanical Properties of Aluminum-4043/Nickel-coated Silicon Carbide Composites Produced via Stir Casting

Creation of an aluminum matrix composite with a core-shell carbide reinforcing phase with improved strength characteristics using selective laser sintering

SiC and MWCNT Blending Actions on Functional Performance of Hybrid AA2024 Alloy Nanocomposite Via Two Step Stir Cast Route

Processing and Characterization of AA2618/Sicp Metal Matrix Composites by Stir Casting Method

The Fabrication and Properties of Particle Reinforced Cast Metal Matrix Composites

Mechanical Characteristics and Wear Behaviour of Al/SiC and Al/SiC/B4C Hybrid Metal Matrix Composites Fabricated Through Powder Metallurgy Route

Aluminum Silicon Carbide Particulate Metal Matrix Composite Development Via Stir Casting Processing

The Microstructures and Mechanical Properties of a 5vol%sic/aa2024 Nanocomposite Fabricated by Powder Metallurgy

Preparation of SiCp/Al MMCs by Ball Milling and Stir Casting

Evaluation of Mechanical Properties of Aluminum-Silicon Carbide Metal Matrix Composite

Investigating the Effect of Particle Sizes of SiC and Graphite on Strengthening of Aluminium Metal Matrix Composites

Investigate the mechanical properties of Aluminium Metal Matrix Composite

Aluminum Alloy Matrix Composite Reinforced with Metallic Glasses Particles Using Hot-Roll Bonding

Influence of characteristic parameters of SiC reinforcements on mechanical properties of AlSi10Mg matrix composites by powder metallurgy

Production Technology Features for Aluminum Matrix Alloys with a Silicon Carbide Framework