Abstract:Reactive ion beam etching is a key technology in the field of ultra-precise surface engineering. In this process nanopatterns can emerge and alter the functional properties of the surfaces. Therefore, it is necessary to understand which reactive ion beam parameters influence the emergence of these nanopatterns. In this study the influence of reactive ion beam etching on the commercially available photoresist AZ (R) 4562 is investigated. Atomic force microscopy and scanning electron microscopy reveal the formation of nanopatterns (ripples, triangular features, protrusions, facets) depending on a wide range of ion incidence angles (0(degrees)-75(degrees)) as well as the etch time. The emerged nanopatterns resemble those known from inorganic materials and therefore, lead to the assumption that local redeposition, surface viscous flow and dispersion plays an important role for the pattern formation on polymer surfaces. Major difference from ion beam erosion with inert species is the absence of nanoholes. Spectroscopic ellipsometry shows that the thickness of the modified surface layer depends on the ion incidence angle but not on the fluence in the investigated range. Using X-ray photoelectron spectroscopy, trends of the chemical composition of the surface/near-surface region were detected, which depend on ion incidence angle and etch time.

Ion beam etching of dense and porous PZT films

Effect of Microstructure on Reactive Ion Etching of Sol–gel-Derived PZT Thin Film

Effects of vacuum-plasma etching on the electrical properties of thin ferroelectric PZT films

Reduction of etching damage in lead–zirconate–titanate thin films with inductively coupled plasma

Microhardness and tribological properties of polyimide composites modified by 200keV Ar ion implantation

Dewetting and Nanopattern Formation of Thin Pt Films on Sio2 Induced by Ion Beam Irradiation

Surface Microstructure and Phase Structure of Zirconia Ceramics under Intense Pulsed Ion Beam Irradiation

Reactive Ion Etching of Piezoelectric Pb(ZrxTi1−x)O3 in a SF6 Plasma

A Study Of Oxygen Ion Implantation Into Ferroelectric Pb(Zr,Ti)O-3 Films

Electrohydrodynamic Atomization Deposition and Mechanical Polishing of PZT Thick Films

Deep Plasma Etching of Piezoelectric PZT with SF6

Reactive ion etching of piezoelectric Pb(Zr[sub x]Ti[sub 1−x])O[sub 3] in a SF[sub 6] plasma

The Influence of Low-Energy Ion-Plasma Treatment on the Surface Morphology of Pt Films with Varying Strength of Crystalline Texture

Study of the ECR Plasma Etching Process of PZT Ferroelectric Thin Film Materials

Microstructure and Electrical Properties of Lead Zirconate Titanate Thin Films Deposited by Excimer Laser Ablation

Modification of ZrO 2 ceramic by continuous and pulsed electron beams in the forevacuum pressure range

Influence of Low-Temperature Argon Ion-Beam Treatment on the Photovoltage Spectra of Standard Cz Si Wafers

Ion Incidence Angle-Dependent Pattern Formation on AZ® 4562 Photoresist by Reactive Ion Beam Etching

Effect of Argon Ion Irradiation on Grain Orientation in Platinum Thin Films

Study on Wet-etching of PZT Thin Films

Pulsed Excimer Laser Deposition and Rapid Thermal Annealing of Ferroelectric Pb(Zr0.52Ti0.48)O3 Thin Films on Si-on-Insulator