Abstract:The thermal hydraulic characteristics in the vacuum vessel (VV) of a fusion reactor under an ingress of coolant event (ICE) and a loss of vacuum event (LOVA) were investigated quantitatively using preliminary experimental apparatuses. In the ICE experiments, pressure rise characteristics in the VV were clarified for experimental parameters of the wall temperature and water temperature and for cases with and without a blowdown tank. In addition, the functional performance of a blowdown tank with and without a water cooling system was examined and it was confirmed that the blowdown tank with a water cooling system is effective for suppressing the pressure rise during the ICE. In the LOVA experiments, the saturation time in the VV from vacuum to atmosphere was investigated for various breach sizes and it was found that the saturation time is in inverse proportion to the breach size. In addition, the characteristics of exchange flow through breaches were clarified for the different breach positions on the VV. It was proven from the experimental results that the exchange flow became a counter-current flow when the breach was positioned on the top of the VV and a stratified flow when it was formed on the side wall of the VV, and that the exchange flow under the stratified flow condition was smoother than that of counter-current flow. On the basis of these results, the severest breach condition in ITER was changed from the top-break case to the side-break case. To predict with high accuracy the thermal hydraulic characteristics during ICEs and LOVAs under ITER conditions, a large scale test facility will be necessary. The current conceptual design of the combined ICE-LOVA test facility with a scaling factor of 1/1000 in comparison with the ITER volume is presented.

ITER Tokamak Cooling Water System Design Status

Concept Design of Fusion Power Shutdown System for ITER

Installation Progress of the Central Solenoid (CS) on ITER Site

Manifold concept design for ITER gas injection system

Design Evolution and Integration of the ITER In-Vessel Components

Analysis and Optimization of Cooling Channels in ITER Blanket Module

Turbulent Heat Transfer for Coolant Water Flow in Plasma Facing Component

ITER blanket manifold system: Integration, assembly and maintenance

Computational Thermal-Fluid Dynamics analyses of borated water distribution in the Vacuum Vessel of the Divertor Tokamak Test facility

MCNP Models for Tokamak Cooling Water System Equipment Evaluations

Fundamental study of a water jet injected into a vacuum vessel of fusion reactor under the ingress of coolant event

Preliminary Design of Water-Cooling System for Liquid Metal Divertor Target Test Module in EAST

Numerical Study on Direct-Contact Condensation of Vapor in Cold Water

Thermal Hydraulic Characteristics During Ingress of Coolant and Loss of Vacuum Events in Fusion Reactors

Using Dispersed Gas Fluid Flow for Cooling of Energy Stressed Elements of Tokamak Structure

Fully Active Cooled In-vessel Components of EAST Tokamak

A description of the ITER's gas injection systems and current R&D activities

Proposal of Integrated Test Facility for in-Vessel Thermofluid Safety of Fusion Reactors

Preliminary Design of A Solid Particulate Cooled Blanket for the Steady-State Tokamak Reactor (Sstr)

Maintenance Oriented Tokamak Reactor With Low Activation Material And High Aspect Ratio Configuration

Design of the ITER TF Magnet Feeder Systems