Abstract:Thermohydraulic analysis of postulated accidents will identify system responses to accident scenarios and aid in developing design of safety systems and strategies to prevent or mitigate accident propagation. This paper reports analyses of four accident scenarios of a fusion DEMO reactor based on water-cooled ceramic-pebble breeder blanket. The accidents analyzed, which were selected based on the previous logical accident analysis, are ex-vessel loss of coolant of the primary cooling system, in-vessel loss of coolant of the first wall (FW) cooling pipes, loss of coolant in blanket modules, and loss of vacuum. The analyses have identified thermohydraulic responses of the DEMO systems to these accidents, pressure loads to confinement barriers for radioactive materials. Effectiveness of the safety systems and the integrity of the primary and final (secondary) confinement barriers against the accidents are discussed. As for the final confinement barrier, we show for the first time that implementation of a pressure suppression system (PSS) to the cooling system vault and a vacuum breaker to the tokamak pit is effective in significantly keeping the integrity of the final confinement barrier against the ex-vessel loss-of-coolant and loss-of-vacuum accidents, respectively. As for the primary confinement barrier, we show for the first time that limitation of the number of blankets from which a helium purge gas line collects the bred tritium will be a key technical issue to prevent propagation of loss of coolant in a blanket box through the purge gas line and then suppress the pressurization of the vacuum vessel (VV). For the in-vessel loss of coolant of the FW cooling pipes, further optimization of the PSS or design solutions regarding in-vessel components and plasma control will be necessary to decrease the pressure load to the VV and ensure the integrity of the primary confinement barrier.

Concept Design of Fusion Power Shutdown System for ITER

Preliminary Design of the Fusion Power Shutdown System Unit for ITER

System Requirements and Design Challenges of the Gas Injection System of Iter

Manifold concept design for ITER gas injection system

Structural Integrity Analysis for Final Design of ITER Gas Fueling Manifold

Plasma Shutdown System for Fusion Experimental Reactors

Leak Detection Design for ITER GIS Gas Fueling Manifold

Concept of plasma shutdown system for fusion experimental reactors

Conceptual Design of the ITER Gas Injection System

A description of the ITER's gas injection systems and current R&D activities

Comprehensive Safety Analysis Code System for Nuclear Fusion Reactors III: Ex-Vessel LOCA Analyses Considering Passive Safety

Proposal of Integrated Test Facility for in-Vessel Thermofluid Safety of Fusion Reactors

Design of SIL-2 Interlock Function for Tokamak Fusion Reactor

Structural Design for ITER Gas Injection System Gas Fueling Gas Valve Box

Safety analysis of plasma anomaly consequences in fusion reactors

Analyses for Passive Safety of Fusion-Reactor During Ex-Vessel Loss-Of-Coolant Accident

Conceptual Design of a Compact Divertor Heat Load Simulation Device: HIT-PSI

Fusion Safety Experiments in Jaeri

Fundamental study of a water jet injected into a vacuum vessel of fusion reactor under the ingress of coolant event

Thermohydraulic Analysis of Accident Scenarios of a Fusion DEMO Reactor Based on Water-Cooled Ceramic Breeder Blanket: Analysis of LOCAs and LOVA

Installation Design and Integration of Poloidal Field Converter Units for ITER