Abstract:The SOLPS-ITER code is utilized to analyze the boundary plasma associated with a fast-flow lithium (Li) divertor configuration in the Fusion Nuclear Science Facility (FNSF) tokamak and identify operational regimes with acceptable divertor and core conditions. Plasma transport from the SOLPS-ITER code has been coupled with a liquid metal (LM) MHD/heat transfer code to model a Li open-surface divertor design and assess its impact on the scrape-off-layer (SOL) and core plasma performance. Simulations with only Neon (Ne) impurity seeding have been conducted to evaluate its impact on meeting FNSF design demands for the divertor and upstream plasma parameters. Simulation results indicate that Ne seeding significantly mitigates divertor heat flux but potentially reduces both upstream electron and main ion density due to fuel dilution. The combined application of Ne seeding and deuterium (D 2 ) puffing is required to satisfy the FNSF design requirements on upstream density (1e20) and divertor energy flux ( < 10 MW/m 2 ). D 2 puffing plays a role in counteracting upstream density drops and augmenting energy and momentum losses through atomic and molecular processes. The inlet Li flow velocity is systematically varied across a wide range to identify acceptable flows and corresponding LM surface temperatures. This comprehensive analysis identifies the acceptable Li flow parameters, LM surface temperature, and emitted Li fluxes necessary to meet the major design constraints. The emitted Li fluxes exhibit minimal impact on the main plasma at surface temperatures up to approximately 525^C, corresponding emitted Li fluxes of up to 2e23 atoms/s. Uncertainties in the Li emission processes from the surface are also investigated, primarily influencing Li loss in the lower surface temperature range (525C). Conversely, evaporation predominantly drives the Li loss processes at higher surface temperature ranges (525C), contaminating both the divertor and upstream plasma.

Analyses for Passive Safety of Fusion-Reactor During Ex-Vessel Loss-Of-Coolant Accident

Comprehensive Safety Analysis Code System for Nuclear Fusion Reactors III: Ex-Vessel LOCA Analyses Considering Passive Safety

Thermohydraulic Analysis of Accident Scenarios of a Fusion DEMO Reactor Based on Water-Cooled Ceramic Breeder Blanket: Analysis of LOCAs and LOVA

Safety analysis of plasma anomaly consequences in fusion reactors

Preliminary Severe Accident Analysis For Fusion-Fission Hybrid Reactor Using The Melcor Code

Thermal Hydraulic Characteristics During Ingress of Coolant and Loss of Vacuum Events in Fusion Reactors

Progress in Thermohydraulic Analysis of Accident Scenarios of A Water-Cooled Fusion Demo Reactor

Analysis and Experimental Results on Ingress of Coolant Event in Vacuum Vessel

Safety scenario and integrated thermofluid test

Feasibility study of applying the passive safety system concept to fusion–fission hybrid reactor

3D transient CFD simulation of an in-vessel Loss-Of-Coolant Accident in the EU DEMO fusion reactor

Fusion Safety Experiments in Jaeri

Preliminary Analysis of In-Vessel First Wall Cooling Pipe Ruptures for ITER

Preliminary Safety Assessment on Two LOCAs under ITER-like Condition for the Optimized CFETR Helium Cooled Solid Breeder Blanket

Analysis on Cooling Capacity of Passive Core Cooling System during LOCA Scenarios

Preliminary transient thermal analysis for safety of the dual-cooled waste transmutation blanket for the FDS-I

Preliminary safety analysis of an in-vessel LOCA for the EU-DEMO WCLL blanket concept

Analysis of AP1000 Containment Passive Cooling System During a Loss-of-coolant Accident

Transient Coupling Analysis of Loss-of-coolant Accidents in HTR-PM Based on CFD Approaches

Analysis and design of Fast Flow Liquid Li Divertor for Fusion Nuclear Science Facility (FNSF) using coupled plasma boundary and LM MHD/heat transfer codes

Simulation Of Loss-Of-Flow Transient In Water Cooled Fission Blanket Of Fusion Fission Hybrid Energy Reactor (Ffher)