Abstract:Hydrogen explosion is one of the most dangerous accident phenomena in both nuclear fusion and fission reactor. In the typical fusion reactor, tritium and deuterium are fuel elements for fusion reaction, and they exist in condensed state around the cryo‐pump in the normal operation condition. In the accident situation, increasing heat transfer system temperature can mobilize lots of tritium in the vacuum vessel. And then, coolant can react with high‐temperature structures generating hydrogen gas inside vacuum vessel. In addition, air ingress into plasma terminates fusion reaction producing activated dust on the first wall plasma facing surfaces. Through these series of process, mobilized tritium and dust aerosol can explode in the vacuum vessel and damage the containment building integrity, making a sort of source term leakage to environment through various system volumes. In this paper, preliminary safety analysis for hydrogen and dust explosion accident for assumed design of Korean fusion demonstration reactor is conducted. An MELCOR system analysis code is used to simulate this accident and parametric analysis to investigate effect on the accident scale and safety systems like detritiation system such as heating, ventilation, and air conditioning isolation system and pressure suppression system. As a result, aerosol distribution of each control volume and its release route are estimated, and final aerosol release to the environment is compared with release guideline for ITER. The amount of mobilized aerosol in demonstration reactor is evaluated conservatively using ITER normal operation condition. In this study, preliminary safety analysis for hydrogen and dust explosion accident for assumed design of Korean fusion demonstration reactor, which are considered as one of the beyond design basis for ITER, is conducted. The MELCOR system analysis code is used to simulate this accident. As a result, aerosol distribution of each control volume and its release route are estimated, and final aerosol release to the environment is compared with release guideline for ITER. The amount of mobilized aerosol in demonstration reactor is evaluated conservatively using ITER normal operation condition.

Safety analysis of plasma anomaly consequences in fusion reactors

Concept Design of Fusion Power Shutdown System for ITER

Comprehensive safety analysis code system for nuclear fusion reactors IV: Preliminary estimation of dust production due to plasma disruptions

Comprehensive Safety Analysis Code System for Nuclear Fusion Reactors III: Ex-Vessel LOCA Analyses Considering Passive Safety

Analyses for Passive Safety of Fusion-Reactor During Ex-Vessel Loss-Of-Coolant Accident

Fusion Safety Research and Development in JAERI

Numerical Analyses of Electromagnetic Forces on the ITER Blanket Module Shield Block During Major Disruptions

Toward a First-Principles Integrated Simulation of Tokamak Edge Plasmas

Thermohydraulic Analysis of Accident Scenarios of a Fusion DEMO Reactor Based on Water-Cooled Ceramic Breeder Blanket: Analysis of LOCAs and LOVA

Progress in Thermohydraulic Analysis of Accident Scenarios of A Water-Cooled Fusion Demo Reactor

Analysis and Experimental Results on Ingress of Coolant Event in Vacuum Vessel

Plasma Shutdown System for Fusion Experimental Reactors

Analysis of hydrogen and dust explosion after vacuum vessel rupture: Preliminary safety analysis of Korean fusion demonstration reactor using MELCOR

Sensitivity Study on Some Parameters of Disruption Erosion Analysis

Safety scenario and integrated thermofluid test

Concept of plasma shutdown system for fusion experimental reactors

Effects of runaway electrons on plasma facing components

Fusion Safety Experiments in Jaeri

Preliminary risk assessment of in-vessel leakage accident in ITER

Fundamental study of a water jet injected into a vacuum vessel of fusion reactor under the ingress of coolant event

Dynamic Stability Analysis of High-Power DC Reactor for ITER Poloidal Field Converter