Abstract:The Divertor Tokamak Test (DTT) is a new experimental facility whose construction is starting in Frascati, Rome, Italy; its main goals are improving the understanding of plasma-wall interactions and supporting the development of ITER and DEMO. DTT will be equipped with a Neutral Beam Injector (NBI) based on negative deuterium ions, designed to inject 10 MW of power to the tokamak. A fundamental system for the good operations of the DTT NBI will be its Gas injection and Vacuum System (GVS). Indeed, the efficiency of the entire NBI strongly depends on the good performance of its GVS. The GVS for DTT NBI will be composed of two systems working in parallel: a grounded section connected to the main vacuum vessel, and a high voltage part connected to the ion source vessel and working at -510 kV voltage. The grounded part will feature a fore vacuum system (given by screw and roots pumps) plus a high vacuum system based on turbo-molecular pumps located on the side walls of the vessel and Non-Evaporable Getter (NEG) pumps located inside the vessel on the upper and lower surfaces. On the other hand, the high voltage part will feature a fore vacuum system (given by two compact screw pumps mounted on the external surface for the ion source vessel) plus a high vacuum system based on turbo-molecular pumps also located on the sidewalls of the ion source vessel. A dedicated deuterium gas injection will feed the process gas to the ion source and the neutralizer. This paper gives a description of the conceptual design of the GVS for DTT NBI, and of the procedure followed to optimize this system considering the operational requirements and the other constraints of the DTT NBI.

Manifold concept design for ITER gas injection system

Structural Integrity Analysis for Final Design of ITER Gas Fueling Manifold

System Requirements and Design Challenges of the Gas Injection System of Iter

Leak Detection Design for ITER GIS Gas Fueling Manifold

A description of the ITER's gas injection systems and current R&D activities

Concept Design of Fusion Power Shutdown System for ITER

Conceptual Design of the ITER Gas Injection System

Conceptual design of 5 MW-NBI injector for HL-2 M tokamak

Installation Progress of the Central Solenoid (CS) on ITER Site

Plasma behaviour with hydrogen supersonic molecular beam and cluster jet injection in the HL-2A tokamak

Structural Design for ITER Gas Injection System Gas Fueling Gas Valve Box

Design Evolution and Integration of the ITER In-Vessel Components

Conceptual design of the Gas Injection and Vacuum System for DTT NBI

Preliminary Design of the Fusion Power Shutdown System Unit for ITER

Designing of the Massive Gas Injection Valve for the Joint Texas Experimental Tokamak

Experimental Investigation on Liquid-Metal Flow Distribution in Insulating Manifold under Uniform Magnetic Field

ITER blanket manifold system: Integration, assembly and maintenance

Numerical Investigation of the Water Draining Process Pushed by Gas for Several Manifolds with Different Header-Diameter

Design of SIL-2 Interlock Function for Tokamak Fusion Reactor

Conceptual Design of a Compact Divertor Heat Load Simulation Device: HIT-PSI

A supersonic gas injection system for fuelling and probing fusion plasmas