Abstract:DEMO-FNS (DEMO Fusion Neutron Source) will be a hybrid reactor designed to combine fusion and fission technologies. In a hybrid reactor the power is mainly produced by a fission blanket which is exposed to the neutron flux generated by confined fusion plasma used as a Fusion Neutron Source (FNS). The steady-state operation of the FNS is easier to achieve as compared to pure fusion reactors, allowing the FNS to be more compact. The DEMO-FNS will produce 40 MW of fusion power. The neutral beam injectors (NBI) are designed to provide a steady state plasma heating, rotation, fueling, current drive and neutron generation in DEMO-FNS. Four injector units will deliver 30 MW power in deuterium with energy E b = 500 keV. The NBI concept and main components are inspired from ITER HNBI design implementing acceleration of negative ions with their neutralization on gas. The high density of injected power in DEMO-FNS leads to a very specific operation scenario with a higher ratio of high-energy ions in the plasma with respect to conventional tokamaks, where the main part of neutron flux will result from fusion between hot-tail ions and relatively cold background. The current drive and neutron yield produced by the tangentially injected beam in a steady-state operation are strongly affected by magnetic configuration and plasma kinetic profiles. The fast ions deposition and performance in plasma are limited by the losses associated with the neutral beam shape and aiming. The main channels of direct beam losses include shine-through losses, as well as fast ion orbital losses. The detailed evaluation of NB parameters and geometry effects is a necessary step of scenario optimization. BTR code (Beam Transmission or, in earlier versions, Beam Transmission with Reionization) is intended for injector beamlines study, and BTR detailed beam model can be also applied to perform a detailed analysis of beam losses and performance in plasma. The analysis of beam in plasma shows the ways towards higher values of beam driven current (NBCD) and neutral yield; the beam-in-plasma behaviour can be tuned for a given tokamak configuration. The NB tracing model workflow is implemented in the BTOR suite (Beam in TORoids). The results for DEMO-FNS are compared with the NBI performance in ITER tokamak, as both machines are beam-driven and implement a similar NBI concept.

Matter injection technology for DEMO, state of the art

Manifold concept design for ITER gas injection system

System Requirements and Design Challenges of the Gas Injection System of Iter

Pulsed DEMO design assessment studies

DEMO design activity in Europe: Progress and updates

A description of the ITER's gas injection systems and current R&D activities

Beyond ITER: Neutral beams for DEMO

Design Progress of Structural Components of the EU DEMO EC Equatorial Launcher

Status and future development of Heating and Current Drive for the EU DEMO f , Contributors from all Laboratories which have contributed to the Work Package HCD during 2014-2020

Development of a Steam Generator Mock-Up for EU DEMO Fusion Reactor: Conceptual Design and Code Assessment

Developing Structural, High-heat flux and Plasma Facing Materials for a near-term DEMO Fusion Power Plant: the EU Assessment

Thermal–hydraulic study of the Primary Heat Transport System of the EU-DEMO Divertor Plasma Facing Components

Development of pulsed plasma operation scenario and required conditions in JA DEMO

Conceptual design of the Gas Injection and Vacuum System for DTT NBI

Re-design of EU DEMO with a low aspect ratio

DEMO Hot Cell and Ex-Vessel Remote Handling

Plasma Shutdown System for Fusion Experimental Reactors

Induction brazing of DEMO's large bore cooling pipes

The impact of neutral beam parameters on current drive and neutron yield in DEMO-FNS tokamak

DEMO ion cyclotron heating: status of ITER-type antenna design

Conceptual Design of a Modular EC Heating System for EU-DEMO