Abstract:Environmental barrier coatings (EBCs) are increasingly being used in the high-temperature sections of gas turbines because of their protective effects on SiC fiber-reinforced SiC ceramic matrix composites (SiCf/SiC CMCs) when subjected to high-temperature water oxygen corrosion. The objective of this study was to investigate the failure behavior of EBCs prepared on SiCf/SiC CMC matrix materials under coupled high-temperature and load conditions. A plasma spray-physical vapor deposition (PS-PVD) method was used to prepare Si/3Al2O3·2SiO2/Yb2SiO5 EBC composite coatings on the surface of SiCf/SiC ceramic matrix composites. In situ scanning electron microscopy was used to study the evolutionary behavior of the coating surface cracks at different temperatures and the failure and fracture mechanism of the coating/substrate when held at 766 °C and subjected to different loading conditions. The results show that no significant crack extension occurred on the coating surface as the temperature of the coated specimen increased from room temperature to 766 °C in the absence of an applied tensile load, indicating that the effect of a single temperature factor on the failure of the specimen was negligible. However, under coupled high-temperature and load conditions, the specimens fractured at a load of 340 N when subjected to 766 °C, indicating that the coated sample is more likely to fail when subjected to high-temperature and tensile loading. The step-like fracture exhibits features consistent with the coating fracture and spalling caused by surface cracks extending from the coating surface to the interior. The spalling, large crack formation and step-like shape of the fracture in the coating and the substrate indicate that cracks were generated between the coating and the substrate under the coupled high-temperature and load conditions. The generation and extension of cracks in both parts eventually led to full specimen rupture.

Crack Initiation Criteria in EBC under Thermal Stress

Microstructural analysis of the thermal fatigue tested Be/CuCrZr joint with artificial defects between Ti/Cu interlayers

Thermal Shock Damage and Failure Mechanism of 2D Laminated SiC/SiC with Barium‐Strontium Aluminosilicate‐Based Environmental Barrier Coating

Crack Initiation and Propagation Mechanism of Al2O3-DBC Substrate During Thermal Cycling Test

A Diffusion-Coupled Cohesive Element Model for Cracking Analysis of Thermal Barrier Coatings

In Situ High-Temperature Tensile Fracture Mechanism of PS-PVD EBCs

Competition Mechanism of Interfacial Cracks in Thermal Barrier Coating System

Thermal cycling and steam corrosion behavior of Yb3Al5O12‐based multilayered environmental barrier coatings for SiCf/SiC

Interface Fatigue Crack Propagation in Ceramic Thermal Barrier Coatings

A modified simple interface fracture test for ceramic environmental barrier coating on ceramic matrix composite

Effect Of Periodic Surface Cracks On The Interfacial Fracture Of Thermal Barrier Coating System

Experimental Study on the Interfacial Delamination in a Thermal Barrier Coating System at Elevated Temperatures

Numerical Simulation of the Residual Stress at the Interface between Thermal Barrier Coating and Nickel-Based Single-Crystal Superalloy Based on Crystal Plasticity Theory

Study of Failure of EB-PVD Thermal Barrier Coating Upon Near-Α Titanium Alloy

Numerical Study on Interfacial Delamination of Thermal Barrier Coatings with Multiple Separations

Damage Monitoring of Ceramic Matrix Composites Under Tension Loading Via NDE-based DIC Approach

Assessment of Stress Characteristic and Interfacial Delamination in Thermal Barrier Coatings Considering the Connected Crack Network

Mechanisms Governing the Failure Modes of Dense Vertically Cracked Thermal Barrier Coatings

Investigation on Interfacial Fracture Toughness of Plasma-Sprayed TBCs Using a Three-Point Bending Method

Mechanisms of crack healing in dense Yb-Si-O environmental barrier coatings by plasma spray-physical vapor deposition

Determining Interface Fracture Toughness in Multi Layered Environmental Barrier Coatings with Laser Textured Silicon Bond Coat