Abstract:Environmental barrier coatings (EBCs) are crucial to the reliability and durability of SiCf/SiC composite components seeking applications in hot sections of next‐generation advanced aero‐engines. The cracks initiated and developed in EBCs owing to various reasons during service greatly undermine their lifespans. To address this problem, in this work, silicon carbide (SiC) in the forms of particles and whiskers with various amounts have been introduced to ytterbium disilicate (Yb2Si2O7), the mainstream EBC topcoat materials, so as to gain some self‐healing potential. The results reveal that, the SiC inclusions in Yb2Si2O7 in the presence of ytterbium monosilicate (Yb2SiO5) can trigger the following reactions. Specifically, SiC self‐healing agents are oxidized to form viscous SiO2, which actively reacts with Yb2SiO5 upon encountering it, forming Yb2Si2O7. This has brought twofold beneficial effects including 1 silicon supplementation of disilicate topcoat, whose silicon element tends to be "dragged out" by water vapor, leading to the deterioration of thermal mismatch; as well as 2 crack self‐healing resulting from the volume expansion induced by the above reactions. Then the two aspects of self‐healing agents, namely the "promptness" and "sustainability", have been discussed in detail. The former is unveiled to be more pertinent to the repairing of large cracks, whilst the latter is more relevant to the self‐healing of tiny cracks at initiation or early stage of propagation. The current work sheds some lights on the design and development of more durable and robust EBCs with self‐healing capability. This article is protected by copyright. All rights reserved

Improvement in the Self-healing Property of Plasma-Sprayed Environmental Barrier Coatings by SiC Addition

SiC modified self‐healing ytterbium disilicate materials for potential environmental barrier coating application

Mechanisms of crack healing in dense Yb-Si-O environmental barrier coatings by plasma spray-physical vapor deposition

Structure, composition, and defect control during plasma spray deposition of ytterbium silicate coatings

Thermochemical Stability of Yb 2 Si 2 O 7 Environmental Barrier Coatings During Thermal Cycling and Water Vapor Corrosion at 1350 °C

Crack-healing behaviour of MoSi2 dispersed Yb2Si2O7 environmental barrier coatings

Ytterbium Disilicate/Monosilicate Multilayer Environmental Barrier Coatings: Influence of Atmospheric Plasma Spray Parameters on Composition and Microstructure

Rear Earth Oxide Multilayer Deposited by Plasma Spray-Physical Vapor Deposition for Envisaged Application as Thermal/Environmental Barrier Coating

Oxidation resistance and thermal shock behavior of tri-layer Si/Si–Yb2SiO5/Yb2SiO5–SiC environmental barrier coatings at 1300 °C

Failure mechanism of ytterbium silicate/silicon bi-layer environmental barrier coatings on SiCf/SiC composites upon long-time water vapor and oxygen corrosion test

Preparation of SiCw/Yb2Si2O7 Composite Powders for Environmental Barrier Coatings

Densification method of air-plasma-sprayed environmental barrier coatings achieved by pre-heat treatment

Characterization of Yb2SiO5-based environmental barrier coating prepared by plasma spray–physical vapor deposition

Influence of Spraying Power on Microstructure, Phase Composition and Nanomechanical Properties of Plasma-Sprayed Nanostructured Yb-silicate Environmental Barrier Coatings

Investigation of Yb2SiO5/BSAS/Si coating on Cf/SiC composites: processing and steam corrosion behavior

Water Vapor Corrosion Behavior of Yb2SiO5 Environmental Barrier Coatings Prepared by Plasma Spray-Physical Vapor Deposition

Corrosion behavior and failure mechanism of SiC whisker and c-AlPO4 particle-modified novel tri-layer Yb2Si2O7/mullite/SiC coating in burner rig tests

Thermal cycling and steam corrosion behavior of Yb3Al5O12‐based multilayered environmental barrier coatings for SiCf/SiC

Environmental barrier coatings on SiC without a silicon bond coating: oxidation resistance, failure modes, and future improvements

Microstructure and Thermal Property Evolution of Plasma-Sprayed Lu2SiO5 EBCs Under High Temperature Environments

Thermal shock behavior and oxidation resistance of novel SiC nanowires+Si/Yb2Si2O7-Si/Yb2Si2O7 environmental barrier coatings