Abstract:Owing to their superior high-temperature stability, SiC-based ceramic matrix composites are widely used in turbine engine components for launch vehicles and other applications in the aerospace industry. However, because of the deterioration that occurs in these materials in high-temperature wet operating environments, researchers have developed environmental barrier coating technologies to protect the substrate. In this study, a top coat was prepared using Yb2SiO5 and Yb2Si2O7 as the third-generation coating of a rare-earth silicate with high thermal, chemical, and mechanical stability in high-temperature environments above 1400 °C. A new bond coat was prepared, incorporating Si, whose thermal expansion coefficient is similar to that of the SiC substrate, and Hf, which is expected to significantly contribute to high-temperature stability. The coating was prepared by suspension plasma spraying rather than atmospheric plasma spraying to realize a fine coating particle structure; to densify the coating layers, secondary densification coatings were created using ytterbium (III) nitrate pentahydrate (Yb(NO3)3∙5H2O) and tetraethyl orthosilicate (C8H20O4Si). The prepared specimens were measured in terms of weight change and weight change ratio with respect to temperature under high-temperature flames (1400 ℃ and 1700 ℃). After the secondary densification coating, the microstructure of the specimen was observed to be denser and the surface layer of the coating exhibited crystallinity. For the tested samples, a decrease in weight was observed. The largest weight loss was observed under the 1700 ℃ flame.

Thermal cycling and steam corrosion behavior of Yb3Al5O12‐based multilayered environmental barrier coatings for SiCf/SiC

Corrosion behavior and mechanism of ytterbium silicates environmental barrier coatings to thermal cycling in water vapor

Thermal cycle and water oxygen performance of multi-layered Y3Al5O12/Yb2SiO5/Yb2Si2O7 thermal/environmental barrier coatings

Thermochemical Stability of Yb 2 Si 2 O 7 Environmental Barrier Coatings During Thermal Cycling and Water Vapor Corrosion at 1350 °C

Corrosion behavior and failure mechanism of SiC whisker and c-AlPO4 particle-modified novel tri-layer Yb2Si2O7/mullite/SiC coating in burner rig tests

Influence of post heat treatment on the high-temperature performances of multi-layered thermal/environmental barrier coatings on SiC-based composites

Failure mechanism of ytterbium silicate/silicon bi-layer environmental barrier coatings on SiCf/SiC composites upon long-time water vapor and oxygen corrosion test

Cyclic oxidation and water vapor corrosion behaviors of multi-layer environmental barrier coatings with HfO2-Si bond coat for SiCf/SiC

Thermal shock resistance and bonding strength of tri-layer Yb2SiO5/mullite/Si coating on SiCf/SiC composites

Rear Earth Oxide Multilayer Deposited by Plasma Spray-Physical Vapor Deposition for Envisaged Application as Thermal/Environmental Barrier Coating

Oxidation properties of tri-layer ytterbium-disilicate/mullite/silicon-carbide environment barrier coatings for Cf/SiC composites

Water vapor corrosion resistance and failure mechanism of SiCf/SiC composites completely coated with plasma sprayed tri-layer EBCs

Oxidation resistance and thermal shock behavior of tri-layer Si/Si–Yb2SiO5/Yb2SiO5–SiC environmental barrier coatings at 1300 °C

Oxidation behavior and interface evolution of tri-layer Si/Yb2SiO5/LaMgAl11O19 thermal and environmental barrier coatings under isothermal heat treatment at 1300 °C

Water Vapor Corrosion Behavior of Yb2SiO5 Environmental Barrier Coatings Prepared by Plasma Spray-Physical Vapor Deposition

Thermal cycling behavior of bi-layer Yb2Si2O7/SiC EBC-coated Cf/SiC composites in burner rig tests

Ytterbium Disilicate/Monosilicate Multilayer Environmental Barrier Coatings: Influence of Atmospheric Plasma Spray Parameters on Composition and Microstructure

Thermal Shock Damage and Failure Mechanism of 2D Laminated SiC/SiC with Barium‐Strontium Aluminosilicate‐Based Environmental Barrier Coating

Thermal durability of ytterbium silicate environmental barrier coating prepared by suspension plasma spray

High-temperature mechanical properties and oxidation resistance of SiCf/SiC ceramic matrix composites with multi-layer environmental barrier coatings for turbine applications

Microstructural evolution and corrosion mechanism of thermal/environmental barrier coatings against molten calcium–magnesium–alumino–silicate