Abstract:Accurate fault location reduces operating cost and outage time. This paper proposes a time-domain method to accurately locate faults in transmission lines, which only requires a very short data window (several milli-seconds) during faults. First, the voltage distribution through the line during faults is accurately obtained by solving the matrix form partial differential equations using the proposed numerical scheme. The proposed numerical scheme is mathematically validated for the transmission line fault location problem, with the optimal selection of time and distance intervals to ensure stability and minimum solution error. Afterwards, the fault location is obtained via the extremum value of the voltage distribution. The method fully considers distributed parameters as well as asymmetry of the line. Extensive numerical experiments validated that (a) the proposed numerical scheme demonstrates advantages towards other numerical schemes; (b) the proposed method presents higher fault location accuracy compared to the existing method, independent of fault types, locations and impedances; and (c) the fault location accuracy is not sensitive towards fault inception angles, loading conditions, measurement errors and parameter errors. The proposed method works with relatively low sampling rates (80 samples per cycle) and is compatible with IEC 61850 standard in present digital substations.

Time‐domain single‐ended fault location method that does not need remote‐end system information

A novel noniterative single-ended fault location method with distributed parameter model for AC transmission lines

A Novel Single-Ended Fault Location Method for Locating Double-Phase to Earth Faults

Time-Domain Transmission Line Fault Location Method With Full Consideration of Distributed Parameters and Line Asymmetry

A Two-Terminal Fault Location Algorithm Using Asynchronous Phasors Based on Distributed Parameter Model

Fault Location for HV Three-terminal Transmission Lines

New Fault Location Method for HV T-connection. Transmission Lines

Novel Fault Locating Method Based on Synchronized Voltage Phasor

Fault Locating Algorithm for T-type Transmission Lines with Asynchronous Sampling

A Novel Current Travelling Wave Based Single-Ended Fault Location Method for Locating Single-Phase-to-ground Fault of Transmission Line

Fault Location Algorithm for HV Transmission Lines Immune to Saturation of Current Transformers

Research on a New Single-End Fault Location Method for Single-Phase Grounding Faults of Transmission Lines Through Transition Resistance

Eliminating the Dependence of GPS or Communication Latency Estimation in Traveling Wave Based Double-Terminal Fault Location

Modified Single-Ended Fault Location Method for Single-phase-to-Ground Faults in T-Connected Line

Transmission Line Fault Location Based on Improved Algorithm of Electromagnetic Time Reversal

Flexible Noncontact Approach for Fault Location of Transmission Lines Using Electro-Optic Field Sensors

Single-ended Assembled Fault Location Method and Application Considering Secondary Circuit Transfer Characteristics

Sequential Data-Based Fault Location for Single-Line-to-Ground Fault in a T-Connection Power Line

Fault Location Based on Synchronous Data of Both Ends in Non-effectively Grounded System

Optimizing Solution of Fault Location Using Single Terminal Quantities

A Fault Location Method Based on Electromagnetic Transient Convolution Considering Frequency-Dependent Parameters and Lossy Ground