Abstract:Additive manufacturing (AM) is known to generate large magnitudes of residual stresses (RS) within builds due to steep and localized thermal gradients. In the current state of commercial AM technology, manufacturers generally perform heat treatments in effort to reduce the generated RS and its detrimental effects on part distortion and in-service failure. Computational models that effectively simulate the deposition process can provide valuable insights to improve RS distributions. Accordingly, it is common to employ Computational fluid dynamics (CFD) models or finite element (FE) models. While CFD can predict geometric and thermal-fluid behavior, it cannot predict the structural response (e.g., stress–strain) behavior. On the other hand, an FE model can predict mechanical behavior, but it lacks the ability to predict geometric and fluid behavior. Thus, an effectively integrated thermofluidic-thermomechanical modeling framework that exploits the benefits of both techniques while avoiding their respective limitations can offer valuable predictive capability for AM processes. In contrast to previously published efforts, the work herein describes a one-way coupled CFD-FEA framework that abandons major simplifying assumptions, such as geometric steady-state conditions, the absence of material plasticity, and the lack of detailed RS evolution/accumulation during deposition, as well as insufficient validation of results. The presented framework is demonstrated for a directed energy deposition (DED) process, and experiments are performed to validate the predicted geometry and RS profile. Both single- and double-layer stainless steel 316L builds are considered. Geometric data is acquired via 3D optical surface scans and X-ray micro-computed tomography, and residual stress is measured using neutron diffraction (ND). Comparisons between the simulations and measurements reveal that the described CFD-FEA framework is effective in capturing the coupled thermomechanical and thermofluidic behaviors of the DED process. The methodology presented is extensible to other metal AM processes, including power bed fusion and wire-feed-based AM.

A High-Fidelity Thermal Model for a Novel Droplet-Based Additive Manufacturing Process for Polymers

Heat Transfer and Adhesion Study for the FFF Additive Manufacturing Process

Radiative Thermal Effects in Large Scale Additive Manufacturing of Polymers: Numerical and Experimental Investigations

Thermal analysis of fused deposition modeling process based finite element method: Simulation and parametric study

Finite Difference Modeling and Experimental Investigation of Cyclic Thermal Heating in the Fused Filament Fabrication Process

A thermo-chemo-mechanical model for material extrusion of frontally polymerizing thermoset polymers

A versatile SPH modeling framework for coupled microfluid-powder dynamics in additive manufacturing: binder jetting, material jetting, directed energy deposition and powder bed fusion

Temporally continuous thermofluidic-thermomechanical modeling framework for metal additive manufacturing

Mathematical Model of the Layer-by-Layer FFF/FGF Polymer Extrusion Process for Use in the Algorithm of Numerical Implementation of Real-Time Thermal Cycle Control

Multiphysics modelling of powder bed fusion for polymers

A novel smoothed particle hydrodynamics formulation for thermo-capillary phase change problems with focus on metal additive manufacturing melt pool modeling

Process-informed simulation of Big-Area Additive Manufacturing (BAAM) of polymers

Simulation of large-scale additive manufacturing process with a single-phase level set method: a process parameters study

Experimental Validation of Numerical Model for Thermomechanical Performance of Material Extrusion Additive Manufacturing Process: Effect of Process Parameters

Multi-scale modeling and simulation of additive manufacturing based on fused deposition technique

Efficient thermal simulation of large-scale metal additive manufacturing using hot element addition

Effect of Thermal Deformation on Part Errors in Metal Powder Based Additive Manufacturing Processes

In situ X-ray diffraction and thermal simulation of material extrusion additive manufacturing of polymer

Insights into Temperature Simulation and Validation of Fused Deposition Modeling Processes

Validation of a Finite Element Model for Fused Filament Fabrication Additive Manufacturing

Numerical Investigation of Thermocapillary-Induced Deposited Shape in Fused-Coating Additive Manufacturing Process of Aluminum Alloy