Abstract:A new efficient numerical technique has been formulated for dimensional reduction and phenomenological multi-scale simulation of additive manufacturing processes using finite element analysis. This technique is demonstrated using prismatic build volumes to represent the Selective Laser Melting powder bed fusion additive manufacturing process. The Eigen modes determined as an outcome of implementation of this technique will help to reduce the time necessary for optimization of process parameters and closed loop control. In addition to thermal simulations of the Selective Laser Melting process, this technique is also applicable to the simulation of lattice structures, layered materials such as ultrasonically consolidated laminates, thin walled coatings and development of high fidelity beam and plate theories for parts made using additive manufacturing processes. A future integration of this method with analytical Eigen wavelets will provide infinite support compared to finite support provided by directional polynomial shape functions currently used for implementation of finite element strategies. The present Eigen modes will be also useful in analysis and optimization of mask projection based additive manufacturing processes. Introduction Additive manufacturing has been on the forefront of innovations in engineering and has immense potential to revolutionize manufacturing. The major factors that are critical to any manufacturing technology are geometrical accuracy, mechanical properties of the produced part and process speed. These factors are important for additive manufacturing processes as well and improvement in any of these areas can lead to better optimized and reduced cost products. Process optimization based on these factors requires a good understanding of the physics and process behavior involved. The process behavior includes variation of mechanical and thermal variables across the part domain. Process behavior also depends on the part geometry and machine parameters. Simulations can help achieve real time optimization of process parameters and closed loop control. However, real time optimization requires fast simulations to be able to work at the speed of the machine. In the present work a new fast and memory efficient numerical solver for the Finite Element Method (FEM) is presented for processes involving prismatic process domains including, for instance, the full powder bed in the case of Selective Laser Melting. Selective Laser Melting SLM is an important additive manufacturing process in which a laser beam selectively melts a powder bed layerby-layer to build a complex three dimensional geometry (see Figure 1). SLM has found many applications in complex aerospace parts and biomedical implants. The accuracy and microstructure of the parts manufactured in the process can be improved with better control of machine input parameters. Input parameters for SLM include beam power, scan speed, hatch pattern, recoat time and powder layer thickness. Optimization of beam power, scan speed and hatch pattern, in particular, affect the thermal behavior of the powder bed and the melt pool shape. The Melt pool shape has a significant impact on the final geometry of the built part. The thermal behavior of the full powder bed is also important from the perspective of thermal cooling rates during solidification, which determines the microstructures and phases in the final part. A detailed literature review of this area has been performed [1]. A recently developed multi-scale simulation framework known as Feed Forward Adaptive Mesh Refinement and De-refinement (FFD-AMRD) [2,3] is used in the present work for various simulations and is also used as a part of the proposed simulation framework.

Simulation of large-scale additive manufacturing process with a single-phase level set method: a process parameters study

Numerical simulation of filling flow of polymer melt in injection molding

Radiative Thermal Effects in Large Scale Additive Manufacturing of Polymers: Numerical and Experimental Investigations

Simulation of Fiber-Induced Melt Pressure Fluctuations within Large Scale Polymer Composite Deposition Beads

Multi-scale modeling and simulation of additive manufacturing based on fused deposition technique

A High-Fidelity Thermal Model for a Novel Droplet-Based Additive Manufacturing Process for Polymers

3D Non-Newtonian deposition flow and thermal simulations to evaluate the scale-up potential for material extrusion of single walled ABS parts with overhang

Crystallisation Dynamics in Large-Scale Extrusion Additive Manufacturing: An Analysis with and without Temperature Modification

Simulation of melt pool dynamics including vaporization using the particle finite element method

Process-informed simulation of Big-Area Additive Manufacturing (BAAM) of polymers

Effects of printed bead volume on thermal history, polymer degree of crystallinity and mechanical properties in large scale additive manufacturing.

A New Finite Element Solver using Numerical Eigen Modes for Fast Simulation of Additive Manufacturing Processes

Variational multi-scale finite element method for the two-phase flow of polymer melt filling process

Numerical Simulation and Analysis of Metal Fused Coating Forming

A versatile SPH modeling framework for coupled microfluid-powder dynamics in additive manufacturing: binder jetting, material jetting, directed energy deposition and powder bed fusion

Heat Transfer and Adhesion Study for the FFF Additive Manufacturing Process

Powder-scale Multi-Physics Modeling of Multi-Layer Multi-Track Selective Laser Melting with Sharp Interface Capturing Method

Efficient simulation of the heat transfer in fused filament fabrication

Computational analysis of yield stress buildup and stability of deposited layers in material extrusion additive manufacturing

Numerical Simulation Development and Computational Optimization for Directed Energy Deposition Additive Manufacturing Process

Two-level method part-scale thermal analysis of laser powder bed fusion additive manufacturing