Abstract:Abstract Electrofusion joint is a principal connection method within non-metallic pipeline systems, and the mechanical strength of electrofusion joints is of great importance to achieve safe operation of pipeline systems. By manufacturing the electrofusion joints with short carbon fiber reinforced thermoplastic composites (SCFRTCs), the mechanical strength of electrofusion joints has been significantly improved, which shows great potential in mechanical enhancement of electrofusion joints. However, due to inherent stress concentrations within the joint structure and the limited ductility characteristic of SCFRTCs, SCFRTCs electrofusion joints are prone to crack propagation failure. Elucidating the failure mechanics of SCFRTCs electrofusion joints is vital for their continuous refinement and the secure operation of pipeline systems. In this study, SCFRTCs were first prepared and their fundamental mechanical properties were investigated. Subsequently, electrofusion joints were manufactured by SCFRTCs. A finite element models, combined with contour integral method, was developed to ascertain the crack propagation failure mode of SCFRTCs electrofusion joints. The influence of yield strength of SCFRTCs and wall thickness of joints on crack initiation of SCFRTCs electrofusion joints were systematically analyzed. The results demonstrated that the stress level in most areas along the wall thickness is low when the crack in the joint initiates. Increase in joint wall thickness and material yield strength can improve the internal pressure of crack initiation, but the utilization rate of materials strength decreases gradually. Additionally, short-term bursting tests of SCFRTCs electrofusion joints were conducted to determine the bursting pressures of electrofusion joints with varying wall thicknesses. By analyzing the crack morphology on the cross-sections of the bursting joints, it is found that after crack initiation, the crack is driven by internal pressure and gradually propagates until the joint fails. The results of this study can provide reference for the design and application of SCFRTCs electrofusion joints.

Comparative Investigation on Step-cycle Tensile Behaviors of Two Bimodal Pipe-grade Polyethylene with Different Slow Crack Growth Resistance

Viscoelastic and Damage Model of Polyethylene Pipe Material for Slow Crack Growth Analysis

Study on Viscoelastic Behavior During Slow Crack Growth of Medium Density Polyethylene Pipes

Investigation on Crack Propagation Failure Modes of Short Carbon Fiber Reinforced Polyethylene Electrofusion Joints

Investigation on Failure Mode of Short Carbon Fiber Reinforced Thermoplastic Composites Joints of Non-metallic Pipeline

Effect of Butt Fusion Welding Beads on Tensile Properties of Polyethylene Pipes

Short-Term Mechanical Analysis of Polyethylene Pipe Reinforced by Winding Steel Wires Using Steel Wire Spiral Structural Finite Element Model

The Effect of Branched Structure on the Lamellae Evolution under Uniaxial Extension and SCG Resistance of Polyolefins

Mechanism of Slow Crack Growth in Polyethylene: A Finite Element Approach

Effect of Short Chain Branches Distribution on Fracture Behavior of Polyethylene Pipe Resins

Comparison of Mechanical Properties Between PE80 and PE100 Pipe Materials

Short Chain Branches Distribution Characterization of Ethylene/1‐Hexene Copolymers by Using TREF + 13C‐NMR and TREF + SC Methods

CCG of PE100 and Life Prediction of PE Pipe With Axial Semi-Elliptical Crack

Design of molecular structure for commercial polyethylene100 pipe

Structure and properties of monomodal PE100 for pipes

Molecular Mobility in the Amorphous Phase Determines the Critical Strain of Fibrillation in the Tensile Stretching of Polyethylene

Strain Rate-Dependent Hyperbolic Constitutive Model for Tensile Behavior of PE100 Pipe Material

Role of Melt Plasticizing Temperature in Morphology and Properties of PE100 Pipes Prepared by a Rotational Shear System

Investigations of the Structure and Property Relationship of PE100 Pipe Materials by Solid State NMR Techniques

Stretch-induced structural transition of linear low-density polyethylene during uniaxial stretching under different strain rates

Structure Evolution of Polyethylene in Sequential Biaxial Stretching along the First Tensile Direction