Abstract:Bimetallic CoCu model catalysts were investigated for the synthesis of higher alcohols using catalytic CO hydrogenation according to the Fischer–Tropsch technology. Emphasis was placed on revealing the influence of the activation conditions. Accordingly, catalyst precursors were activated in argon, hydrogen, syngas (CO/H2), and CO under atmospheric conditions and at elevated temperatures (370 °C). All catalyst precursors were prepared via oxalate coprecipitation in the absence of a classic support. Alcohol selectivities between 30 and ∼40% (up to ∼50% for the sum of alcohols and alkenes) were obtained with an Anderson–Schulz–Flory (ASF) chain lengthening probability maximizing the slate up to C6. Detailed catalysis and characterization studies were performed using a Co2Cu1 catalyst composition. The catalytic performances of the H2- and syngas-activated Co2Cu1 catalyst were similar. While the CO-activated catalyst shows significantly higher catalytic activity and ASF chain lengthening probability, the alcohol selectivities are lower than those of H2- or syngas-activated ones. All catalysts required time on stream for several hours to achieve steady-state catalytic performance. Co2Cu1 catalysts were characterized by temperature-programmed decomposition (TPDec), in situ N2 physisorption (Brunauer–Emmett–Teller), transmission electron microscopy (TEM), and in situ X-ray photoelectron spectroscopy (XPS). The data indicate major restructuring occurs during activation. An “onion-like” graphitic carbon shell was observed via TEM for the CO-activated Co2Cu1 catalyst, which probably originated mainly from the Boudouard reaction (2CO + [ ]ad → Cad + CO2). This interpretation is in accordance with the TPDec profiles and XPS results. The latter also indicates that syngas and CO activation lead to higher than nominal Co/Cu surface ratios. The surface segregation of Co in the presence of CO atmospheres is interpreted on the basis of Co@Cu core–shell structured particles.

Structural evolution of bimetallic Co-Cu catalysts in CO hydrogenation to higher alcohols at high pressure

The steady-state kinetics of CO hydrogenation to higher alcohols over a bulk Co-Cu catalyst

Higher Alcohols through CO Hydrogenation over CoCu Catalysts: Influence of Precursor Activation

Using CoCu 2 Ga/SiO 2 to identify stability-issues in ethanol-selective Co-Cu alloyed catalysts in carbon monoxide hydrogenation

Insight into the structural sensitivity of CuZnAl catalysts for CO hydrogenation to alcohols

Synergy between Active Sites of Ternary CuZnAlOOH Catalysts in CO Hydrogenation to Ethanol and Higher Alcohols

High‐pressure CO, H2, CO2 and ethylene pulses applied in the hydrogenation of CO to higher alcohols over a bulk Co‐Cu catalyst

Development Of Copper-Cobalt Based Catalysts For Higher Alcohol Synthesis From Co2 And H-2

Accelerating C2+ Alcohols Synthesis from Syngas by Simultaneous Optimizations of CO Dissociation and Chain Growth over CuCo Alloy Catalyst

Elucidating the Copper–Hägg Iron Carbide Synergistic Interactions for Selective CO Hydrogenation to Higher Alcohols

Co Hydrogenation to Ethanol and Higher Alcohols Over Ultrathin Cucoal Nanosheets Derived from Ldh Precursor

Effect of the promoter and support on cobalt-based catalysts for higher alcohols synthesis through CO hydrogenation

Synthesis of Higher Alcohols from CO 2 Hydrogenation over Mo–Co–K Sulfide-Based Catalysts

Recent Progress in CO Hydrogenation over Bimetallic Catalysts for Higher Alcohol Synthesis

Perovskite-derived trimetallic Co-Ni-Cu catalyst for higher alcohol synthesis from syngas

Copper‐cobalt bimetallic nanoparticles for the acceptorless dehydrogenation of alcohols: a combined experimental and theoretical study.

Bimetallic Ni–Co catalysts supported on Mn–Al oxide for selective catalytic CO hydrogenation to higher alcohols

Effect of KCoMoS2 Catalyst Structures on the Catalytic Performance of Higher Alcohols Synthesis via CO Hydrogenation

Ethanol and Higher Alcohols Synthesis from Syngas over CuCoM (m=fe, Cr, Ga and Al) Nanoplates Derived from Hydrotalcite‐Like Precursors