Abstract:Cu-based catalysts are widely employed for CO or CO2 hydrogenation into methanol. However, their catalytic performance highly depends on supports, and the real evolution of Cu species is still covered by active components. Herein, we supply a Cu/SiO2 catalyst prepared by flame spray pyrolysis (FSP), showing catalytic performance comparable to that of the active Cu/ZrO2 catalyst for methanol synthesis from CO2. It reaches 79% selectivity at a CO2 conversion of 5.2%, which is an outstanding selectivity among previously reported Cu/SiO2 catalysts, considering they are generally treated as nearly inert catalysts. In situ X-ray absorption spectroscopy (XAS) analysis shows that 5 times more Cu+ species in the FSP-Cu/SiO2 are stabilized in comparison to those in the traditional ammonia evaporation (AE) made catalyst even after reduction at 350 °C. A unique shattuckite-like precursor with a slightly distorted Cu–O–Si texture structure formed in the FSP-made catalyst is responsible for the enriched Cu+ species. Variations of intermediate formation and methanol production are found to have a good relationship with the amount of Cu+ species. According to the results of high-pressure in situ DRIFTS, we attribute this to the promotional effect of Cu+ on the stabilization of CO* intermediates, which inhibits CO desorption and facilitates further hydrogenation to CH3OH via the RWGS + CO-Hydro pathway. These results bring insights into the Cu reduction behavior and the function of Cu+ species during methanol production on Cu-based catalysts without the assistance of active supports.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c04371?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c04371</a>.Catalytic performances, FTIR, TEM, XRD, XAS, CO-IR, CO-TPD, in situ DRIFTS and catalyst structure (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c04371/suppl_file/cs0c04371_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Using CoCu 2 Ga/SiO 2 to identify stability-issues in ethanol-selective Co-Cu alloyed catalysts in carbon monoxide hydrogenation

Theoretical Investigation on the CO2 Hydrogenation to Methanol Mechanism at Electron-Rich Active Interface over Cu/Ga-Ti-Al-O Catalyst

Synergy between Active Sites of Ternary CuZnAlOOH Catalysts in CO Hydrogenation to Ethanol and Higher Alcohols

Ethanol and Higher Alcohols Synthesis from Syngas over CuCoM (m=fe, Cr, Ga and Al) Nanoplates Derived from Hydrotalcite‐Like Precursors

Structural evolution of bimetallic Co-Cu catalysts in CO hydrogenation to higher alcohols at high pressure

Design and Synthesis of Spherical-Platelike Ternary Copper-Cobalt-manganese Catalysts for Direct Conversion of Syngas to Ethanol and Higher Alcohols

Insight into the structural sensitivity of CuZnAl catalysts for CO hydrogenation to alcohols

Selective Hydrogenation of CO2 to Ethanol over Cobalt Catalysts

Tailored design of novel Co0-Coδ+ dual phase nanoparticles for selective CO2 hydrogenation to ethanol

Elucidating the Copper–Hägg Iron Carbide Synergistic Interactions for Selective CO Hydrogenation to Higher Alcohols

Moderate Surface Segregation Promotes Selective Ethanol Production in CO2 Hydrogenation Reaction over CoCu Catalysts

Higher Alcohols through CO Hydrogenation over CoCu Catalysts: Influence of Precursor Activation

Ternary Cobalt–Copper–Niobium Catalysts for the Selective CO Hydrogenation to Higher Alcohols

A Study on the Binary and Ternary CuZnAl Catalysts without Additives for Efficient CO Hydrogenation to Ethanol

Cobalt–Nickel Catalysts for Selective Hydrogenation of Carbon Dioxide into Ethanol

Stabilizing Cu + in Cu/SiO 2 Catalysts with a Shattuckite-Like Structure Boosts CO 2 Hydrogenation into Methanol

CuZnAl@S-1 Catalyst for the Synthesis of Higher Alcohols by CO Hydrogenation

Syngas conversion to higher alcohols via wood-framed Cu/Co-carbon catalyst

Effect of Hydroxyl Groups on CuCoMg Nanosheets for Ethanol and Higher Alcohol Synthesis from Syngas