Abstract:Bimetallic CoCu model catalysts were investigated for the synthesis of higher alcohols using catalytic CO hydrogenation according to the Fischer–Tropsch technology. Emphasis was placed on revealing the influence of the activation conditions. Accordingly, catalyst precursors were activated in argon, hydrogen, syngas (CO/H2), and CO under atmospheric conditions and at elevated temperatures (370 °C). All catalyst precursors were prepared via oxalate coprecipitation in the absence of a classic support. Alcohol selectivities between 30 and ∼40% (up to ∼50% for the sum of alcohols and alkenes) were obtained with an Anderson–Schulz–Flory (ASF) chain lengthening probability maximizing the slate up to C6. Detailed catalysis and characterization studies were performed using a Co2Cu1 catalyst composition. The catalytic performances of the H2- and syngas-activated Co2Cu1 catalyst were similar. While the CO-activated catalyst shows significantly higher catalytic activity and ASF chain lengthening probability, the alcohol selectivities are lower than those of H2- or syngas-activated ones. All catalysts required time on stream for several hours to achieve steady-state catalytic performance. Co2Cu1 catalysts were characterized by temperature-programmed decomposition (TPDec), in situ N2 physisorption (Brunauer–Emmett–Teller), transmission electron microscopy (TEM), and in situ X-ray photoelectron spectroscopy (XPS). The data indicate major restructuring occurs during activation. An “onion-like” graphitic carbon shell was observed via TEM for the CO-activated Co2Cu1 catalyst, which probably originated mainly from the Boudouard reaction (2CO + [ ]ad → Cad + CO2). This interpretation is in accordance with the TPDec profiles and XPS results. The latter also indicates that syngas and CO activation lead to higher than nominal Co/Cu surface ratios. The surface segregation of Co in the presence of CO atmospheres is interpreted on the basis of Co@Cu core–shell structured particles.

The steady-state kinetics of CO hydrogenation to higher alcohols over a bulk Co-Cu catalyst

Structural evolution of bimetallic Co-Cu catalysts in CO hydrogenation to higher alcohols at high pressure

Higher Alcohols through CO Hydrogenation over CoCu Catalysts: Influence of Precursor Activation

Higher Alcohols Synthesis from Syngas over Cocu/Sio2 Catalysts: Dynamic Structure and the Role of Cu

Synergy between Active Sites of Ternary CuZnAlOOH Catalysts in CO Hydrogenation to Ethanol and Higher Alcohols

Accelerating C2+ Alcohols Synthesis from Syngas by Simultaneous Optimizations of CO Dissociation and Chain Growth over CuCo Alloy Catalyst

High‐pressure CO, H2, CO2 and ethylene pulses applied in the hydrogenation of CO to higher alcohols over a bulk Co‐Cu catalyst

Recent Progress in CO Hydrogenation over Bimetallic Catalysts for Higher Alcohol Synthesis

Carbon–Carbon Bond Formation Pathways in CO Hydrogenation to Higher Alcohols

Using CoCu 2 Ga/SiO 2 to identify stability-issues in ethanol-selective Co-Cu alloyed catalysts in carbon monoxide hydrogenation

Revealing and Regulating the Complex Reaction Mechanism of CO 2 Hydrogenation to Higher Alcohols on Multifunctional Tandem Catalysts

Effect of the promoter and support on cobalt-based catalysts for higher alcohols synthesis through CO hydrogenation

Synthesis of Higher Alcohols from CO 2 Hydrogenation over Mo–Co–K Sulfide-Based Catalysts

Development Of Copper-Cobalt Based Catalysts For Higher Alcohol Synthesis From Co2 And H-2

Theoretical investigation of the selectivity of alcohols and aldehydes on Co-based catalysts in syngas conversion

The Selectivity and Activity of Catalyst for Co Hydrogenation to Methanol and Hydrocarbon: A Comparative Study on Cu, Co and Ni Surfaces

Synthesis of mixed higher alcohols over Fe promoted Cu/ZrO2 catalysts by CO hydrogenation

Insight into the structural sensitivity of CuZnAl catalysts for CO hydrogenation to alcohols

Direct Conversion of Syngas to Higher Alcohols over Multifunctional Catalyst: The Role of Copper-Based Component and Catalytic Mechanism