Abstract:Bimetallic CoCu model catalysts were investigated for the synthesis of higher alcohols using catalytic CO hydrogenation according to the Fischer–Tropsch technology. Emphasis was placed on revealing the influence of the activation conditions. Accordingly, catalyst precursors were activated in argon, hydrogen, syngas (CO/H2), and CO under atmospheric conditions and at elevated temperatures (370 °C). All catalyst precursors were prepared via oxalate coprecipitation in the absence of a classic support. Alcohol selectivities between 30 and ∼40% (up to ∼50% for the sum of alcohols and alkenes) were obtained with an Anderson–Schulz–Flory (ASF) chain lengthening probability maximizing the slate up to C6. Detailed catalysis and characterization studies were performed using a Co2Cu1 catalyst composition. The catalytic performances of the H2- and syngas-activated Co2Cu1 catalyst were similar. While the CO-activated catalyst shows significantly higher catalytic activity and ASF chain lengthening probability, the alcohol selectivities are lower than those of H2- or syngas-activated ones. All catalysts required time on stream for several hours to achieve steady-state catalytic performance. Co2Cu1 catalysts were characterized by temperature-programmed decomposition (TPDec), in situ N2 physisorption (Brunauer–Emmett–Teller), transmission electron microscopy (TEM), and in situ X-ray photoelectron spectroscopy (XPS). The data indicate major restructuring occurs during activation. An “onion-like” graphitic carbon shell was observed via TEM for the CO-activated Co2Cu1 catalyst, which probably originated mainly from the Boudouard reaction (2CO + [ ]ad → Cad + CO2). This interpretation is in accordance with the TPDec profiles and XPS results. The latter also indicates that syngas and CO activation lead to higher than nominal Co/Cu surface ratios. The surface segregation of Co in the presence of CO atmospheres is interpreted on the basis of Co@Cu core–shell structured particles.

Synthesis of mixed higher alcohols over Fe promoted Cu/ZrO2 catalysts by CO hydrogenation

Strong Cu/ZnO Interfacial Interaction Induced by ZrO2 Promoter Suppressing the Ethanol Formation in Industrial Methanol Synthesis

Synthesis Of Higher Alcohol Mixtures From Syngas Over Modified Copper Catalysts

Fe/CuZnSi catalysts for synthesis of mixed alcohols

Study of Cu-Fe-Co-M/SiO<sub>2</sub> (M = Unpromoted, Li, Na, K and Cs) Catalysts for Mixed Alcohols Synthesis from CO Hydrogenation

Study of Cu-Fe-Co-M/SiO2 (M = Unpromoted, Li, Na, K and Cs) Catalysts for Mixed Alcohols Synthesis from CO Hydrogenation

The synthesis of higher alcohols from CO2 hydrogenation over Mn-Cu-K modified Fe5C2 and CuZnAlZr tandem catalysts

Elucidating the Copper–Hägg Iron Carbide Synergistic Interactions for Selective CO Hydrogenation to Higher Alcohols

Tuning the selectivity of CO2 hydrogenation to alcohols by crystal structure engineering

A highly efficient Cu/ZnOx/ZrO2 catalyst for selective CO2 hydrogenation to methanol

Influence of Co Modified Mn/Cu/MgO Catalyst on the Synthesis of Mixed Alcohols from Syngas

Effect of iron on ZrO2-based catalysts for direct synthesis of isobutanol from syngas

Higher Alcohols through CO Hydrogenation over CoCu Catalysts: Influence of Precursor Activation

CuZnAl@S-1 Catalyst for the Synthesis of Higher Alcohols by CO Hydrogenation

Inverse ZrO2/Cu as a highly efficient methanol synthesis catalyst from CO2 hydrogenation

Dual active sites over Cu-ZnO-ZrO2 catalysts for carbon dioxide hydrogenation to methanol

Insight into the structural sensitivity of CuZnAl catalysts for CO hydrogenation to alcohols

Synthesis of Liquid Hydrocarbon via Direct Hydrogenation of CO2 over FeCu-Based Bifunctional Catalyst Derived from Layered Double Hydroxides

Modulation of Al2O3 and ZrO2 composite in Cu/ZnO-based catalysts with enhanced performance for CO2 hydrogenation to methanol

Influence of Manganese Promoter on Co-Precipitated Fe–Cu Based Catalysts for Higher Alcohols Synthesis