Abstract:Bimetallic CoCu model catalysts were investigated for the synthesis of higher alcohols using catalytic CO hydrogenation according to the Fischer–Tropsch technology. Emphasis was placed on revealing the influence of the activation conditions. Accordingly, catalyst precursors were activated in argon, hydrogen, syngas (CO/H2), and CO under atmospheric conditions and at elevated temperatures (370 °C). All catalyst precursors were prepared via oxalate coprecipitation in the absence of a classic support. Alcohol selectivities between 30 and ∼40% (up to ∼50% for the sum of alcohols and alkenes) were obtained with an Anderson–Schulz–Flory (ASF) chain lengthening probability maximizing the slate up to C6. Detailed catalysis and characterization studies were performed using a Co2Cu1 catalyst composition. The catalytic performances of the H2- and syngas-activated Co2Cu1 catalyst were similar. While the CO-activated catalyst shows significantly higher catalytic activity and ASF chain lengthening probability, the alcohol selectivities are lower than those of H2- or syngas-activated ones. All catalysts required time on stream for several hours to achieve steady-state catalytic performance. Co2Cu1 catalysts were characterized by temperature-programmed decomposition (TPDec), in situ N2 physisorption (Brunauer–Emmett–Teller), transmission electron microscopy (TEM), and in situ X-ray photoelectron spectroscopy (XPS). The data indicate major restructuring occurs during activation. An “onion-like” graphitic carbon shell was observed via TEM for the CO-activated Co2Cu1 catalyst, which probably originated mainly from the Boudouard reaction (2CO + [ ]ad → Cad + CO2). This interpretation is in accordance with the TPDec profiles and XPS results. The latter also indicates that syngas and CO activation lead to higher than nominal Co/Cu surface ratios. The surface segregation of Co in the presence of CO atmospheres is interpreted on the basis of Co@Cu core–shell structured particles.

High‐pressure CO, H2, CO2 and ethylene pulses applied in the hydrogenation of CO to higher alcohols over a bulk Co‐Cu catalyst

Higher Alcohols through CO Hydrogenation over CoCu Catalysts: Influence of Precursor Activation

Structural evolution of bimetallic Co-Cu catalysts in CO hydrogenation to higher alcohols at high pressure

Theoretical Investigation on the CO2 Hydrogenation to Methanol Mechanism at Electron-Rich Active Interface over Cu/Ga-Ti-Al-O Catalyst

The steady-state kinetics of CO hydrogenation to higher alcohols over a bulk Co-Cu catalyst

Higher Alcohols Synthesis from Syngas over Cocu/Sio2 Catalysts: Dynamic Structure and the Role of Cu

Using CoCu 2 Ga/SiO 2 to identify stability-issues in ethanol-selective Co-Cu alloyed catalysts in carbon monoxide hydrogenation

Co-Co2c and Co-Co2c/Ac Catalysts for Hydroformylation of 1-Hexene under Low Pressure: Experimental and Theoretical Studies

Selective Hydrogenation of CO2 to Ethanol over Cobalt Catalysts

Effect of the promoter and support on cobalt-based catalysts for higher alcohols synthesis through CO hydrogenation

Formation of C-C and C-O bonds and oxygen removal in reactions of alkanediols, alkanols, and alkanals on copper catalysts

Synthesis of tetrahedrally coordinated CoO for higher alcohol synthesis directly from syngas

Enhancing Ethanol Coupling to Produce Higher Alcohols by Tuning H 2 Partial Pressure over a Copper-Hydroxyapatite Catalyst

Synthesis Of Higher Alcohol Mixtures From Syngas Over Modified Copper Catalysts

Synthesis of Higher Alcohols from CO 2 Hydrogenation over Mo–Co–K Sulfide-Based Catalysts

Elucidating the Copper–Hägg Iron Carbide Synergistic Interactions for Selective CO Hydrogenation to Higher Alcohols

Synergy between Active Sites of Ternary CuZnAlOOH Catalysts in CO Hydrogenation to Ethanol and Higher Alcohols

Direct Conversion of CO2 into Alcohols Using Cu-Based Zeolite Catalysts

Recent Progress in CO Hydrogenation over Bimetallic Catalysts for Higher Alcohol Synthesis