Abstract:This work presents two scalable manufacturing methods of near‐infrared metalenses. The first method produces a 1 cm diameter, 0.53 numerical aperture (NA) polarization‐independent metalens with hydrogenated amorphous silicon. The second method creates a 5 mm diameter, 0.53 NA polarization‐dependent metalens with silicon nanoparticle‐embedded‐resin. Both metalenses exhibit high‐resolution imaging capabilities, making significant progress in metalens production and further metaphotonics technology. Metalenses have revolutionized optical technologies with their superior ability to manipulate light and the potential to replace conventional, bulky optical components. However, their commercialization is hindered by limitations in conventional manufacturing techniques, such as small patterning areas, low throughput, and high cost. In this study, two methods are introduced for scalable and wafer‐scale manufacturing of metalenses operating in the near‐infrared region, aimed at overcoming the abovementioned challenges. The first type of metalens is polarization‐independent and constructed using hydrogenated amorphous silicon cylindrical structures fabricated through direct photolithography. This metalens has a diameter of 1 cm and numerical aperture (NA) of 0.53. The focusing efficiency is confirmed at a 940 nm wavelength, and the focal spot profile approaches the diffraction limit. The second metalens is polarization‐dependent and fabricated using silicon nanoparticle‐embedded‐resin rectangular structures through a cost‐effective nanoimprinting method. This process can produce metalenses with a diameter of 5 mm and an NA of 0.53. Both types of metalenses demonstrate high‐resolution capabilities when imaging a 1951 USAF resolution test target and bioimaging. This research offers innovative pathways for the mass production and large‐scale fabrication of metalenses. It is believed that the work will accelerate the industrialization of metalenses, fostering further advances in optical technology.

CMOS-compatible a-Si metalenses on a 12-inch glass wafer for fingerprint imaging

Metalens-integrated Compact Imaging Devices for Wide-Field Microscopy

Fast and Efficient Inverse Design Framework for Multifunctional Metalenses

Long-infrared Dual-Wavelength Linear-Polarization-multiplexed Confocal Metalens Based on an All-Silicon Dielectric

Ultra-thin, Zoom Capable, Flexible Metalenses with High Focusing Efficiency and Large Numerical Aperture

Off-chip Far-field Focusing with Annular Coupling Gratings

Wafer‐Scale Manufacturing of Near‐Infrared Metalenses

Synthetic Aperture Metalens

8′′ wafer-scale, centimeter-sized, high-efficiency metalenses in the ultraviolet

On-chip Monolithic Wide-Angle Field-of-view Metalens Based on Quadratic Phase Profile

Planar Metalenses in the Mid-Infrared

Focusing Characteristics and Widefield Imaging Performance of the Silicon Metalens in the Visible Range

A Metalens Design for On- and Off-Center Focusing with Amorphous Silicon Hydrogenated (a-Si:H)-Based 1D Array in Visible Spectrum

Masses of metalenses

Chip-scale Metalens Microscope for Wide-Field and Depth-of-field Imaging

A broadband achromatic metalens for focusing and imaging in the visible

Broadband achromatic thermal metalens with a wide field of view based on wafer-level monolithic processes

Longitudinal tri-foci Metalens empowered multiple-magnification and diffraction-limited microscope

A wide-field-of-view metalens array for CMOS image sensors' conical light focusing

High-efficiency, 80-mm aperture metalens telescope

Doublet Metalens with Simultaneous Chromatic and Monochromatic Correction in the Mid-Infrared