Abstract:This work presents two scalable manufacturing methods of near‐infrared metalenses. The first method produces a 1 cm diameter, 0.53 numerical aperture (NA) polarization‐independent metalens with hydrogenated amorphous silicon. The second method creates a 5 mm diameter, 0.53 NA polarization‐dependent metalens with silicon nanoparticle‐embedded‐resin. Both metalenses exhibit high‐resolution imaging capabilities, making significant progress in metalens production and further metaphotonics technology. Metalenses have revolutionized optical technologies with their superior ability to manipulate light and the potential to replace conventional, bulky optical components. However, their commercialization is hindered by limitations in conventional manufacturing techniques, such as small patterning areas, low throughput, and high cost. In this study, two methods are introduced for scalable and wafer‐scale manufacturing of metalenses operating in the near‐infrared region, aimed at overcoming the abovementioned challenges. The first type of metalens is polarization‐independent and constructed using hydrogenated amorphous silicon cylindrical structures fabricated through direct photolithography. This metalens has a diameter of 1 cm and numerical aperture (NA) of 0.53. The focusing efficiency is confirmed at a 940 nm wavelength, and the focal spot profile approaches the diffraction limit. The second metalens is polarization‐dependent and fabricated using silicon nanoparticle‐embedded‐resin rectangular structures through a cost‐effective nanoimprinting method. This process can produce metalenses with a diameter of 5 mm and an NA of 0.53. Both types of metalenses demonstrate high‐resolution capabilities when imaging a 1951 USAF resolution test target and bioimaging. This research offers innovative pathways for the mass production and large‐scale fabrication of metalenses. It is believed that the work will accelerate the industrialization of metalenses, fostering further advances in optical technology.

Masses of metalenses

8′′ wafer-scale, centimeter-sized, high-efficiency metalenses in the ultraviolet

Fast and Efficient Inverse Design Framework for Multifunctional Metalenses

Scalable manufacturing of high-index atomic layer–polymer hybrid metasurfaces for metaphotonics in the visible

Scalably manufactured high-index atomic layer-polymer hybrid metasurfaces for high-efficiency virtual reality metaoptics in the visible

Wafer‐Scale Manufacturing of Near‐Infrared Metalenses

Large Area Metalenses: Design, Characterization, and Mass Manufacturing

High-efficiency, 80-mm aperture metalens telescope

Ultra-thin, Zoom Capable, Flexible Metalenses with High Focusing Efficiency and Large Numerical Aperture

An ultrabroadband 3D achromatic metalens

Large-area multiwavelength and polarization-insensitive metalenses via multilayer Huygens metasurfaces

All-glass 100 mm Diameter Visible Metalens for Imaging the Cosmos

Visible Metalenses with High Focusing Efficiency Fabricated Using Nanoimprint Lithography

Broadband Achromatic Polarization Insensitive Metalens Design in the Near-Infrared Spectrum

A broadband achromatic metalens for focusing and imaging in the visible

Ultrahigh Numerical Aperture Metalens at Visible Wavelengths

Hyper Resolute Ultra thin Low Cost All-Dielectric Broadband Achromatic Metalenses

3D Printed Multilayer Structures for High Numerical Aperture Achromatic Metalenses

Dielectric metalens by multilayer nanoimprint lithography and solution phase epitaxy

Broadband Achromatic Metalens in the Visible Light Spectrum Based on Fresnel Zone Spatial Multiplexing

Single-layer metalens for achromatic focusing with wide field of view in the visible range