Abstract:This work presents two scalable manufacturing methods of near‐infrared metalenses. The first method produces a 1 cm diameter, 0.53 numerical aperture (NA) polarization‐independent metalens with hydrogenated amorphous silicon. The second method creates a 5 mm diameter, 0.53 NA polarization‐dependent metalens with silicon nanoparticle‐embedded‐resin. Both metalenses exhibit high‐resolution imaging capabilities, making significant progress in metalens production and further metaphotonics technology. Metalenses have revolutionized optical technologies with their superior ability to manipulate light and the potential to replace conventional, bulky optical components. However, their commercialization is hindered by limitations in conventional manufacturing techniques, such as small patterning areas, low throughput, and high cost. In this study, two methods are introduced for scalable and wafer‐scale manufacturing of metalenses operating in the near‐infrared region, aimed at overcoming the abovementioned challenges. The first type of metalens is polarization‐independent and constructed using hydrogenated amorphous silicon cylindrical structures fabricated through direct photolithography. This metalens has a diameter of 1 cm and numerical aperture (NA) of 0.53. The focusing efficiency is confirmed at a 940 nm wavelength, and the focal spot profile approaches the diffraction limit. The second metalens is polarization‐dependent and fabricated using silicon nanoparticle‐embedded‐resin rectangular structures through a cost‐effective nanoimprinting method. This process can produce metalenses with a diameter of 5 mm and an NA of 0.53. Both types of metalenses demonstrate high‐resolution capabilities when imaging a 1951 USAF resolution test target and bioimaging. This research offers innovative pathways for the mass production and large‐scale fabrication of metalenses. It is believed that the work will accelerate the industrialization of metalenses, fostering further advances in optical technology.

Scalably manufactured high-index atomic layer-polymer hybrid metasurfaces for high-efficiency virtual reality metaoptics in the visible

Scalable manufacturing of high-index atomic layer–polymer hybrid metasurfaces for metaphotonics in the visible

Fast and Efficient Inverse Design Framework for Multifunctional Metalenses

Helicity-multiplexed bifocal geometric metalenses at visible wavelength

Masses of metalenses

Ultra-thin, Zoom Capable, Flexible Metalenses with High Focusing Efficiency and Large Numerical Aperture

Visible Metalenses with High Focusing Efficiency Fabricated Using Nanoimprint Lithography

Wafer‐Scale Manufacturing of Near‐Infrared Metalenses

Metasurface eyepiece for augmented reality

8′′ wafer-scale, centimeter-sized, high-efficiency metalenses in the ultraviolet

Large Area Metalenses: Design, Characterization, and Mass Manufacturing

Metasurface for imaging and AR/VR devices

Electrically Actuated Varifocal Lens Based on Liquid-Crystal-Embedded Dielectric Metasurfaces

Metasurface-Embedded Contact Lenses for Holographic Light Projection

Dielectric metalens by multilayer nanoimprint lithography and solution phase epitaxy

Wavelength-actuated varifocal and polarization-insensitive metalenses assisted by monolayer single-celled phase-change metasurfaces

Design of short-focus near-eye optical system for virtual reality using polarization-insensitive metasurface

High‐Throughput Fabrication of Large‐Scale Metaholograms via One‐step Printing

Metasurface wavefront control for high-performance user-natural augmented reality waveguide glasses

All-glass 100 mm Diameter Visible Metalens for Imaging the Cosmos

Inverse design enables large-scale high-performance meta-optics reshaping virtual reality