Investigation of Electrochemical Properties of Li2MnO3 - Li[Ni1/3Co1/3Mn1/3]O2 -LiNiO2 Electrode system for Lithium Secondary Batteries

Jae-Hwan Lim,Ki-Soo Lee,Yang-Kook Sun

DOI: https://doi.org/10.1149/ma2008-02/1/87

2008-08-29

ECS Meeting Abstracts

Abstract:Abstract not Available.

What problem does this paper attempt to address?

Investigation on Structure and Electrochemical Properties of Li[Ni1/3Co1/3Mn1/3]O2 for Lithium Ion Batteries

Xiu Juan Shi,Yong Ping Zheng,Fei Yu Kang,Xin Lu Li,Wan Ci Shen

DOI: https://doi.org/10.4028/www.scientific.net/KEM.336-338.455

2007-01-01

Key Engineering Materials

Abstract:Cathode material Li[Ni1/3Co1/3Mn1/3]O-2 for lithium-ion batteries with layered hexagonal structure was successfully synthesized in sol-gel way. The influences of calcination temperature (from 700 degrees to 1000 degrees C) on the structure and electrochemical behaviors of Li[Ni1/3Co1/3Mn1/3]O-2 were extensively investigated. The results of XRD show that all samples are isostructural with alpha-NaFeO2 with a space group R-3m. XPS analysis shows that the oxidation states of Co and Mn were Co3+ and Mn4+ respectively, while Ni exists as Ni2+ and Ni3+. The charge-discharge experiments show that the sample calcined at 850 degrees C delivers 194.8mAh/g in the first cycle at C/5 rate in 2.5-4.3V potential range.
Electrochemical Properties of LiNi1/3Mn1/3Co1/3O2 Synthesized by Co-precipitation Method

Xiaoyu Zhang,Francois Gendron,Alain Mauger,Lu Qi,Henri Groult,Laurent Perrigaud,Christian M. Julien

DOI: https://doi.org/10.1149/ma2009-02/8/611

2009-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.
Investigation On Structure And Electrochemical Properties Of Li[Ni1/3co1/3mn1/3]O-2 For Lithium Ion Batteries

Xiujuan Shi,Yongping Zheng,Feiyu Kang,Xinlu Li,Wanci Shen

DOI: https://doi.org/10.4028/www.scientific.net/KEM.336-338.455

2007-01-01

Abstract:Cathode material Li[Ni1/3Co1/3Mn1/3]O-2 for lithium-ion batteries with layered hexagonal structure was successfully synthesized in sol-gel way. The influences of calcination temperature (from 700 degrees to 1000 degrees C) on the structure and electrochemical behaviors of Li[Ni1/3Co1/3Mn1/3]O-2 were extensively investigated. The results of XRD show that all samples are isostructural with alpha-NaFeO2 with a space group R-3m. XPS analysis shows that the oxidation states of Co and Mn were Co3+ and Mn4+ respectively, while Ni exists as Ni2+ and Ni3+. The charge-discharge experiments show that the sample calcined at 850 degrees C delivers 194.8mAh/g in the first cycle at C/5 rate in 2.5-4.3V potential range.
Surface Analysis of the Lithium-Rich Cathode Material Li1.2Mn0.54Co0.13Ni0.13NaxO2 by Advanced Electron Microscopy

Wei HUANG,Chun-Yang WU,Yue-Wu ZENG,Chuan-Hong JIN,Ze ZHANG

DOI: https://doi.org/10.3866/pku.whxb201605164

2016-01-01

Acta Physico-Chimica Sinica

Abstract:In this work, Li1.2Mn0.54Co0.13Ni0.13NaxO2 was prepared via an ion-exchange process combined with a solid-state reaction. Aberration-corrected scanning transmission electron microscopy (STEM), energy dispersive X-ray spectroscopy (EDS), and electron energy loss spectroscopy (EELS) were all used to study the surface structure and chemical distribution of the resulting material. Nickel (Ni) was found to be enriched at the surface in regions perpendicular to the lithium diffusion channels (that is, the (200) surfaces) and also exhibited a tendency to diffuse into the lithium (Li) layers, generating a Fm3m rocksalt phase. In contrast, cobalt (Co) segregated along the transition metal (TM) layers of the (001) and (200) surfaces. The results of aging trials demonstrated that Co-enriched layers lead to surface structure instability, as evidenced by the formation of a large number of antisite defects (Li-TM) and rocksalt phase structures at the (001) surface during aging.
Effects On Wet-Coated 0.5Li2MnO3·0.5LiNi1/3Co1/3Mn1/3O2 Cathode Material for Li-Ion Batteries

Jianling, Li

DOI: https://doi.org/10.1149/ma2013-02/14/1083

2013-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.
A Consideration of Electrolyte Additives for LiNi0.5Mn1.5O4/Li4Ti5O12 Lithium-Ion Batteries

Sirong Li,Chunhua Chen,Kang Xu,Jeff Dahn

DOI: https://doi.org/10.1149/ma2013-02/14/1134

2013-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.
Hard X-ray Photoemission Study on Positive Electrode Material Li(Ni1/3Mn1/3Co1/3)O2 for Lithium Ion Battery

Masahiro Shikano,Hiroaki Nitani,Daisuke Mori,Shinji Koike,Hikari Sakaebe,Kuniaki Tatsumi,Hideki Yoshikawa Hideki,Yoshiyuki Yamashita,Shigenori Ueda,Keisuke Kobayashi

DOI: https://doi.org/10.1149/ma2008-02/6/566

2008-08-29

ECS Meeting Abstracts

Abstract:Abstract not Available.
Preparation and electrochemical profile of Li0.33MnO2 nanorods as cathode material for secondary lithium batteries

Ping He,Jia-Yan Luo,Xin-Hui Yang,Yong-Yao Xia

DOI: https://doi.org/10.1016/j.electacta.2009.07.062

IF: 6.6

2009-01-01

Electrochimica Acta

Abstract:We report the preparation of Li0.33MnO2 nanorods from γ-MnO2 nanorods reacted with LiNO3 by a low temperature solid-state reaction method. The Li0.33MnO2 nanorods tend to be oriented along the b-axis, and show an improved rate capability and cycling performance as positive electrode for lithium battery. It delivers a discharge capacity of 199 and 129mAh/g at the current rate of 0.1C (20mA/g) and 2C, respectively, and keeps 92% of initial capacity over 100 cycles. Li0.33MnO2 nanorods reduce both the electrode bulk resistance and charge-transfer resistance for lithium-ion intercalation. The advantage of nanorods results from good electrical conduction, appropriate length of nanorod and small volume expansion from appropriate orientations of tunnels structure.
Preparation and electrochemical investigation of single-crystal LiNi 0.6 Co 0.2 Mn 0.2 O 2 for high-performance lithium-ion batteries

Rong-Zheng Tian,Ze-Xin Wang,Xiao-Qing Wang,Hong-Zhou Zhang,Yue Ma,Da-Wei Song,Xi-Xi Shi,Lian-Qi Zhang

DOI: https://doi.org/10.1039/d1nj05359k

IF: 3.3

2022-01-01

New Journal of Chemistry

Abstract:Ni-rich layered cathode materials have large reversible capacity.

chemistry, multidisciplinary
Synthetic Optimization and Electrochemical Properties of LiNi_(0.5)Mn_(0.5)O_2 Cathode Materials for Lithium-ion Batteries

Wen Lei,Qi Lu,Xu Guoxiang

2006-01-01

Chemistry

Abstract:LiNi- 0.5Mn- 0.5O-2 cathode materials were synthesized from LiOH·H-2O and coprecipitated metal hydroxide, Ni- 0.5Mn- 0.5(OH)-2. Structural and the electrochemical properties were characterized by XRD, SEM and galvanostatic cycling, and the effect of excess lithium on structural and electrochemical properties of LiNi- 0.5Mn- 0.5O-2 was also investigated. SEM results showed that both the Ni- 0.5Mn- 0.5(OH)-2 and LiNi- 0.5Mn- 0.5O-2 powders are composed of smaller primary particles. In the voltage range of 2.5～4.4V,the LiNi- 0.5Mn- 0.5O-2 cathode material has an initial discharge specific capacity of 130mAh/g, and the capacity retain rate is 87.8% up to 50 cycles at 0.2C rate. The effect of excess lithium on LiNi- 0.5Mn- 0.5O-2 structure give rise to higher capacity and better cycle performance. The Li- 1.1Ni- 0.5Mn- 0.5O-2 cathode material has an initial discharge specific capacity of 149mAh/g, and the capacity retained 92.6% at 0.2C rate after 50 charge-discharge cycles.
Fatigue in 0.5Li(2)mno(3):0.5Li(ni1/3co1/3mn1/3)o-2 Positive Electrodes for Lithium Ion Batteries

Lars Riekehr,Jinlong Liu,Bjoern Schwarz,Florian Sigel,Ingo Kerkamm,Yongyao Xia,Helmut Ehrenberg

DOI: https://doi.org/10.1016/j.jpowsour.2016.06.014

IF: 9.2

2016-01-01

Journal of Power Sources

Abstract:Two different Li-rich nickel–cobalt–manganese-oxide (Li-rich NCM) active materials with the same nominal composition 0.5Li2MnO3:0.5Li(Ni1/3Co1/3Mn1/3)O2 but different pristine nano structure have been analyzed structurally and electrochemically in different cycling states. For structural characterization, transmission electron microscopy (TEM) and high resolution synchrotron powder diffraction (S-XRD) experiments were conducted. The changes in structure with increasing cycle number are correlated with characteristic features in the corresponding electrochemical dQ/dV-profiles that were obtained by galvanostatically cycling the two different active materials. The presented data demonstrates that structural changes upon cycling, e.g. LiMnO2 and spinel formation, strongly depend on the degree oxygen is involved in the reversible charge compensation for delithiation/lithiation. According to our data, firstly a twin-like environment with nanometer dimensions is formed within the R-3m matrix during the initial cycle, which then gradually transforms into a spinel-like structure with increasing cycle number. As another result, we can show that Li2MnO3 to LiMnO2 transformation is not directly dependent in the irreversible oxygen loss in the first cycle but more importantly on transition metal migration. A model is presented explaining the dependency of LiMnO2 and spinel formation on the ability of Li-rich active materials to include oxygen in the charge compensation process.
Aging of LiNi1/3Mn1/3Co1/3O2 as Cathode Material for Li-ion Batteries

Xiaoyu Zhang,Francois Gendron,Alain Mauger,Lu Qi,Christian Julien

DOI: https://doi.org/10.1149/ma2009-02/7/436

2009-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.
Electrochemical Performance of All-Solid-state Li Batteries Based LiMn0.5Ni0.5O2 Cathode and NASICON-type Electrolyte

J. Xie,N. Imanishi,T. Zhang,A. Hirano,Y. Takeda,O. Yamamoto,X. B. Zhao,G. S. Cao

DOI: https://doi.org/10.1016/j.jpowsour.2010.06.066

IF: 9.2

2010-01-01

Journal of Power Sources

Abstract:LiNi0.5Mn0.5O2 thin films have been deposited on the NASICON-type glass ceramics, Li1+x+yAlxTi2−xSiyP3−yO12 (LATSP), by radio frequency (RF) magnetron sputtering followed by annealing. The films have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman spectroscopy. All-solid-state Li/PEO18-Li(CF3SO2)2N/LATSP/LiNi0.5Mn0.5O2/Au cells are fabricated using the LiNi0.5Mn0.5O2 thin films and the LATSP electrolyte. The electrochemical performance of the cells is investigated by galvanostatic cycling, cyclic voltammetry (CV), potentiostatic intermittent titration technique (PITT) and electrochemical impedance spectroscopy (EIS). Interfacial reactions between LiNi0.5Mn0.5O2 and LATSP occur at a temperature as low as 300°C with the formation of Mn3O4, resulting in an increased obstacle for Li-ion diffusion across the LiNi0.5Mn0.5O2/LATSP interface. The electrochemical performance of the cells is limited by the interfacial resistance between LATSP and LiNi0.5Mn0.5O2 as well as the Li-ion diffusion kinetics in LiNi0.5Mn0.5O2 bulk.
Methods for Promoting Electrochemical Properties of LiNi_(l/3) Co_(l/3) Mn_(l/3)O_2 for Lithium-Ion Batteries

Bao Li

2013-01-01

Abstract:One popular study of the recent research is to develop the cathode materials for lithium-ion batteries. As a new cathode material for lithium-ion batteries, the LiNil/3Col/3Mnl/3O2 has drawn widespread attention because of its high capacity, high cut-off voltage and high tap density. Its theoretical capacity is 277.8 mAh/g. The crystal structure of LiNil/3Col/3Mnl/3O2 is α-NaFeO 2 . The structural and morphological features of the LiNil/3Col/3Mnl/3O2 are introduced in this paper. The emphasis is to present the methods for promoting electrochemical properties. The electrochemical properties and structure characteristics are discussed. And the prospect of layered LiNil/3Col/3Mnl/3O2 is forecast in the end.
Preparation and Electrochemical Properties of LiNi2/3Co1/6Mn1/6O2 Cathode Material for Lithium-Ion Batteries

Meijie Zhu,Jiangang Li,Zhibei Liu,Li Wang,Yuqiong Kang,Zhaohan Dang,Jiasen Yan,Xiangming He

DOI: https://doi.org/10.3390/ma14071766

IF: 3.4

2021-01-01

Materials

Abstract:The cathode material LiNi2/3Co1/6Mn1/6O2 with excellent electrochemical performance was prepared successfully by a rheological phase method. The materials obtained were characterized by X-ray diffraction, scanning electron microscopy, electrochemical impedance spectroscopy and charge-discharge tests. The results showed that both calcination temperatures and atmosphere are very important factors affecting the structure and electrochemical performance of LiNi2/3Co1/6Mn1/6O2 material. The sample calcinated at 800 °C under O2 atmosphere displayed well-crystallized particle morphology, a highly ordered layered structure with low defects, and excellent electrochemical performance. In the voltage range of 2.8–4.3 V, it delivered capacity of 188.9 mAh g−1 at 0.2 C and 130.4 mAh g−1 at 5 C, respectively. The capacity retention also reached 93.9% after 50 cycles at 0.5 C. All the results suggest that LiNi2/3Co1/6Mn1/6O2 is a promising cathode material for lithium-ion batteries.
Electronic Structure and Properties of Li_2MnO_3·LiMO_2(M=Co,Ni) by Density Functional Theory

Liangfei Xu

2013-01-01

Abstract:A systematic first principles calculation based on density functional theory is carried out to discuss the structures and properties of LiMO2(M=Co,Ni)and Li2 MnO3,the lithium removal process of Li2 MnO3 is studied from an energetic point of view.In LiMO2(M=Co,Ni)and Li2 MnO3 crystal structures,lithium exists in the Li+form,and transition metals(Co,Ni,Mn)are covalently bound to O. Because of spin polarization,the energy band gap of LiNiO2system is much smaller than that of LiCoO2 and thus LiNiO2 is supposed to show batter conductivity performance.In the process of Li+removal from Li2 MnO3,it happens in the lithium layer at the beginning of charging process,and further removal is likely to take place at the Mn2/3Li1/3layer.The electric structure of the LixMnO3indicates that the charge compensation associated with lithium removal is performed mainly by the oxidation of oxygen,with only a small part of Mn oxidation.
Structural and electrochemical studies of α-manganese dioxide (α-MnO2)

C.S. Johnson,D.W. Dees,M.F. Mansuetto,M.M. Thackeray,D.R. Vissers,D. Argyriou,C.-K. Loong,L. Christensen

DOI: https://doi.org/10.1016/s0378-7753(96)02633-x

IF: 9.2

1997-10-01

Journal of Power Sources

Abstract:The structural and electrochemical properties of α-MnO2, prepared by acid digestion of Mn2O3, and its lithiated derivatives xLi2O · MnO2 (0 ≤ x ≤ 0.25) have been investigated as insertion compounds in the search for new and viable cathode materials for rechargeable 3 V batteries. The α-MnO2 product fabricated by this technique contains water within the large (2 × 2) channels of the structure; the water can be removed from the α-MnO2 framework without degradation of the structure, and then at least partially replaced by Li2O (lithium oxide). The Li2O-doped α-MnO2 electrodes, described generically as xLi2O · MnO2, stabilize the structure and provide higher capacities on cycling than the parent material. The structures of these α-MnO2-type electrode materials are described, and electrochemical data are presented for both liquid electrolyte and polymer electrolyte Li/α-MnO2 and Li/xLi2O · MnO2 cells.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Synthesis and microstructure characterization of Li[Ni1/3Mn1/3Co1/3]O2for lithium ion batteries cathode

Qing-yun LIN,Wen-hao GUAN,Jie MENG,Shi-yan WU,Jing-yuan PEI,Tao CHEN,Yue-wu ZENG,Xiao WEI,Ji-xue LI,Ze ZHANG

DOI: https://doi.org/10.3969/j.issn.1000-6281.2018.01.002

2018-01-01

Abstract:In this work,an orthogonal experiment with four factors and three levels were conducted to study the effect of preparation conditions on the microstructure and electrochemical performance of Li[Ni1/3Mn1/3Co1/3]O2(NMC). The analysis suggests that calcination temperature is the main factor affects the specific capacity of NMC. The morphology and microstructure of the NMC were investigated by scanning electron microscopy(SEM)and transmission electron microscopy(TEM). By improving the equipment condition based on the orthogonal analysis,NMC with small particle sizes,complete layered structure and excellent crystallinity which would contribute positively to the electrochemical performance can be prepared.
(Keynote) MnPO4-Coating for Improved Long-Term Performance of Li(Ni0.4Co0.2Mn0.4)O2 in Ionic Liquid-Based Electrolytes

Zhen Chen,Guk-Tae Kim,Dominic Bresser,Sangsik Jeong,Mark Copley,Janyi Lin,Zexiang Shen,Stefano Passerini

DOI: https://doi.org/10.1149/ma2018-02/2/103

2018-01-01

ECS Meeting Abstracts

Abstract:MnPO4-coated LiNi0.4Co0.2Mn0.4O2 (MP-NCM) [1] is demonstrated to be a high performance lithium battery cathode material in combination with the room-temperature ionic liquid-based electrolyte consisting of LiTFSI-PYR14FSI (2:8 molar ratio). The MnPO4 coating acts as an ideal protective layer to physically prevent the contact between the NCM active material and the electrolyte, thus, successfully stabilizing the electrode/electrolyte interface and preventing detrimental side reactions even in conventional, carbonate-based electrolytes [2]. As a result, MP-NCM-based electrodes reveal greatly enhanced C rate capability and cycling stability – even under extreme conditions like extended operational potential windows, elevated temperature, and higher active material mass loadings. Employing an ionic liquid-based electrolyte allows for outstanding cycling stability of lab-scale pouch cells, offering a capacity retention of well above 85% after 2000 cycles. The superior electrochemical behavior of MP-NCM compared to as-synthesized NCM is assigned to the superior stability of the electrode/electrolyte interface and structural integrity when applying a MnPO4 coating, rendering this approach highly promising also for other state-of-the-art and next generation lithium battery cathodes. References [1] Z. Chen, D. Chao, J. Liu, M. Copley, J. Lin, Z. Shen, G.-T. Kim, S. Passerini, J. Mater. Chem. A, 5, 2017, 15669 [2] Z. Chen, G.-T. Kim, D. Bresser, T. Diemant, S. Jeong, M Copley, R. J. Behm, J. Lin, Z. Shen, Stefano Passerini, Energy & Environmental Science (2018) submitted
Research Progress in Cathode Material Li (ni1/3co1/3mn1/3) O2 for Li-ion Battery

LIU Yong-xin,MA Xiao-hua,QIU Wei-li,BU Yuan,XU Hai-jie,YANG Qing-he

DOI: https://doi.org/10.3969/j.issn.1001-1579.2005.05.029

2005-01-01

Abstract:Research status of cathode material of Li(Ni_(1/3)Co_(1/3)Mn_(1/3))O_2 for Li-ion batteries was summarized.The progress in the material including its structure,synthesis,electrochemical characteristics and thermal stability were introduced in detail and its future development was prospected.

Investigation of Electrochemical Properties of Li2MnO3 - Li[Ni1/3Co1/3Mn1/3]O2 -LiNiO2 Electrode system for Lithium Secondary Batteries

Investigation on Structure and Electrochemical Properties of Li[Ni<sub>1/3</sub>Co<sub>1/3</sub>Mn<sub>1/3</sub>]O<sub>2</sub> for Lithium Ion Batteries

Electrochemical Properties of LiNi<sub>1/3</sub>Mn<sub>1/3</sub>Co<sub>1/3</sub>O<sub>2</sub> Synthesized by Co-precipitation Method

Investigation On Structure And Electrochemical Properties Of Li[Ni1/3co1/3mn1/3]O-2 For Lithium Ion Batteries

Surface Analysis of the Lithium-Rich Cathode Material Li<sub>1.2</sub>Mn<sub>0.54</sub>Co<sub>0.13</sub>Ni<sub>0.13</sub>Na<sub><i>x</i></sub>O<sub>2</sub> by Advanced Electron Microscopy

Effects On Wet-Coated 0.5Li<sub>2</sub>MnO<sub>3</sub>·0.5LiNi<sub>1/3</sub>Co<sub>1/3</sub>Mn<sub>1/3</sub>O<sub>2</sub> Cathode Material for Li-Ion Batteries

A Consideration of Electrolyte Additives for LiNi<sub>0.5</sub>Mn<sub>1.5</sub>O<sub>4</sub>/Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> Lithium-Ion Batteries

Hard X-ray Photoemission Study on Positive Electrode Material Li(Ni1/3Mn1/3Co1/3)O2 for Lithium Ion Battery

Preparation and electrochemical profile of Li0.33MnO2 nanorods as cathode material for secondary lithium batteries

Preparation and electrochemical investigation of single-crystal LiNi 0.6 Co 0.2 Mn 0.2 O 2 for high-performance lithium-ion batteries

Synthetic Optimization and Electrochemical Properties of LiNi_(0.5)Mn_(0.5)O_2 Cathode Materials for Lithium-ion Batteries

Fatigue in 0.5Li(2)mno(3):0.5Li(ni1/3co1/3mn1/3)o-2 Positive Electrodes for Lithium Ion Batteries

Aging of LiNi<sub>1/3</sub>Mn<sub>1/3</sub>Co<sub>1/3</sub>O<sub>2</sub> as Cathode Material for Li-ion Batteries

Electrochemical Performance of All-Solid-state Li Batteries Based LiMn0.5Ni0.5O2 Cathode and NASICON-type Electrolyte

Methods for Promoting Electrochemical Properties of LiNi_(l/3) Co_(l/3) Mn_(l/3)O_2 for Lithium-Ion Batteries

Preparation and Electrochemical Properties of LiNi<sub>2/3</sub>Co<sub>1/6</sub>Mn<sub>1/6</sub>O<sub>2</sub> Cathode Material for Lithium-Ion Batteries

Electronic Structure and Properties of Li_2MnO_3·LiMO_2(M=Co,Ni) by Density Functional Theory

Structural and electrochemical studies of α-manganese dioxide (α-MnO2)

Synthesis and microstructure characterization of Li[Ni1/3Mn1/3Co1/3]O2for lithium ion batteries cathode

(Keynote) MnPO4-Coating for Improved Long-Term Performance of Li(Ni0.4Co0.2Mn0.4)O2 in Ionic Liquid-Based Electrolytes

Research Progress in Cathode Material Li (ni1/3co1/3mn1/3) O2 for Li-ion Battery

Investigation of Electrochemical Properties of Li2MnO3 - Li[Ni1/3Co1/3Mn1/3]O2 -LiNiO2 Electrode system for Lithium Secondary Batteries

Investigation on Structure and Electrochemical Properties of Li[Ni<sub>1/3</sub>Co<sub>1/3</sub>Mn<sub>1/3</sub>]O<sub>2</sub> for Lithium Ion Batteries

Electrochemical Properties of LiNi<sub>1/3</sub>Mn<sub>1/3</sub>Co<sub>1/3</sub>O<sub>2</sub> Synthesized by Co-precipitation Method

Investigation On Structure And Electrochemical Properties Of Li[Ni1/3co1/3mn1/3]O-2 For Lithium Ion Batteries

Surface Analysis of the Lithium-Rich Cathode Material Li&lt;sub&gt;1.2&lt;/sub&gt;Mn&lt;sub&gt;0.54&lt;/sub&gt;Co&lt;sub&gt;0.13&lt;/sub&gt;Ni&lt;sub&gt;0.13&lt;/sub&gt;Na&lt;sub&gt;&lt;i&gt;x&lt;/i&gt;&lt;/sub&gt;O&lt;sub&gt;2&lt;/sub&gt; by Advanced Electron Microscopy

Effects On Wet-Coated 0.5Li<sub>2</sub>MnO<sub>3</sub>·0.5LiNi<sub>1/3</sub>Co<sub>1/3</sub>Mn<sub>1/3</sub>O<sub>2</sub> Cathode Material for Li-Ion Batteries

A Consideration of Electrolyte Additives for LiNi<sub>0.5</sub>Mn<sub>1.5</sub>O<sub>4</sub>/Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> Lithium-Ion Batteries

Hard X-ray Photoemission Study on Positive Electrode Material Li(Ni1/3Mn1/3Co1/3)O2 for Lithium Ion Battery

Preparation and electrochemical profile of Li0.33MnO2 nanorods as cathode material for secondary lithium batteries

Preparation and electrochemical investigation of single-crystal LiNi 0.6 Co 0.2 Mn 0.2 O 2 for high-performance lithium-ion batteries

Synthetic Optimization and Electrochemical Properties of LiNi_(0.5)Mn_(0.5)O_2 Cathode Materials for Lithium-ion Batteries

Fatigue in 0.5Li(2)mno(3):0.5Li(ni1/3co1/3mn1/3)o-2 Positive Electrodes for Lithium Ion Batteries

Aging of LiNi<sub>1/3</sub>Mn<sub>1/3</sub>Co<sub>1/3</sub>O<sub>2</sub> as Cathode Material for Li-ion Batteries

Electrochemical Performance of All-Solid-state Li Batteries Based LiMn0.5Ni0.5O2 Cathode and NASICON-type Electrolyte

Methods for Promoting Electrochemical Properties of LiNi_(l/3) Co_(l/3) Mn_(l/3)O_2 for Lithium-Ion Batteries

Preparation and Electrochemical Properties of LiNi<sub>2/3</sub>Co<sub>1/6</sub>Mn<sub>1/6</sub>O<sub>2</sub> Cathode Material for Lithium-Ion Batteries

Electronic Structure and Properties of Li_2MnO_3·LiMO_2(M=Co,Ni) by Density Functional Theory

Structural and electrochemical studies of α-manganese dioxide (α-MnO2)

Synthesis and microstructure characterization of Li[Ni1/3Mn1/3Co1/3]O2for lithium ion batteries cathode

(Keynote) MnPO4-Coating for Improved Long-Term Performance of Li(Ni0.4Co0.2Mn0.4)O2 in Ionic Liquid-Based Electrolytes

Research Progress in Cathode Material Li (ni1/3co1/3mn1/3) O2 for Li-ion Battery

Surface Analysis of the Lithium-Rich Cathode Material Li<sub>1.2</sub>Mn<sub>0.54</sub>Co<sub>0.13</sub>Ni<sub>0.13</sub>Na<sub><i>x</i></sub>O<sub>2</sub> by Advanced Electron Microscopy